Cudy AP1200 Outdoor

Cudy AC1200 Outdoor Wireless Access Point (AP1200 Outdoor) User Manual

ماډل: AP1200 بهر

1. محصول ختم شوview

The Cudy AC1200 Outdoor Wireless Access Point (AP1200 Outdoor) is designed to provide reliable and high-speed Wi-Fi connectivity in outdoor environments. It supports the latest 802.11ac Wave 2 technology, offering dual-band Wi-Fi speeds up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz. Key features include MU-MIMO, Beamforming, IP65 waterproof rating, 4KV lightning protection, and flexible Power over Ethernet (PoE) options.

Cudy AC1200 Gigabit Outdoor Wireless Access Point with key features listed

Figure 1: Cudy AP1200 Outdoor Wireless Access Point Overview

2. د بسته محتويات

ډاډ ترلاسه کړئ چې ستاسو په کڅوړه کې لاندې ټول لیست شوي توکي شامل دي:

  • AP1200 Outdoor Wireless Access Point
  • د بریښنا اډاپټر
  • Detachable Antennas (2 units)
  • د بریښنا تار
  • د غرونو کڅوړه
  • ایترنیټ کیبل
  • د نصبولو لارښود (دا لارښود)

3. هارډویر ختمview

3.1 فزیکي بڼه

مخکی view of the Cudy AP1200 Outdoor Wireless Access Point

Figure 2: Cudy AP1200 Outdoor Access Point

3.2 د LED شاخصونه

دا وسیله د خپل حالت ښودلو لپاره څو LED شاخصونه لري:

  • د بریښنا LED: د ځواک حالت په ګوته کوي.
  • LAN LED: Indicates Ethernet connection status.
  • ۲.۴GHz وای فای LED: Indicates 2.4GHz wireless activity.
  • ۲.۴GHz وای فای LED: Indicates 5GHz wireless activity.

۲.۲.۱ بندرونه او تڼۍ

The device includes the following ports and buttons:

  • RJ45 Port (PoE-IN): Used for both data and power input via Power over Ethernet.
  • د بیا تنظیم تڼۍ: د فابریکې ډیفالټ ترتیباتو بیرته راګرځولو لپاره کارول کیږي.
  • د انتن نښلونکي: Two RP-SMA connectors for detachable antennas.
Close-up of the RJ45 PoE-IN port on the Cudy AP1200 Outdoor

Figure 3: RJ45 Port with PoE-IN

4. ترتیب او نصب کول

۳.۲ د انتنونو نښلول

Carefully screw the two detachable 5dBi antennas onto the RP-SMA connectors on the device. Ensure they are securely fastened but do not overtighten.

Cudy AP1200 Outdoor with two detachable antennas attached

Figure 4: Antennas Attached to AP1200 Outdoor

۳.۲ د ایترنیټ (PoE) اتصال باندې د بریښنا اتصال

The AP1200 Outdoor supports 802.3at/af PoE or 24~50V passive power supply. Use the included PoE adapter to power the device and connect it to your network.

  1. Connect one end of an Ethernet cable to the LAN port of your router or network switch.
  2. Connect the other end of this Ethernet cable to the 'LAN' port on the PoE adapter.
  3. Connect one end of the included Ethernet cable to the 'PoE' port on the PoE adapter.
  4. Open the protective cover on the AP1200 Outdoor and connect the other end of the Ethernet cable from the PoE adapter to the RJ45 (PoE-IN) port on the AP.
  5. Plug the PoE adapter into a power outlet. The device will power on, and the Power LED will illuminate.

4.3 د نصبولو اختیارونه

The AP1200 Outdoor can be mounted on a pole or a wall using the provided mounting kit. Choose a location that offers optimal Wi-Fi coverage and is protected from direct impact.

  • د قطب نصبول: Use the straps and brackets to secure the device to a pole.
  • دیوال نصبول: Use screws and anchors to attach the device to a wall.
Diagram showing both wall-mounting and pole-mounting options for the Cudy AP1200 Outdoor

Figure 5: Mounting Options (Wall and Pole)

5. عملیاتي طریقې

The Cudy AP1200 Outdoor supports multiple operating modes to suit various network requirements:

  • د لاسرسي نقطې (AP) حالت: Connects to a wired network and transforms it into a wireless network, allowing multiple Wi-Fi devices to connect.
  • د توزیع کولو حالت: د موجوده بېسیم شبکې پوښښ پراخوي.
  • راوټر حالت: د لومړني روټر په توګه کار کوي، وصل شوي وسیلو ته انټرنیټ لاسرسی چمتو کوي.
  • د WISP حالت: Connects wirelessly to an Internet Service Provider (ISP) network and shares the connection with local devices.
  • Mesh Router Mode: Creates a seamless mesh Wi-Fi network with other compatible devices.
ډیاګرام چې د لاسرسي نقطې حالت تنظیم ښیې

د رسي ټکی اکر

Diagram illustrating Router Mode setup

د راوتلو اکر

Diagram illustrating Repeater Mode setup

د تکرار اکر

د WISP حالت تنظیم کولو انځورونکی ډیاګرام

د WISP حالت

6. ترتیب کول

To configure the AP1200 Outdoor, connect a computer to the device via Ethernet or Wi-Fi. Access the web- د مدیریت پر بنسټ د کارولو انٹرفیس a web براوزر

  1. Ensure your computer is connected to the AP1200 Outdoor (either directly via Ethernet or to its default Wi-Fi network).
  2. خلاص a web براوزر او ډیفالټ IP پته دننه کړئ (معمولا 192.168.10.1 or refer to the Quick Installation Guide) in the address bar.
  3. د کارونکي نوم او پټنوم اصلي ډول دننه کړئ (معمولا admin د دواړو لپاره).
  4. Follow the on-screen wizard to set up your desired operating mode, Wi-Fi name (SSID), and password.
  5. Save your settings and restart the device if prompted.

7. ساتنه

7.1 د فرم ویئر تازه معلومات

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Visit the Cudy official website for the latest firmware for your AP1200 Outdoor model.

7.2 پاکول

As an outdoor device with an IP65 rating, the AP1200 Outdoor is protected against dust and water. However, periodic cleaning can help maintain its appearance and prevent excessive buildup. Use a soft, damp د بهرنۍ برخې د پاکولو لپاره ټوکر. سخت کیمیاوي مواد یا د کثافاتو پاکوونکي مه کاروئ.

7.3 د چاپیریال په اړه نظرونه

The device is designed to operate in a wide range of outdoor temperatures (-40°C to 65°C). Ensure proper ventilation and avoid placing it in direct sunlight for prolonged periods if possible, to maximize lifespan.

Illustrations of the Cudy AP1200 Outdoor's weatherproof features including rain-proof, extreme temperature resistance, lightning/surge protection, and dust-proof design.

Figure 6: Weather-Proof Design

8. ستونزه حل کول

If you encounter issues with your AP1200 Outdoor, refer to the following common troubleshooting steps:

  • ځواک نشته: Ensure the PoE adapter is correctly plugged into a power outlet and the Ethernet cable is securely connected to the AP's PoE-IN port. Check the power LED.
  • انټرنیټ ته لاسرسی نشته: Verify that your main router has internet access. Check the Ethernet cable connections between the router, PoE adapter, and AP. Ensure the AP is configured in the correct operating mode.
  • د وای فای کمزوری سیګنال: Adjust the antenna orientation. Relocate the AP to a more central position or higher elevation. Check for physical obstructions.
  • لاسرسی نشم کولی Web مدیریت پاڼه: Ensure your device is connected to the AP's network. Verify the IP address entered in the browser is correct. Try clearing your browser's cache or using a different browser.
  • د فابریکې رییس: If problems persist, you may need to perform a factory reset. With the device powered on, use a paperclip to press and hold the Reset button for approximately 5-10 seconds until the LEDs flash. The device will restart with factory default settings.

9. مشخصات

فیچرتفصیل
د ماډل نومAP1200 بهر
د محصول ابعاد9.45 x 3.94 x 2.11 انچه
د توکي وزن14.6 اونس
بيسيم ستندرد802.11ac څپې 2
د فریکونسی بانډ ټولګیدوه ګونی بانډ (2.4 GHz او 5 GHz)
د وای فای سرعت (۲.۴ GHz)تر 867 Mbps پورې
د وای فای سرعت (۲.۴ GHz)تر 300 Mbps پورې
انتن2 external 5dBi detachable antennas
بندرونه1x RJ45 (PoE-IN)
د بریښنا رسول802.3at/af PoE or 24~50V Passive PoE (adapter included)
د هوا ساتنهIP65 rated waterproof housing, 4KV lightning protection
د عملیاتي حرارت درجهله 40 درجو څخه تر 65 درجو پورې
مطابقت لرونکې وسیلېشخصي کمپیوټر، امنیتي کیمره، سمارټ تلویزیون، سمارټ فون، ټابلیټ

10. د تضمین معلومات

Cudy products are backed by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Cudy webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.

11. تخنیکي ملاتړ

If you require further assistance or have questions not covered in this manual, please contact Cudy Technical Support. You can find contact information, FAQs, and additional resources on the official Cudy webسایټ:

  • Webسایټ: www.cudy.com
  • بریښنالیک: ته مراجعه وکړئ webد ملاتړ بریښنالیک پتې لپاره سایټ.

اړوند اسناد - AP1200 بهر

مخکېview د کوډي آر ای ۱۲۰۰ اې سي ۱۲۰۰ ډبل بینډ رینج ایکسینډر - د وای فای پوښښ ښه کړئ
د Cudy RE 1200 کشف کړئ، د AC1200 دوه ګونی بانډ رینج ایکسینډر. دا ډیټاشیټ د هغې ځانګړتیاوې، مشخصات، او د وای فای ایکسینډر یا لاسرسي نقطې په توګه دوه ګونی فعالیت په ګوته کوي ترڅو د مړو زونونو له منځه یوسي او د شبکې فعالیت ښه کړي.
مخکېview د کوډي RE1200 بهرنۍ چټک نصبولو لارښود: تنظیم او جوړه کول
د خپل Cudy RE1200 بیروني وای فای توسیع کونکي یا لاسرسي نقطې نصبولو، بریښنا ورکولو، جوړه کولو او تنظیم کولو لپاره ګام په ګام لارښود. د تنظیم کولو میتودونه، د LED حالت شاخصونه، او د نصبولو لارښوونې پکې شاملې دي.
مخکېview د کوډي AP1200 چټک نصبولو لارښود
د Cudy AP1200 د لاسرسي نقطو نصب او تنظیم کولو لپاره یوه لنډه لارښود، چې د بریښنا رسولو اختیارونه، د سافټویر ترتیب کولو میتودونه (یوځای او کنټرولر حالت)، او د اطاعت معلومات پوښي.
مخکېview د کوډي لاسرسي نقطې د چټک نصبولو لارښود
This guide provides instructions for setting up and configuring Cudy Access Points (AP1200, AP3000). It covers powering the device via DC adapter, PoE adapter, or PoE switch, and configuring the AP with or without an AP controller. The guide also includes LED status indicators and basic network setup information.
مخکېview د کوډي AP3000 بهرنۍ چټک نصبولو لارښود
Step-by-step instructions for installing and configuring the Cudy AP3000 Outdoor Access Point, covering package contents, antenna setup, power connection options (PoE adapter or switch), software configuration methods, LED status checks, and mounting.
مخکېview د کوډي AP3000 چټک نصبولو لارښود
This guide provides quick installation instructions for the Cudy AP3000 Access Point, covering power options and configuration methods.