Manual do Usuário do Controle Remoto IR Dish Network 20.1

Introdução

The Dish Network 20.1 IR Remote Control is designed to operate your Dish Network receiver and a television. This remote functions in Infrared (IR) mode, requiring a direct line of sight between the remote and the device being controlled. It is an upgraded version of the 20.0 remote, featuring expanded codes for compatibility with a wider range of newer televisions.

Principais características

• Operates Dish Network receivers in IR mode.
• Compatible with various television models.
• Capable of learning codes from other IR remotes.
• Requires four AAA batteries for operation.

Configurar

1. Instalação da bateria

The Dish Network 20.1 remote control requires four (4) AAA batteries.

1. Localize a tampa do compartimento da bateria na parte traseira do controle remoto.
2. Deslize a tampa para baixo e levante-a para removê-la.
3. Insert four AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Recoloque a tampa do compartimento da bateria deslizando-a de volta para o lugar até ouvir um clique.

Imagem: Frente view of the Dish Network 20.1 IR Remote Control, showing button layout.

2. Pairing with Dish Network Receiver (IR Mode)

The 20.1 remote is designed to control Dish Network receivers in IR mode. For newer receivers like the Hopper and Joey, which may have originally shipped with a UHF remote, you might need to configure the receiver to accept IR commands. Consult your receiver's manual for specific instructions on enabling IR mode.

Typically, the remote will control the Dish receiver automatically once batteries are installed and the receiver is set to IR mode.

3. Programming for Television Control

To control your television's power, volume, and input functions, you will need to program the remote with your TV's code.

1. Ligue sua televisão.
2. Pressione e segure o TV mode button on the remote until all four mode buttons (SAT, TV, DVD, AUX) illuminate.
3. Solte o TV botão. O TV button should remain lit.
4. Enter the 3-digit TV code for your television brand. Refer to the code list provided with your remote or search online for "Dish Network 20.1 TV codes" for your specific TV brand.
5. After entering the code, the TV button should flash three times and then turn off, indicating successful programming. If it does not flash, repeat the process.
6. Teste o controle remoto pressionando o botão. PODER button to turn off your TV. If it works, the programming is complete. If not, try the next code for your TV brand.

Image: Dish Network 20.1 Remote Control shown alongside a sheet of programming codes and room labels.

Instruções de operação

Funções básicas

• PODER: Pressione o PODER button to turn your Dish receiver and programmed TV on or off.
• VOLUME +/-: Adjusts the volume of your programmed television.
• CANAL +/-: Changes the channel on your Dish receiver.
• MUDO: Mutes or unmutes the sound on your programmed television.
• SELECIONE: Confirma seleções em menus.
• GUIA: Exibe o guia de programação.
• CARDÁPIO: Accesses the main menu of your Dish receiver.

Imagem: Close-up view of the central buttons on the Dish Network 20.1 Remote Control, highlighting navigation and function keys.

Funções avançadas

• DVR: Acessa as funções do seu gravador de vídeo digital.
• PLAY/PAUSE, STOP, RECORD, FWD, BACK, SKIP BACK, SKIP FWD: Control playback of recorded content.
• INFORMAÇÕES: Exibe informações do programa.
• PROCURAR: Initiates content search.
• VIEW LIVE TV: Returns to live television viewindo.
• PIP (imagem em imagem): Controls Picture-in-Picture functionality, if supported by your receiver/TV.
• TROCA: Swaps between two active channels or PIP windows.

Manutenção

Substituição da bateria

Replace batteries when the remote's response becomes sluggish or the indicator lights do not illuminate. Always replace all four AAA batteries simultaneously with new ones. Do not mix old and new batteries, or different types of batteries.

Limpeza

To clean the remote, gently wipe it with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.

Solução de problemas

O controle remoto não está respondendo

• Ensure there is a clear line of sight between the remote and the Dish receiver/TV. Obstructions can block the infrared signal.
• Verifique as pilhas. Substitua-as se estiverem velhas ou descarregadas.
• Verify that the correct mode button (SAT for receiver, TV for television) is selected before pressing a command.
• If controlling a Dish receiver, ensure the receiver is configured for IR mode, especially if it originally came with a UHF remote.

TV Not Programming

• Double-check the TV code entered. Ensure it matches your television brand.
• Try all available codes for your TV brand from the provided list.
• Certifique-se de estar segurando o TV mode button long enough for all four mode buttons to light up before releasing.
• Se o TV button does not flash three times after entering the code, the code was not accepted. Repeat the programming steps carefully.

Especificações

Garantia e Suporte

For warranty information and technical support, please refer to the official Dish Network website or contact Dish Network customer service directly.

Aviso Legal: This product is shipped to continental U.S. only.