BAFANG SW102/T eBike Display User Manual

1. Introduction and Compatibility

This manual provides essential information for the installation, operation, and maintenance of your BAFANG SW102/T eBike Display. Please read it thoroughly before use to ensure proper function and safety.

1.1 مطابقت

The BAFANG SW102/T eBike Display is designed for use with Bafang BBS01B, BBS02B, and BBS-HD mid-drive motors. It utilizes the UART protocol with a 5-pin female round connector. This display is not compatible with other motor types, including Bafang hub motors or other Bafang mid-drive motors that use a CAN protocol (5-pin male triangular connector).

انځور 1.1: Compatibility chart for BAFANG SW102/T eBike Display. Ensure your motor uses the UART protocol with a 5-pin female round connector.

2. کلیدي ځانګړتیاوې

• د HD LCD نندارې: د موټر چلولو پرمهال روښانه او د لوستلو لپاره اسانه معلومات چمتو کوي.
• د تړون اندازه: Designed for minimal handlebar footprint.
• IPX5 پنروک درجه: Ensures reliable operation in various weather conditions, from light sprinkles to moderate rain.
• Adjustable Pedal Assist Levels: Supports 0-5 pedal assist levels.
• اتوماتیک شاته رڼا: Adjusts display brightness based on ambient light.
• Metric/Imperial Switch: Allows selection between kilometers and miles.
• Walking Assistance Mode: Provides low-speed assistance for walking alongside the eBike.
• Adjustable Wheel Diameter: Customizable setting for accurate speed and distance readings.

انځور 2.1: Visual representation of the display's main features.

انځور 2.2: The display's IPX5 waterproof rating ensures durability in wet conditions.

3. ترتیب او نصب کول

Proper installation is crucial for the display's functionality. Follow these steps carefully.

۴.۱ د ښودنې نصبول

1. Position the display on your eBike's handlebar in a location that is easily visible and accessible.
2. Secure the display bracket to the handlebar using the provided screws and tools. Ensure it is tightened firmly but do not overtighten to avoid damage.

3.2 د کیبلونو نښلول

1. Locate the 5-pin female round connector on the display cable.
2. Connect this cable to the corresponding male connector from your Bafang mid-drive motor system. Ensure the connection is secure and fully seated.

انځور 3.1: BAFANG SW102/T eBike Display mounted on a handlebar.

انځور 3.2: Display dimensions and cable length for installation planning.

۵.۵ د نصبولو ویډیو لارښود

4. عملیاتي لارښوونې

۸ پاور آن/بند

To power on the display, press and hold the power button (usually marked with an 'M' or power symbol) for a few seconds. To power off, repeat the same action.

4.2 Changing Pedal Assist Levels (PAS)

Use the '+' and '-' buttons on the control pad to cycle through the available pedal assist levels (0-5). Level 0 provides no motor assistance, while Level 5 provides maximum assistance.

انځور 4.1: Pedal Assist Levels (0-5) on the BAFANG SW102/T display.

۴.۳ د ښودنې پیرامیټرې بدلول

Briefly press the power button (M) to cycle through different display parameters such as speed, trip distance, odometer, battery voltage, time, and more.

4.4 Accessing Settings Menu

To enter the main settings menu, press and hold the '+' and '-' buttons simultaneously for a few seconds. From this menu, you can adjust various parameters including:

• واحد: Switch between Kilometers (km) and Miles (mi).
• روښانتیا: Adjust the display backlight intensity.
• د موټرو بندول: Set the time after which the display automatically turns off due to inactivity.
• د څرخ اندازه: Configure the wheel diameter for accurate speed and distance.
• د سرعت حد: Adjust the maximum assisted speed (may require a password).
• د ساعت ترتیب: اوسنی وخت تنظیم کړئ.

4.5 Video Guides for Operation and Settings

5. مشخصات

انځور 5.1: Detailed dimensions of the BAFANG SW102/T display.

6. ساتنه

To ensure the longevity and optimal performance of your BAFANG SW102/T display, follow these maintenance guidelines:

• پاکول: د سکرین او بدن د نرم، d سره پاک کړئamp ټوکر. د کثافاتو پاکوونکو، محلولونو، یا سخت کیمیاوي موادو کارولو څخه ډډه وکړئ، ځکه چې دا کولی شي سکرین یا c ته زیان ورسويasing.
• اړیکې: Periodically check all cable connections to ensure they are secure and free from corrosion or damage. Loose connections can lead to intermittent functionality.
• ذخیره کول: When not in use for extended periods, store the eBike in a dry, cool place away from direct sunlight and extreme temperatures.
• د اوبو ښکاره کول: While the display is IPX5 waterproof, avoid submerging it in water or exposing it to high-pressure water jets.

7. ستونزه حل کول

If you encounter issues with your BAFANG SW102/T display, refer to the following common troubleshooting steps:

• ښودنه نه فعالېږي:
  • Ensure the eBike battery is charged and properly connected.
  • Check all cable connections between the display and the motor system for looseness or damage.
  • Confirm the power button is being pressed and held for the required duration (typically a few seconds).
• Incorrect Speed/Distance Readings:
  • Verify that the correct wheel diameter is set in the display's settings menu (refer to Section 4.4).
  • Check the speed sensor and magnet for proper alignment and cleanliness.
• موقتي فعالیت:
  • Inspect all wiring for any signs of damage, pinching, or corrosion.
  • Ensure the display is securely mounted and not vibrating excessively.
• بې ځوابه تڼۍ:
  • Check for any debris or foreign objects obstructing the buttons.
  • If the display has been exposed to water, allow it to dry completely.

If these steps do not resolve the issue, please contact BAFANG customer support or a qualified eBike technician.

8. تضمین او ملاتړ

8.1 د تضمین معلومات

The BAFANG SW102/T eBike Display comes with a 1 کلن تضمین from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or improper installation.

8.2 د پیرودونکي ملاتړ

For technical assistance, warranty claims, or further inquiries, please refer to the contact information provided by your retailer or visit the official BAFANG webسایټ