Instruções importantes de segurança
Leia atentamente este manual antes de usar o aparelho e guarde-o para futuras consultas. O não cumprimento destas instruções pode resultar em choque elétrico, incêndio ou ferimentos graves.
- Certifique-se sempre de que o ventilador esteja colocado em uma superfície estável e plana para evitar que tombe.
- Não introduza os dedos ou quaisquer objetos na grelha da ventoinha enquanto esta estiver em funcionamento.
- Desligue o ventilador da tomada antes de limpá-lo ou realizar qualquer manutenção.
- Keep the power cord away from heated surfaces and do not run it under carpets.
- This appliance is for indoor use only. Do not use outdoors or in wet conditions.
- Não utilize o ventilador se o cabo ou a ficha estiverem danificados. Contacte pessoal de assistência técnica qualificado para efetuar a reparação.
Produto acimaview
The Cecotec EnergySilence 600 Woodstyle Pedestal Fan is designed to provide powerful and quiet airflow for your comfort. It features a robust motor, adjustable height, and an oscillation function to distribute air effectively.

Figure 1: Fully assembled Cecotec EnergySilence 600 Woodstyle Pedestal Fan, showcasing its design and airflow.
Configuração e montagem
Follow these steps to assemble your Cecotec EnergySilence 600 Woodstyle Pedestal Fan:
- Montagem da base: Attach the main pole to the circular base. Ensure it is securely fastened using the provided screws or locking mechanism.
- Ajuste da vara telescópica: Insert the upper telescopic pole into the lower pole. Adjust the height to your desired level (between 90 cm and 125 cm) and secure it with the height adjustment knob.
- Motor Unit Attachment: Mount the fan motor unit onto the top of the telescopic pole. Ensure it clicks into place or is secured with the designated screw.
- Grille and Blade Installation: Carefully attach the rear grille to the motor unit. Then, place the fan blades onto the motor shaft, securing them with the retaining cap. Finally, attach the front grille and secure it with the clips or screws provided.

Figure 2: Illustration of the fan's adjustable height feature, allowing customization from 90 cm to 125 cm.
Once assembled, ensure all connections are tight and the fan is stable before plugging it into a power outlet.
Instruções de operação
Your Cecotec fan offers simple controls for optimal comfort.
- Ligar/desligar: Plug the fan into a standard electrical outlet. Use the control knob located on the motor unit to turn the fan on or off.
- Seleção de velocidade: Rotate the control knob to select one of the three available speeds:
- Baixo: For gentle airflow and minimal noise.
- Médio: For moderate cooling.
- Alto: For maximum airflow and rapid cooling.
- Função de oscilação: To activate the automatic oscillation, press down the oscillation pin located on top of the motor unit. The fan head will sweep from side to side, distributing air across a wider area. Pull the pin up to stop oscillation and direct airflow in a fixed direction.
- Ajuste de inclinação: The fan head can be manually tilted up or down to direct airflow precisely where needed. Gently push or pull the fan head to adjust its angle.

Figura 3: Close view of the control knob on the fan's motor unit, used for power and speed selection.

Figure 4: The fan operating with its oscillation feature, effectively circulating air within a living space.
Manutenção e Cuidados
Regular cleaning and proper care will ensure the longevity and efficient operation of your fan.
- Limpeza:
- Sempre desligue o ventilador antes de limpá-lo.
- Use um pano macio e macioamp Use um pano para limpar as superfícies externas. Não utilize produtos de limpeza abrasivos ou solventes.
- To clean the fan blades and inside the grilles, you may need to carefully remove the front grille. Refer to the assembly instructions for reverse steps. Use a soft brush or vacuum cleaner to remove dust and debris.
- Certifique-se de que todas as peças estejam completamente secas antes de remontar e ligar o ventilador.
- Armazenar: When not in use for extended periods, store the fan in a cool, dry place, preferably in its original packaging to protect it from dust and damage.
- Lubrificação do Motor: The fan motor is permanently lubricated and requires no additional lubrication.
Solução de problemas
If you encounter any issues with your fan, refer to the following common problems and solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| O ventilador não liga. | No power supply; fan unplugged; power outlet faulty; control knob not set to ON. | Check if the fan is properly plugged into a working outlet. Ensure the control knob is turned to a speed setting (Low, Medium, or High). |
| Fluxo de ar fraco. | A velocidade do ventilador está muito baixa; as grades ou as pás estão sujas. | Increase the fan speed. Clean the fan grilles and blades to remove dust buildup. |
| Ruídos ou vibrações incomuns. | Loose parts; fan not on a stable surface; debris inside the grille. | Ensure all assembly screws are tight. Place the fan on a flat, stable surface. Unplug and check for any foreign objects inside the grilles or around the blades. |
| A oscilação não está funcionando. | Pino de oscilação não pressionado. | Press the oscillation pin down firmly to engage the oscillation function. |
If the problem persists after trying these solutions, please contact Cecotec customer support or your retailer for assistance.
Especificações
- Modelo: EnergySilence 600 Woodstyle
- Número do modelo: 08233
- Marca: Cecotec
- Poder: 50 W
- Diâmetro do ventilador: 16 polegadas (40 cm)
- Número de Lâminas: 4
- Configurações de velocidade: 3 (Baixo, Médio, Alto)
- Oscilação: Automático
- Altura ajustável: 90 cm a 125 cm
- Dimensões (montadas): Approximately 42 cm (depth) x 42 cm (width) x 134 cm (height)
- Peso: 5.7 kg
- Fonte de energia: Cabo elétrico
- Produto ASIN: B0BPZP1TY1
Garantia e Suporte ao Cliente
This Cecotec product is covered by a manufacturer's warranty. For detailed information regarding the warranty period, terms, and conditions, please refer to the warranty card included with your product or visit the official Cecotec website.
For technical assistance, spare parts, or any inquiries not covered in this manual, please contact Cecotec customer support. Keep your purchase receipt and product model number (08233) handy when contacting support.
You can find contact information for Cecotec customer service on their official website ou através do seu revendedor.