1. Introdução
This manual provides detailed instructions for the installation, operation, and maintenance of your JONSBO D31 MESH Micro ATX Computer Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.
The JONSBO D31 MESH is a compact Micro ATX chassis designed for efficient cooling and broad hardware compatibility, supporting MATX/ITX motherboards, large GPUs, and various cooling solutions.
2. Principais características
- Mesh Panel Design: The mesh front and top panels enhance ventilation and heat dissipation, contributing to lower system temperatures.
- Compact Size, High Compatibility: Despite its Micro ATX form factor, the D31 MESH supports high-performance components including GPUs up to 400mm in length and various AIO liquid coolers.
- Adjustable Power Supply Position: Features a 4-level height adjustment for the power supply unit (PSU), accommodating different hardware configurations and PSU lengths (100mm-220mm).
- Design sem ferramentas: Multiple tool-free elements simplify the assembly process and maintenance.
- Suporte de refrigeração: Supports air coolers up to 168mm high and AIO liquid coolers up to 360mm (top) or 360mm (bottom).
3. Case Components Overview
Familiarize yourself with the various parts of the JONSBO D31 MESH case before beginning assembly.
Figura 3.1: Explodido view of the JONSBO D31 MESH case, illustrating its modular design for easy access and service.
Figura 3.2: interno view of the D31 MESH case, highlighting the spacious layout for component installation.
Figura 3.3: Example build within the D31 MESH case, demonstrating component fitment.
4. Configuração e instalação
Follow these general steps for assembling your PC within the JONSBO D31 MESH case. Refer to your component manuals for specific installation details.
4.1 Preparando o Caso
- Remove the side panels and top panel. The side panels typically unclip or slide off, while the top panel may be secured with thumbscrews.
- Identify the motherboard standoffs. Install additional standoffs if required by your motherboard's form factor (MATX/ITX).
4.2 Instalação da placa-mãe
- Instale o painel de E/S na abertura traseira do gabinete.
- Carefully align your MATX or ITX motherboard with the standoffs and I/O shield.
- Prenda a placa-mãe com parafusos.
4.3 Instalação da Unidade de Fonte de Alimentação (PSU)
The D31 MESH offers adjustable PSU mounting positions. Choose the position that best suits your GPU length and cooling configuration.
Figure 4.1: Illustration of the 4-level adjustable power supply position, demonstrating how it affects GPU and cooling compatibility. The power supply can be installed in a two-way orientation.
- Determine the optimal PSU mounting level based on your GPU length and desired cooling setup.
- Mount your ATX or SFX PSU (100mm-220mm length) into the designated bracket.
- Secure the PSU bracket to the case.
4.4 Instalação da placa gráfica (GPU)
The case supports GPUs up to 400mm in length, depending on the PSU position.
- Remova as tampas dos slots PCI-E necessárias da parte traseira do gabinete.
- Insert your GPU into the primary PCI-E slot on the motherboard.
- Fixe a placa de vídeo com parafusos.
4.5 Instalação do Sistema de Refrigeração
The D31 MESH supports various air and liquid cooling configurations.
Figure 4.2: Fan and radiator compatibility diagram for the D31 MESH, illustrating support for various sizes and configurations.
- Air Coolers: Supports air coolers up to 168mm in height.
- AIO Liquid Coolers: Supports 240/280/360mm AIO radiators on the top, and 240/360mm AIO radiators on the bottom.
- Install fans and radiators according to your chosen configuration, ensuring proper airflow direction.
4.6 Instalação da unidade de armazenamento
The case supports 3.5" HDD x 1 and 2.5" SSD x 2 (on the back of the motherboard tray).
Figure 4.3: Storage drive mounting locations for 3.5" HDD and 2.5" SSDs.
- Mount your storage drives into the designated bays.
- Secure them with screws.
4.7 Gerenciamento de cabos
Route all cables neatly to ensure optimal airflow and a clean build. Utilize the cable tie-down points behind the motherboard tray.
5. Compatibility Guidelines
The JONSBO D31 MESH is designed to accommodate a range of components. Please observe the following compatibility guidelines:
- Placa-mãe: Micro ATX (MATX) / Mini-ITX (ITX)
- Comprimento da GPU: 330mm - 400mm (varies with PSU position)
- Tipo de fonte de alimentação: ATX / SFX (100mm - 220mm length)
- Altura do refrigerador de ar da CPU: Até 168 mm
- AIO Radiator Support:
- Superior: 240 mm, 280 mm, 360 mm
- Bottom: 240mm, 360mm
- Armazenar: 1 disco rígido de 3.5", 2 SSDs de 2.5"
6. Airflow and Cooling
The D31 MESH case features a high-density mesh design on the front and top panels to facilitate excellent airflow. Proper fan configuration is crucial for maintaining optimal component temperatures.
Figure 6.1: Vertical air duct structure for efficient cooling. The mesh panels allow for unrestricted intake and exhaust.
Video 6.1: Official JONSBO D31 MicroATX case overview, demonstrating its features and design. This video highlights the case's internal layout and cooling capabilities.
Consider installing intake fans at the bottom and exhaust fans at the top for an effective vertical airflow path. The offset fan installation position at the bottom helps reduce resistance for graphics card cooling.
7. Especificações
| Recurso | Especificação |
|---|---|
| Nome do modelo | D31 MESH |
| Tipo de caso | Torre Micro ATX |
| Compatibilidade da placa-mãe | Micro ATX, Mini-ITX |
| Dimensões (CxLxA) | 440 mm x 205 mm x 363 mm (17.32 x 8.07 x 14.29 polegadas) |
| Material | Metal |
| Cor | Preto |
| Peso do item | 6.85 quilogramas (15.07 libras) |
| Espaço livre no comprimento da GPU | 330mm - 400mm (dependent on PSU position) |
| CPU Cooler Height Clearance | 168 mm |
| PSU Type & Length | ATX / SFX, 100mm - 220mm (adjustable) |
| Suporte do radiador (superior) | 240 mm, 280 mm, 360 mm |
| Radiator Support (Bottom) | 240 mm, 360 mm |
| Baías de Unidade | 1 disco rígido de 3.5", 2 SSDs de 2.5" |
| Portas de E / S frontais | USB 3.0 x 1, USB 3.2 Gen 2 Type-C x 1, Headphone Audio x 1 |
8. Solução De Problemas
Se você encontrar problemas durante ou após a montagem, considere as seguintes etapas comuns de solução de problemas:
- Sem energia: Certifique-se de que todos os cabos de alimentação (ATX de 24 pinos, CPU de 8 pinos, alimentação da GPU) estejam firmemente conectados. Verifique se a chave da fonte de alimentação está na posição "ligado". Verifique as conexões do botão liga/desliga do painel frontal com a placa-mãe.
- Superaquecimento: Confirm all fans are spinning and oriented correctly for optimal airflow (intake/exhaust). Ensure CPU cooler and GPU fans are functioning. Check for proper thermal paste application on the CPU.
- Ruído do ventilador: Inspect fans for obstructions or loose mounting. Ensure fan speeds are appropriately controlled via BIOS or software.
- Component Fitment Issues: Double-check component dimensions against the case specifications, especially for large GPUs, CPU coolers, and PSU length. Adjust PSU position if necessary.
- Painel frontal de E/S não funciona: Verify that all front panel connectors (USB, audio, power/reset switches, LEDs) are correctly plugged into the motherboard headers.
9. Manutenção
A manutenção regular ajuda a prolongar a vida útil dos componentes do seu PC e garante um desempenho ideal.
- Limpeza de pó: Periodically clean dust filters (if applicable) and internal components using compressed air. Ensure the system is powered off and unplugged before cleaning.
- Gerenciamento de cabos: Ensure cables remain neatly routed to prevent interference with airflow.
- Segurança do painel: Periodically check that all panels and screws are securely fastened.
10. Garantia e Suporte
Para informações sobre garantia e suporte técnico, consulte o site oficial da JONSBO. webNo site ou entre em contato com o revendedor. Guarde o comprovante de compra para eventuais solicitações de garantia.
