پیژندنه
This manual provides essential instructions for the safe installation, operation, and maintenance of your VEVOR Dual Speed 1.5HP Above Ground Pool Pump, Model HAP1100A 2/4. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
The VEVOR Dual Speed Above Ground Pool Pump is designed for efficient water circulation.
د خوندیتوب معلومات
تل د اور، بریښنا شاک، او خلکو ته د ټپي کیدو خطر کمولو لپاره د خوندیتوب اساسي احتیاطي تدابیر تعقیب کړئ، په شمول د لاندې:
- بریښنایی خوندیتوب: Ensure the pump is connected to a properly grounded outlet. Do not operate the pump if the power cord or plug is damaged. Avoid using extension cords. All electrical connections should be performed by a qualified electrician and comply with local codes.
- Water and Chemical Safety: Do not operate the pump when people are in the pool. Always disconnect power before servicing. Avoid contact with moving parts. The pump is designed for use with chlorinated water; however, ensure proper chemical balance to prevent corrosion.
- ځای په ځای کول: Install the pump on a solid, level surface, protected from direct sunlight and excessive moisture. Ensure adequate ventilation around the motor.
- دحرارت درجه: Do not exceed the maximum water temperature of 122°F (50°C).
محصول پای ته ورسیدview
The VEVOR Dual Speed Pool Pump features a robust design for effective water filtration and circulation in above-ground pools, hot tubs, and spas. Key components include:
- ۱.۵ هارس پاور پریمیم مسو موټور: Provides efficient and stable operation with built-in thermal protection.
- Corrosion-Resistant PP Shell: Ensures durability and resistance to chlorinated water.
- د دوه ګوني سرعت اختیارونه: High speed (110 GPM, 54 ft lift) for rapid circulation and low speed (52 GPM, 14 ft lift) for energy-efficient maintenance.
- Extra-Large Strainer Basket: Detachable and transparent lid for easy monitoring and cleaning of debris.
- ځمکني ترمینل: For enhanced electrical safety.
Key components of the VEVOR Dual Speed Pool Pump.
The 1.5 HP dual-speed motor provides efficient performance.
مشخصات
| فیچر | مشخصات |
|---|---|
| د ماډل شمیره | HAP1100A 2/4 |
| والیtage | 110V-120V، 60 Hz |
| ځواک | 1.5 HP (High Speed) / 0.35 HP (Low Speed) |
| د څرخولو سرعت | 3450 RPM |
| اعظمي سر پورته کول | 54 ft (High Speed) / 14 ft (Low Speed) |
| Max. د اوبو جریان | 110 GPM (High Speed) / 52 GPM (Low Speed) |
| مکس د اوبو د حرارت درجه | 122°F (50°C) |
| مواد | پولی پروپیلین (PP) |
| د محصول ابعاد | 22.83 x 7.09 x 10.24 انچه (580 x 180 x 260 mm) |
| د توکي وزن | ۱۱.۵۷ پونډه (۵.۲۵ کیلو ګرامه) |
| د تار اوږدوالی | 35.83 انچه (0.91 متر) |
| Compatible Sand Filter Size | 19-22 انچه |
| Max. Pool Gallons | 34,000 ګیلن |
Detailed specifications and dimensions of the pump.
تنظیم او نصب کول
Proper installation is crucial for the pump's performance and safety. If you are unsure about any steps, consult a qualified professional.
۱. د ځای انتخاب
- Choose a location that is level, dry, and well-ventilated.
- Ensure the pump is easily accessible for maintenance and servicing.
- Position the pump as close to the pool as possible to minimize friction loss in plumbing.
- Protect the pump from direct weather exposure.
2. د نلدوانۍ نښلول
The pump is compatible with 1.5-inch and 2.0-inch NPT internal thread interfaces. Use appropriate fittings and sealants to ensure watertight connections.
- Connect the suction line (from the pool skimmer/main drain) to the pump's inlet.
- Connect the discharge line (to the pool return jets) to the pump's outlet.
- Ensure all connections are tight to prevent air leaks, which can affect priming and pump efficiency.
The pump supports both 1.5-inch and 2.0-inch NPT connections.
3. بریښنایی پیوستون
- ډاډ ترلاسه کړئ چې د بریښنا رسولو د پمپ حجم سره سمون لريtage requirements (110V-120V, 60Hz).
- Connect the pump to a dedicated, grounded electrical circuit protected by a Ground Fault Circuit Interrupter (GFCI).
- Utilize the grounding terminal on the pump to connect a grounding wire, as per local electrical codes, for additional safety.
- د بریښنا تار یا پلګ مه بدلوئ.
عملیاتي لارښوونې
۱. د پمپ پریمینګ کول
Before starting the pump for the first time, or after cleaning the strainer basket, it is essential to prime the pump:
- Ensure all valves in the suction and discharge lines are open.
- Remove the transparent lid of the strainer basket.
- Fill the strainer basket with water until it reaches the suction pipe level.
- پوښ بدل کړئ، ډاډ ترلاسه کړئ چې دا په خوندي ډول ټینګ شوی ترڅو د هوا لیکیدو مخه ونیسي.
- Turn on the pump. The pump should begin to draw water and expel air from the discharge line. If the pump does not prime within 5 minutes, turn it off, re-check all connections for air leaks, and repeat the priming process.
2. Dual Speed Operation
This pump offers two speed settings:
- لوړ سرعت: Provides maximum flow (110 GPM) and lift (54 ft) for initial cleaning, vacuuming, or when rapid water circulation is needed.
- ټیټ سرعت: Offers reduced flow (52 GPM) and lift (14 ft) for continuous, energy-efficient filtration and daily maintenance. This setting is ideal for maintaining water clarity with lower power consumption.
Refer to the pump's control panel or switch for selecting between high and low speeds.
The pump offers high and low speed settings for varied circulation needs.
ساتنه
منظم ساتنه د غوره فعالیت ډاډ ورکوي او ستاسو د پمپ ژوند اوږدوي.
1. Cleaning the Strainer Basket
The strainer basket collects debris and should be checked and cleaned regularly, especially when you notice reduced water flow.
- پمپ بند کړئ او بریښنا پرې کړئ.
- Close any necessary valves to prevent water from flowing back from the pool.
- Unscrew the transparent lid of the strainer basket.
- ټوکرۍ لرې کړئ او راټول شوي ټول کثافات خالي کړئ.
- ټوکرۍ په اوبو سره په ښه توګه ومینځئ.
- Inspect the O-ring on the lid for cracks or wear; replace if necessary. Lubricate the O-ring with a silicone-based lubricant.
- Place the clean basket back into the pump housing.
- Securely replace the lid, ensuring a tight seal.
- Open valves and re-prime the pump as described in the Operating Instructions.
Regularly clean the strainer basket to remove debris.
۶.۳. د ژمي موسم
If you live in an area with freezing temperatures, proper winterization is essential to prevent damage to the pump.
- پمپ بند کړئ او بریښنا پرې کړئ.
- د پمپ څخه ټولې اوبه د اوبو ایستلو پلګ په لرې کولو سره وباسئ.
- Disconnect plumbing lines.
- پمپ په وچ او یخ وهلو پاک ځای کې وساتئ.
د ستونزو حل کول
دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو یې د خپل حوض پمپ سره مخ کیدی شئ.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| پمپ پیل نه کوي | No power; tripped breaker/GFCI; motor overload. | Check power supply, reset breaker/GFCI. Allow motor to cool if overloaded. |
| پمپ چلېږي خو پرائم نه کوي یا کم جریان لري | Strainer basket clogged; air leak in suction line; low water level in pool; closed valves; impeller clogged. | Clean strainer basket. Check all plumbing connections for air leaks. Ensure adequate pool water level. Open all valves. Inspect impeller for debris (disconnect power first). Re-prime the pump. |
| پمپ ډیر شور دی | Air leak in suction; cavitation (lack of water); motor bearing wear; pump not securely mounted. | Check for air leaks and ensure pump is primed. Verify adequate water supply to the pump. Ensure pump is mounted on a stable surface. If motor bearings are worn, professional service may be required. |
| اوبه له پمپ څخه وځي | Loose plumbing connections; worn O-rings/seals; cracked housing. | Tighten connections. Inspect and replace O-rings/seals. If housing is cracked, pump may need replacement. |
| Low speed setting not working | Internal wiring issue; faulty speed switch. | Verify the speed switch is correctly engaged. If the issue persists, contact VEVOR customer support or a qualified technician. |
تضمین او ملاتړ
For warranty information, technical support, or service inquiries regarding your VEVOR Dual Speed 1.5HP Above Ground Pool Pump (Model HAP1100A 2/4), please contact VEVOR customer service directly or refer to the warranty documentation included with your purchase. You can typically find contact information on the VEVOR official webسایټ یا ستاسو د پرچون پلورونکي له لارې.
When contacting support, please have your model number (HAP1100A 2/4) and purchase date available.
