د سنګلډ پاور SPH10K48SP-P 10000W 48V سولر انورټر لارښوونې لارښود

1. پیژندنه

This manual provides essential information for the safe and efficient operation of your SUNGOLDPOWER SPH10K48SP-P 10000W 48V Solar Inverter. Please read all instructions and warnings carefully before installation and use. Retain this manual for future reference.

د خوندیتوب احتیاطونه:

• Ensure all electrical connections are made by qualified personnel.
• د هر ډول ساتنې یا خدمت ترسره کولو دمخه تل بریښنا قطع کړئ.
• The inverter is heavy; use proper lifting techniques or assistance during installation.
• Install in a well-ventilated area to prevent overheating.

2. د بسته محتويات

ډاډ ترلاسه کړئ چې لاندې ټول توکي ستاسو په بسته کې شامل دي:

• SUNGOLDPOWER SPH10K48SP-P 10000W 48V Solar Inverter
• د وای فای موډول
• WiFi monitoring components
• د کارن لارښود
• د تضمین کارت
• Parallel COM cable
• د مخابراتو کیبل
• Cable lugs & Screws

3. محصول ختم شوview

The SUNGOLDPOWER SPH10K48SP-P is an all-in-one solar charge inverter designed for robust off-grid and hybrid solar systems. It integrates a 10000W pure sine wave inverter, two MPPT solar controllers, and a 200A battery charger, offering flexible AC input/output options (120V/240V settable).

کلیدي ځانګړتیاوې:

• ټول په یوه کې ډیزاین: Combines inverter, MPPT solar controllers, and battery charger.
• د لوړ بریښنا تولید: 10000W rated power, 20000W peak power.
• Dual MPPT Solar Controllers: Max 200A battery charging, 500VDC open circuit voltage.
• Flexible AC Output: Settable 120V/240V split phase or 120V single phase.
• د خالص ساین څپې محصول: Ensures compatibility with sensitive electronics.
• د وائی فای ماډل: Allows remote monitoring and parameter adjustment via mobile app.
• د BMS مخابرات: Supports various battery types including Lithium with CAN, USB, and RS485.
• ډیری عملیاتي طریقې: Four charging and four output modes for diverse energy management.
• Time-Slot Function: Optimizes charging/discharging based on tariff rates.
• UL1741 تصدیق شوی: Ensures safety and reliability.

4. ترتیب کول

4.1 فزیکي نصب کول

The inverter should be mounted securely in a location that is dry, well-ventilated, and protected from direct sunlight and extreme temperatures. Due to its weight (54 lbs), ensure the mounting surface can support the load. Consider accessibility for future adjustments and maintenance.

4.2 بریښنایی پیوستون

All electrical wiring must comply with local and national electrical codes. Use appropriate wire gauges for all connections to ensure safety and optimal performance.

4.2.1 د بیټرۍ پیوستون

Connect the battery cables to the inverter's battery terminals. Ensure correct polarity: positive (+) to positive and negative (-) to negative. Tighten all connections securely to prevent loose contacts and potential hazards.

4.2.2 PV Input Connections

Connect your solar PV array to the designated PV input terminals on the inverter. Observe correct polarity and ensure the open circuit voltage of the PV array does not exceed 500VDC.

4.2.3 AC Input/Output Connections

Connect the AC input from your utility grid or generator, and the AC output to your loads. The inverter supports both 120V/240V split-phase and 120V single-phase configurations. Refer to the wiring diagram for specific connections.

۴.۲ لومړنی پاور اپ او ترتیب

After all physical and electrical connections are made, proceed with the initial power-up. The inverter's LCD display allows for configuration of various settings, including battery type, charging modes, and output priorities.

Installation and Wiring Overview

Video 4.1: This video demonstrates the unboxing and initial wiring process for the SUNGOLDPOWER inverter, including connecting battery wires and grounding. It highlights the importance of secure connections and proper placement.

Battery and Inverter Communication Setup

Video 4.2: This video provides a detailed guide on connecting the battery pack to the inverter and configuring communication settings. It covers positive and negative terminal connections, RS485/CAN communication, and initial startup procedures, including setting DIP switches and verifying voltage.

5. عملیاتي طریقې

The SPH10K48SP-P inverter offers versatile operating modes to optimize energy usage based on your specific needs:

5.1 د چارج کولو طریقې:

• هایبرډ چارج کول: Utilizes both solar and utility power for battery charging.
• Utility Priority Charging: Prioritizes utility power for charging, with solar as a supplement.
• Solar Priority Charging: Prioritizes solar power for charging, with utility as a backup.
• Only Solar Charging: Charges batteries exclusively from solar power.

5.2 Output Modes:

• د کارونې لومړیتوب: Loads are primarily powered by the utility grid.
• Solar and Utility Hybrid: Dynamically uses solar and utility to power loads.
• Solar Priority: Loads are primarily powered by solar, then batteries, then utility.
• Inverter Priority: Loads are primarily powered by the inverter (from batteries/solar), then utility.

6. Time-Slot Charging/Discharging Function

The inverter features a time-slot function, allowing users to configure specific charging and discharging periods. This is particularly useful for optimizing energy usage based on local peak and off-peak electricity tariffs, maximizing savings and efficient use of PV energy.

• Time-slot Utility Charging/Carrying: Set up to three definable periods for utility charging. If PV energy is unavailable or insufficient, utility energy will be used as a supplement.
• Time-slot Battery Discharging: Set up to three definable periods for battery discharging. During these periods, the inverter prioritizes battery power for loads, switching to mains power if battery power is insufficient.

7. د بیټرۍ مطابقت

The SPH10K48SP-P inverter is compatible with a wide range of 48V battery types, including:

• AGM/Sealed
• جیل
• سیلاب راغی
• لیتیم (LiFePO4)
• User-defined (for custom battery parameters)

It also supports battery-free operation. For lithium batteries, the mains power and photovoltaics can activate a dormant battery. The inverter supports CAN, USB, and RS485 communication with SUNGOLDPOWER batteries for enhanced management.

8. Parallel Function

For increased power output or to create a three-phase system, the SPH10K48SP-P inverter supports parallel connection of up to 6 units. This allows for scalable power solutions to meet diverse energy demands.

9. Communication & Monitoring

The integrated WiFi module allows users to monitor the inverter's operating status and parameters remotely via a mobile application. BMS communication (CAN, USB, RS485) ensures seamless integration and optimized performance with compatible battery systems.

10. ساتنه

Regular maintenance ensures the longevity and optimal performance of your inverter. Perform the following checks periodically:

• بصری معاینه: Check for any visible damage, loose connections, or signs of overheating.
• پاکول: Keep the inverter's ventilation openings clear of dust and debris to ensure proper airflow. Use a dry cloth for cleaning.
• د پیوستون چکونه: Periodically verify that all electrical connections (battery, PV, AC) are tight and secure.
• چاپیریال: ډاډ ترلاسه کړئ چې د نصب کولو چاپیریال د ټاکل شوي تودوخې او رطوبت حدودو کې پاتې کیږي.

11. ستونزه حل کول

If the inverter displays an error code or exhibits unusual behavior, consult the user manual for specific troubleshooting steps. Common issues and general solutions include:

• ځواک نشته: Check all circuit breakers, battery connections, and input power sources.
• د ټیټ تولید بریښنا: Verify PV array performance, battery state of charge, and load requirements.
• د اوورلوډ خبرداری: Reduce connected loads. Ensure total load does not exceed the inverter's rated capacity.
• د اړیکو تېروتنه: Check communication cables and settings for BMS or WiFi modules.

For persistent issues, contact SUNGOLDPOWER customer support.

12. مشخصات

Detailed technical specifications for the SUNGOLDPOWER SPH10K48SP-P 10000W 48V Solar Inverter:

13. تضمین او ملاتړ

SUNGOLDPOWER products are backed by a manufacturer's warranty. Please refer to the included Warranty Card for detailed terms and conditions. For technical assistance, troubleshooting, or warranty claims, please contact SUNGOLDPOWER customer support through their official channels.