د UGAME Y5A آرکیډ کنټرولر
محصول پای ته ورسیدview
The Y5A Arcade Controller is a multi-platform gaming device compatible with PC, Mac, Android, Nintendo Switch, and PS3. It supports both wired and wireless connections, offering flexible and convenient operation for various gaming environments.
Y5A Instruction
- د کور تڼۍ
- ټربو تڼۍ
- Share Button (Screenshot Button)
- Map Button (Select/”-
- Menu Button (Start/”+”)
- د بیا تنظیم تڼۍ
- Connection Mode Button
- Type-C Charging/Data Port
- د بیټرۍ کڅوړه
- 2.4G/WiFi Receiver
نوټ: When switching modes, the arcade controller will automatically power off. Press the Home button to nower on and reconnect to the last used mode.
د کمپیوټر سره وصل کړئ
د بریښنا پيوستون
د Xinput حالت
Connect the arcade controller to a PC or Android device via USB cable. Channel indicators 1 and 4 will light up.
بې سیم پیوستون
Bluetooth – Xinput Mode
- Toggle the switch to “BT” mode.
- With the controller off, hold the Home button for 3 seconds.
- لټون “Xbox Wireless Controller” on PC and connect.
Once connected, the channel indicator will stay solid
12.4G – Xinout Mode
- Insert the receiver into the PC. The white LED will blink while waiting for connection.
- Toggle the switch to the Receiver Icon.
- With the controller off, hold the Home button for 3 seconds. Channels 1-4 will flash rapidly to enter pairing mode.
Once connected, the channel indicator will stay solid.
د بریښنا پيوستون
د بدلولو حالت
Connect the arcade controller to a Mac via USB cable. Channel indicator 1 will light up.
بې سیم پیوستون
Bluetooth – Xinput Mode
- Toggle the switch to “BT” mode.
- With the controller off, hold the Home button for 3 seconds.
- لټون “Xbox Wireless Controller” on PC and connect.
د Android سره وصل کړئ
Connect the arcade controller to a PC or Android device via USB cable. Channel indicators 1 and 4 will light up.
بې سیم پیوستون
Bluetooth – Xinput Mode
- Toggle the switch to “BT” mode.
- With the controller off, hold the Home button for 3 seconds.
- لټون “Xbox Wireless Controller” on PC and connect.
- Once connected, the channel indicator will stay solid.
د Xinput حالت
- Insert the receiver into the device. The white LED will blink while waiting for connection.
- Toggle the switch to the Receiver Icon.
- With the controller off, hold the Home button for 3 seconds.
- Once connected, the channel indicator will stay solid.
د نینټینډو سویچ سره وصل شئ
د بریښنا پيوستون
Connect via USB to the Switch dock’s USB port or use an adapter to connect to the console’s bottom port. Channel indicator 1 will light up.
بې سیم پیوستون
Bluetooth – Switch Mode
- Toggle the switch to “NS” mode.
- With the controller off, hold the Home button for 3 seconds.
- Enter the Switch console interface and select[Controllers] settings
- Choose [Change Grip/Order]
د PS3 سره وصل شئ
Connect to the PS3 console via USB cable, then press the Home button. Channel indicators 2 and 3 will light up.
د فعالیت توضیحات
- بریښنا بنده
- Press and hold the Home button for 5 seconds to turn off the controller.
- Press the Reset button (next to the mode switch) to force shutdown.
- Turbo Function (No Memory Storage)
- Supported Buttons:
- Semi-Auto Turbo: Press and hold any button, then press the Turbo button to enable semi-auto turbo mode. Release the button to stop turbo.
- Auto Turbo: If a button is already in semi-auto turbo mode, press the Turbo button again to enable full-auto turbo mode. The button will continuously activate until pressed again to disable.
- Cancel Turbo: Press the button with turbo enabled while simultaneously pressing the Turbo button to restore it to normal.
- Clear All Turbo Settings: Press the Turbo button and the Map button simultaneously.
- Supported Buttons:
- Arcade Stick Mode Switching (Default: D-Pad Mode)
- د فرم ویئر اپ گریڈ
- Power off the arcade controller.
- Press and hold the Menu button while connecting to a PC via USB.
- Channel indicators 1, 2, 3, and 4 will flash once, indicating upgrade mode.
- Run the firmware update tool to complete the upgrade.
خوندیتوب او ساتنه
- Keep the arcade controller dry and avoid extreme temperatures.
- Use the original USB cable or a certified alternative for charging and connection. Input: 5V/1A
- If the device becomes unresponsive, press the Reset button to reboot.
ملاتړ او خدمت
د مرستې لپاره، اړیکه ونیسئ support@datafrogx.com
د FCC خبرتیا بیان
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- د ترلاسه کونکي انتن بیا ځای پرځای کول یا ځای په ځای کول.
- د تجهیزاتو او رسیدونکي ترمینځ جلا کول زیات کړئ.
- تجهیزات په یوه سرکټ کې له هغه څخه توپیر سره وصل کړئ چې ریسیور ورسره وصل دی.
- د مرستې لپاره د ډیلر یا تجربه لرونکي راډیو / تلویزیون تخنیکین سره مشوره وکړئ. دا وسیله د FCC قواعدو برخه 15 سره مطابقت لري. عملیات د لاندې دوو شرایطو تابع دي:
- دا وسیله ممکن د زیان رسونکي مداخلې لامل نشي، او
- دا وسیله باید هر ډول ترلاسه شوې مداخله ومني، په شمول د هغه مداخلې چې ممکن د ناغوښتل شوي عملیاتو لامل شي. د FCC وړانګو د افشا کولو بیان
وسیله د عمومي RF افشا کولو اړتیاو پوره کولو لپاره ارزول شوې. وسیله پرته له کوم محدودیت څخه د پورټ ایبل افشا کیدو حالت کې کارول کیدی شي.
اسناد / سرچینې
 |
د UGAME Y5A آرکیډ کنټرولر [pdf] د کارونکي لارښود Y5A، Y5A آرکیډ کنټرولر، آرکیډ کنټرولر، کنټرولر |