منځپانګې پټول
1 CASIO Screen Receiver
2 د محصول کارولو لارښوونې
3 FAQ
4 اسناد / سرچینې
4.1 حوالې

CASIO-لوګو

CASIO Screen Receiver

CASIO-Screen-Receiver-PRODUCT

د محصول کارولو لارښوونې

پیل کول

About Screen Receiver

  • Screen Receiver provides the following functions.
  • Display of calculator screen images on a computer connected via a USB cable
  • Real-time display of calculation results
  • Zooming of display contents
  • Capture of screen contents
  • Copy and paste of captured screen images to other applications
  • Storage of captured screen images as image files
  • Printing of captured screen images

د دې لارښود په کارولو سره

  • In this manual, different calculator models are referred to as shown below.
  • Type A Calculator: fx-CGIO Series, fx-CG20 Series, fx-CG50 Series, GRAPH90+ E, fx-9860G111, fx-9750G111, GRAPH35+ E 11
  • Type B Calculator. ClassPad 330 PLUS
  • Type C Calculator: ClassPad II, fx-CG500
  • Type D Calculator: fx-CGIOO, fx-1AU GRAPH, GRAPH MATH*
  • The procedures in this manual assume that you are already familiar with the following standard computer operations.
  • Menu operations using the mouse, including: clicking, double-clicking, dragging, etc.
    • Text input using the keyboard
    • Icon operations, general window, etc.
    • If you are not familiar with these types of refer to the user documentation for your computer.
  • The explanations in this manual cover both Windows and macOS. Most of the screenshots are from Windows 8.1, but operational procedures are virtually identical for both Windows and macOS.
  • Note that the actual appearance of the screen that appears when using this software depends on your computer system setup and on the operating system you are using.
  • Screenshots shown in this I-Jser’s Guide are intended for illustrative purposes only. The actual text and values that appear on display may differ from the examples shown in this IJser’s Guide.
  • This manual explains Screen Receiver operations using a Type A Calculator. Screen Receiver operations are identical when using a Type B, Type C, or Type D Calculator.

د سیسټم اړتیاوې

وینډوز

عملیاتي سیسټمونه:

  • ته مراجعه وکړئ webپه سایټ کې URL لاندې: https://s.casio.jp/c/11440en/
  • کمپیوټر: Computer with one of the Windows operating systems pre-installed (Excluding computers with an upgraded operating system and self-built computers.)
  • د ډیسک ځای: 100MB for installation and uninstall
  • یادونه: Actual requirements and product functionality may vary based on your system configuration and operating system.
  • بل USB port for direct connection. Do not connect via a USB hub. Video adapter and display must support resolution of XGA (1024×768) or higher, 16-bit or higher system color.

macOS

عملیاتي سیسټمونه:

  • ته مراجعه وکړئ webپه سایټ کې URL لاندې: https://s.casio.jp/c/11457en/
  • د ډیسک ځای: 100MB for installation and uninstall
  • یادونه: Actual requirements and product functionality may vary based on your system configuration and operating system.
  • نور: USB port for direct connection. Do not connect via a USB hub. Video adapter and display must support resolution of XGA (1024×768) or higher. For Retina display, use of the Low Resolution mode is recommended.

نوټ

  • For the latest information about system requirements, visit the webپه سایټ کې URL لاندې:  https://world.casio.com/support/os_support/
  • وینډوز په متحده ایالاتو او/یا نورو هیوادونو کې د مایکروسافټ کارپوریشن راجستر شوی سوداګریز نښه یا سوداګریز نښه ده.
  • Mac, macOS, and Retina are registered trademarks or trademarks of Apple Inc. in the United States and/or other countries.
  • اډوب او ریډر یا په متحده ایالاتو او / یا نورو هیوادونو کې د اډوب سیسټمونو شرکت ثبت شوي سوداګریز نښې یا سوداګریز نښې دي.
  • Company and product names used herein are trademarks of their respective owners.
  • Note that trademark TM and registered trademark are not used within the text of this user’s guide.
  1. Installing and Uninstalling Screen Receiver
    This section explains how to install and uninstall Screen Receiver.

To install Screen Receiver

نوټ

  • Do not install Screen Receiver into a folder that is used by other software.
  1. On your computer, double-click the Screen Receiver application EXE file.
  2. Perform operations as instructed by the text that appears on the screen.
  3. The dialog box shown below will appear when installation is complete.CASIO-Screen-Receiver-FIG (2)
  4. د [بشپړ] تڼۍ کلیک وکړئ.

This completes installation.

نوټ

  • Installing the software will put a “Screen Receiver” shortcut icon on your desktop.

To uninstall Screen Receiver

وینډوز

  1. Display the Windows Control Panel.
  2. Click [Programs and Features].
  3. On the list of applications that appears, select “Screen Receiver.
  4. Click the [Uninstall] button.
    • This will display the program maintenance wizard.
  5. د [هو] تڼۍ کلیک وکړئ.
    • This completes the uninstall operation.

macOS

  1. Move Screen Receiver(.app) to the Trash folder.
  2. From the menu, select [Finder] and then [Empty Trash].

To start up the Screen Receiver

  1. Windows: On your computer’s desktop, double-click the “Screen Receiver” icon. macOS: In the “Applications” – “CASIO” folder, double-click “Screen Receiver”.
    • Windows: You could also start up the application by clicking [Start] – [Program] – [CASIO] – [Screen Receiver] – [Screen Receiver].CASIO-Screen-Receiver-FIG (3)

د سکرین ترتیب
The following shows the Screen Receiver screen.

  • When connected to a Type A CalculatorCASIO-Screen-Receiver-FIG (4)
  • When connected to a Type B CalculatorCASIO-Screen-Receiver-FIG (5)
  • When connected to a Type C CalculatorCASIO-Screen-Receiver-FIG (6)
  • When connected to a Type D CalculatorCASIO-Screen-Receiver-FIG (7)

مینو بار

  • This section explains the Screen Receiver menu bar.
  • If a menu command can also be executed by clicking a toolbar button, the applicable toolbar button is also provided.

File مینوCASIO-Screen-Receiver-FIG (8)

  1. یوازې وینډوز
  2. macOS: On the [Screen Receiver] menu, select [Quit Screen Receiver].

د ترمیم مینوCASIO-Screen-Receiver-FIG (9)

Screen Receive MenuCASIO-Screen-Receiver-FIG (10)

View مینوCASIO-Screen-Receiver-FIG (11)

د کړکۍ مینوCASIO-Screen-Receiver-FIG (12)

Tools Menu (Windows only)CASIO-Screen-Receiver-FIG (13)

  1. macOS: This menu item is not available in macOS. To do the same operation, select [Settings…] and then display the Preferences pop-up.

د مرستې مینوCASIO-Screen-Receiver-FIG (14)

  1. The User’s Guide that opens when you select this menu item is an older version. For the latest version of the User’s Guide, visit the webلاندې سایټ.  https://world.casio.com/manual/calc/
  2. macOS: On the [Screen Receiver] menu, select [About Screen Receiver].CASIO-Screen-Receiver-FIG (1)
  1. Help text is displayed here (Windows only).
  2. Folder where captured data is stored
  3. File name extension of captured data files

Using Screen Receiver

Establishing a Connection between the Screen Receiver and a Calculator

مهم!

  • Do not connect the calculator to the computer before starting up Screen Receiver. Start up the Screen Receiver first.
  1. Start up Screen Receiver.
  2. Use a USB cable* to connect the calculator to your computer.
    • This will display the dialog box shown below.
    • Use of a genuine CASIO USB cable is recommended. If your calculator comes with a USB cable, please use that cable.
    • If you plan to use a commercially available USB cable, be sure to use a cable that can transfer data.CASIO-Screen-Receiver-FIG (15)
  3. Type A Calculator (fx-CGIO Series, fx-CG20 Series, fx-CG50 Series, GRAPH90+ E):
    • For Windows 8.1, Windows 10, Windows 11 users: pressCASIO-Screen-Receiver-FIG (16).
    • For Windows XP users: pressCASIO-Screen-Receiver-FIG (17)
    • For macOS users: pressCASIO-Screen-Receiver-FIG (16)
      Type A Calculator (fx-9860G111, fx-9750G111, GRAPH35+ E 11):
    • For Windows 8.1, Windows 10, Windows 11 users: press CASIO-Screen-Receiver-FIG (17).
    • For macOS users: pressCASIO-Screen-Receiver-FIG (17)
      Type B or Type C Calculator:
    • For Windows 8.1, Windows 10, Windows 11 users: tap [Screen Receiver], or press theCASIO-Screen-Receiver-FIG (18)
    • For Windows XP users: tap [Screen Receiver(XP)], or press theCASIO-Screen-Receiver-FIG (19) کلید
    • For macOS users: tap [Screen Receiver] or press the CASIO-Screen-Receiver-FIG (18)کلید
    • Type D Calculator:
    • Select [Screen Receiver].
    • This will display the dialog box shown below.CASIO-Screen-Receiver-FIG (20)
    • USB Connection Precautions
    • A USB connection between the calculator and a computer may be terminated automatically if the computer enters a power save mode, sleep mode, or any other standby state. If this happens, disconnect and then reconnect the USB cable.
  4. Type A Calculator: مطبوعاتيCASIO-Screen-Receiver-FIG (21)
    • Type B or Type C Calculator: Tap [0K].
    • Type D Calculator: Select [0K].
      • This automatically establishes a connection between the Screen Receiver and the calculator, and displays the calculator screen on the Screen Receiver window.
      • Wait until the calculator screen appears on the Screen Receiver window before performing any calculator operation.CASIO-Screen-Receiver-FIG (22)
  5. Perform the operations you want on the calculator.
    • The calculator screen displayed by the Screen Receiver will change in real time as you perform operations on the calculator.
  6. To terminate the connection between the Screen Receiver and the calculator, clickCASIO-Screen-Receiver-FIG (23)
  7. Disconnect the USB cable from the computer and calculator.
    نوټ
    • If the connection between the Screen Receiver and the calculator terminates for some reason, click toCASIO-Screen-Receiver-FIG (24) بیا نښلول

Calculation Operation Precaution

  • The way figures are drawn, and the cursor moves on the Screen Receiver screen, may not exactly match what appears on the calculator screen.
  • The calculator does not support the operations below, while there is a connection between the calculator and the Screen Receiver.
    • File ړنګول
    • Folder create or rename
    • بیک اپ
    • اصلاح کول
    • Reset operations
  • The screen receiver will not display the calculator screen while the calculator is performing a file save operation. The calculator screen will appear after the file save is complete.
  • While in Exam Mode on a Type D calculator, you cannot establish a connection between the Screen Receiver and the calculator. If you enter Exam Mode on the calculator while a connection between the Screen Receiver and the calculator is established, the connection will be lost.

Capturing the Calculator Screen

  1. Perform the required operation on the calculator to display the screen you want to capture.
  2. کلیک وکړئ CASIO-Screen-Receiver-FIG (25) . This displays the captured data.CASIO-Screen-Receiver-FIG (26)
  3. Repeat steps 1 and 2 to capture other screens, if you want.
    نوټ
    • You can put a frame around the captured data by clickingCASIO-Screen-Receiver-FIG (27). Each click toggles between framed and unframed data. For more information, see “4-2 Capture Settings.”

Making a Captured Data Window Active
Clicking a captured data window makes it the active window.CASIO-Screen-Receiver-FIG (28)

نوټ

  • Only one captured data window can be active at any time.
  • To zoom, copy, save, or print the contents of a captured data window, you first must make it the active window.

Copying Captured Data Window Contents to the Clipboard

  1. Make the captured data window that contains the data you want to copy the active window.
  2. کلیک وکړئ CASIO-Screen-Receiver-FIG (45)to copy the captured data to the clipboard.

Saving Captured Data
Make the window that contains the captured data you want to save the active window, and then clickCASIO-Screen-Receiver-FIG (29)

نوټ

  • Saved captured data is automatically assigned a file name of the following format: DispCapXX. xxx.
  • د file format (bmp*, jpg, png) and storage folder are in accordance with the settings described under “4-1 File Save Settings.”
  • یوازې وینډوز
  • You can use the [Save As] command on the [File] menu to save the file under a different name.

اتومات File خوندي کړئ
Attempting to exit Screen Receiver while there is unsaved captured data will cause the dialog box shown below to appear.CASIO-Screen-Receiver-FIG (30)

  1. مشخص کوي file د خوندي شوي لپاره بڼه file. You can select bmp*, jpg, or png. * Windows only
  2. که چیرې دمخه شتون ولري a file with the same name that you specify, this option specifies whether or not the older version should be overwritten with the new one.

Resizing a Screen Image

To resize the calculator screen
Right-click the calculator screen. Click [Zoom] on the shortcut menu that appears and then select a zoom factor.CASIO-Screen-Receiver-FIG (31)

To resize the calculator screen when capturing it
On the toolbar, click the down arrow button of the zoom box. On the menu that appears, select a zoom factor.CASIO-Screen-Receiver-FIG (32)

To resize captured data
Make the window that contains the captured data you want to resize the active window, and then click CASIO-Screen-Receiver-FIG (33)oRCASIO-Screen-Receiver-FIG (34) you can select one of three sizes.CASIO-Screen-Receiver-FIG (35)

You can also resize by selecting a zoom factor with the [Zoom] command on the [View] غورنۍ.

Using a Floating Calculator Screen (Windows only)
You can display the calculator screen in its own window that is separate from the Screen Receiver window.

To make the calculator screen a floating screen

  1. Double-click the calculator screen.
  2. Drag the calculator screen to the location you want, either inside or outside of the Screen Receiver window.CASIO-Screen-Receiver-FIG (36)

To return a floating calculator screen to the Screen Receiver window

  • Double-click the floating calculator screen.
  • Drag the calculator screen back to the left side of the Screen Receiver window.

مهم!

  • You can return a floating calculator screen only to the left side of the Screen Receiver window.
  • Dragging the top, bottom, or right side of the main window will not work.

چاپول
You can print the contents of a captured data window if you want.

  1. Make the captured data window that contains the data you want to print the active window.
  2. کلیک وکړئCASIO-Screen-Receiver-FIG (37) . This will display the Print dialog box.CASIO-Screen-Receiver-FIG (38)
  3. Click [0K] to start printing.
    مهم!
    • Only the contents of the currently active captured data window can be printed. You cannot print the contents of multiple captured data windows with a single print operation.
    • Images are printed in accordance with the width setting of the paper size selected on the Print dialog box.

د چاپ دمخهview (یوازې وینډوز)
کلیک وکړئ CASIO-Screen-Receiver-FIG (34)display the print preview کړکۍCASIO-Screen-Receiver-FIG (39)

  1. Displays the Print dialog box.
  2. Enlarges the preview انځور
  3. Reduces the size of the preview انځور
  4. Closes the print preview window image.

Print Setup Dialog Box
Selecting [Print Setup] on the [File] menu displays the Print Setup dialog box.CASIO-Screen-Receiver-FIG (40)

د شارټ کټ مینو
On the calculator screen or captured data window, right-clicking with your mouse (Windows) or performing a control+click (macOS) will cause the shortcut menu shown below to appear.CASIO-Screen-Receiver-FIG (41)

Tool Options Dialog Box

File ترتیبات خوندي کړئCASIO-Screen-Receiver-FIG (42)

  1. File name extension of captured data files: Bmp: Windows only
  2. Storage folder

د نیولو ترتیباتCASIO-Screen-Receiver-FIG (43)

  1. Specifies unframed captured screen images Specifies framed captured screen images, and frame thickness.
  2. Captured data exampleCASIO-Screen-Receiver-FIG (44)

د تېروتنې پیغام جدول

پیغام تفصیل اړین اقدام
A problem occurred while writing file <file نوم>.

The disk being written to may be damaged or may not exist. Check the disk and try again.

 A problem occurred while writing to a disk. Check the disk for data corruption and confirm that the disk exists. Then try again.
A problem occurred while launching the manual (***.pdf) viewer.

ډاونلوډ کړئ viewer from the site below and reinstall it. http://get.adobe.com/reader/ otherversions/

 A problem occurred during manual viewer startup. Download and install a new viewله دې څخه http://get.adobe.com/reader/ otherversions/.
The path and/or filename exceeds the maximum length allowed by your وینډوز* operating system. The number of letters in the path or file name you specified exceeds the allowable limit. Shorten the specified path or file نوم
A connection could not be established.

Either the calculator is not connected, or the connected calculator is not in the Screen Receiver Mode.

Correct the problem and try again.

For details, select the following on the menu bar: Help – Manual, or refer to the Screen Receiver user’s guide.

 You started a data communication operation while the USB cable was not connected. Check for the proper connection of the calculator to the computer. Then try again.

See “3. Using Screen Receiver” for details.
A problem occurred during communication.

Disconnect the USB cable, check the setup of the calculator, and try again.

For details, select the following on the menu bar: Help – Manual, or refer to the Screen Receiver user’s guide.

 A problem occurred during data communication. Disconnect the USB cable and check the setup of the calculation. Then try again. See “3. Using Screen Receiver” for details.
پیغام تفصیل اړین اقدام
The image could not be sent from the calculator.

(1)       Try pressing a key on the calculator.

(2)        Check to make sure that the calculator is in the Screen Receiver Mode.

If the screen is not sent after you perform the above steps, disconnect the USB cable and check the calculator setup. Next, reconnect and try again.

For details, select the following on the menu bar: Help – Manual, or refer to the Screen Receiver user’s guide.

 The calculator screen image cannot be sent for some reason. Follow the steps that are shown on the display and try again.

See “3. Using Screen Receiver” for details.
The connection has been broken for some reason and is being restored.

If data communication does not resume after some time, perform the operation described below.

Try pressing a key on the calculator. If the screen is not sent after you perform the above steps, disconnect the USB cable and check the calculator setup. Next, reconnect and try again.

For details, select the following on the menu bar: Help – Manual, or refer to the Screen Receiver user’s guide.

  

 

 

 

 

 

 

 

-

 Follow the steps that are shown on the display and try again.
The application is already running.

Another user may already be using the application.

 Another user is running Screen Receiver. Wait until the other user shuts down Screen Receiver.

د CASIO نړیوال تعلیم Webسایټ
https://edu.casio.com

Manuals are available in multiple languages at
https://world.casio.com/manual/calc/

  • SA2512-J
  • خپور شوی: 12/2025
  • 2014 د کاسیو کمپیوټر شرکت ، ل.

د CASIO کمپیوټر شرکت، LTD.

  • 6-2, Hon-machi I-chome
  • شبویا-کو ، ټوکیو 151-8543 ، جاپان

FAQ

پوښتنه: زه په مختلفو ژبو کې د کارن لارښود چیرته موندلی شم؟

A: The user manual is available in multiple languages at https://world.casio.com/manual/calc/

Q: What are the compatible calculator models for the Screen Receiver?

A: The compatible calculator models include the fx-CG10 Series, fx-CG20 Series, fx-CG50 Series, GRAPH90+, fx-9860GIII, fx-9750GIII, GRAPH35+ E II, ClassPad 330 PLUS, ClassPad II, fx-CG500, fx-CG100/fx-1AU GRAPH/GRAPH MATH+

اسناد / سرچینې

CASIO Screen Receiver [pdf] د کارونکي لارښود
Screen Receiver, Screen Receiver, Screen, Receiver

حوالې

یو نظر پریږدئ

ستاسو بریښنالیک پته به خپره نشي. اړین ساحې په نښه شوي *