JBL Stage 2 200P ځواکمن سب ووفر لارښوونې لارښود

1. پیژندنه

د JBL Stage 2 200P is a 300W powered subwoofer designed to enhance the low-frequency performance of your home audio system. Engineered at JBL's Acoustic Engineering Center of Excellence in Northridge, California, this subwoofer is part of the Stage series, delivering deep and powerful bass. It features a front-firing 10-inch (250mm) Polycellulose low-frequency woofer and dual rear-firing tuned ports for optimal bass response. A comprehensive set of controls allows for seamless integration into various audio setups.

2. کلیدي ځانګړتیاوې

• ۱۲ انچه (۳۰۰ ملي متره) پولی سیلولوز ریبډ مخروط د ټیټ فریکونسۍ ووفر: Delivers robust and accurate bass.
• 150W RMS (300W متحرک) Ampژوندی: برابروي ample power for dynamic low-frequency reproduction.
• دوه ګونی شاته-دوه اړخیزه ټون شوي بندرونه: Enhances bass output and extension.
• کراس اوور، کچه، او مرحله کنټرول: Allows for precise adjustment and integration with main speakers.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي د بکس خلاصولو پر مهال شتون لري:

• JBL Stage 2 200P Powered Subwoofer
• د بریښنا تار
• د کارونکي لارښود (دا لاسوند)

4. ترتیب کول

4.1. ځای پرځای کول

The placement of your subwoofer significantly impacts its performance. Experiment with different locations to find the best bass response in your listening area. Generally, placing the subwoofer in a corner can enhance bass output, while placing it along a wall can provide a more balanced sound. Avoid placing it directly against a wall or in a cabinet without proper ventilation.

شکل 1: مخکی view د JBL Stage 2 200P Subwoofer. This image shows the subwoofer's front grille, which can be removed to reveal the woofer cone.

شکل 2: مخکی view د JBL Stage 2 200P Subwoofer with the grille removed, highlighting the 10-inch Polycellulose ribbed cone woofer.

4.2. ارتباطات

فرعي ووفر خپل آډیو ریسیور سره وصل کړئ یا amplifier using an LFE (Low-Frequency Effects) output or stereo RCA outputs. For optimal performance, use a dedicated subwoofer output from your receiver.

1. د LFE داخلول: If your receiver has an LFE output, connect a single RCA cable from the receiver's LFE output to the subwoofer's LFE input.
2. د کرښې په کچه داخلې: If your receiver does not have an LFE output, connect RCA cables from the receiver's stereo pre-out (left and right) to the subwoofer's Line-Level inputs.

شکل 3: شاته view د JBL Stage 2 200P Subwoofer, displaying the control panel, input/output connections, and dual rear-firing tuned ports.

شکل 4: مفصل view of the rear control panel, illustrating the Crossover, Volume, Phase, and Power Mode settings for system integration.

4.3. د بریښنا پیوستون

Once audio connections are made, connect the supplied power cord to the subwoofer's power input and then to a suitable AC wall outlet. The subwoofer features a power mode switch (On/Auto/Normal/Reverse) for convenient operation.

5. عملیات

5.1. کنټرول اوورview

The rear panel of the JBL Stage 2 200P subwoofer provides several controls for fine-tuning its performance:

• د حجم (کچه) کنټرول: د سب ووفر ټولیز محصول کچه تنظیموي. د ټیټ ترتیب سره پیل کړئ او په تدریجي ډول لوړ کړئ تر هغه چې باس ستاسو د اصلي سپیکرو سره په بې ساري ډول مخلوط شي.
• د کراس اوور کنټرول: Sets the upper frequency limit for the subwoofer. Frequencies above this setting will be sent to your main speakers. Adjust this to match the low-frequency capabilities of your main speakers. A common starting point is 80 Hz.
• د مرحلې کنټرول (0°/180°): ستاسو د اصلي سپیکرو په پرتله د سب ووفر د محصول مرحله تنظیموي. د دواړو ترتیباتو سره تجربه وکړئ ترڅو هغه ومومئ چې خورا اغیزمن او همغږي باس چمتو کوي.
• Power Mode Switch (On/Auto/Normal/Reverse):
  • پر: فرعي ووفر په دوامداره توګه فعال پاتې کیږي.
  • اتومات: The subwoofer automatically turns on when an audio signal is detected and enters standby mode after a period of inactivity.
  • Normal/Reverse: These settings might refer to specific phase adjustments or power-saving modes. Refer to the detailed manual for specific model functionality.

5.2. Initial Adjustment

1. ترتیب کړئ حجم control to its minimum position.
2. ترتیب کړئ کراس اوور control to approximately 80 Hz, or as recommended by your main speaker manufacturer.
3. ترتیب کړئ پړاو switch to 0°.
4. ترتیب کړئ د بریښنا حالت to "Auto" for convenience.
5. Play some audio with significant bass content.
6. په تدریجي ډول زیاتوالی حجم control until the bass output is balanced with your main speakers.
7. د دې سره تجربه وکړئ پړاو switch (0° vs. 180°) to determine which setting provides the most natural and impactful bass in your listening position.
8. Further fine-tune the کراس اوور او حجم controls to achieve optimal integration and desired bass response.

6. ساتنه

• پاکول: Use a soft, dry cloth to clean the subwoofer cabinet. Avoid using abrasive cleaners, waxes, or solvents.
• وینټیلیشن: Ensure adequate ventilation around the subwoofer to prevent overheating. Do not block the rear ports or place the unit in an enclosed space without airflow.
• سمبالول: کله چې فرعي ووفر حرکت کوئ، نو په احتیاط سره یې له اساس څخه پورته کړئ. د غورځولو یا قوي اغیزو سره د مخ کیدو څخه ډډه وکړئ.

7. ستونزه حل کول

8. مشخصات

شکل 5: اړخ view of the subwoofer illustrating its physical dimensions.

9. تضمین او ملاتړ

د JBL Stage 2 200P Powered Subwoofer comes with a limited warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty card included in your product packaging or visit the official JBL webسایټ. د تخنیکي ملاتړ، د ستونزو حل کولو مرستې، یا د خدماتو پوښتنو لپاره، مهرباني وکړئ د JBL پیرودونکو ملاتړ سره د دوی د رسمي چینلونو له لارې اړیکه ونیسئ.

You can visit the official JBL Store for more information: په ایمیزون کې د JBL پلورنځی