1. محصول ختم شوview
The TP-Link Omada Wireless Access Point BE22000 (EAP783) is a high-performance tri-band Wi-Fi 7 access point designed for high-density environments. It offers advanced wireless technologies to ensure robust and seamless connectivity for business and personal use.
- BE22000 ټرای-بنډ وای فای 7: Delivers speeds of 11520 Mbps (6 GHz) + 8640 Mbps (5 GHz) + 1376 Mbps (2.4 GHz) for a buffer-free experience.
- 2 x 10G Ports: Unlocks the full potential of Wi-Fi 7 for ultra-fast wired connections.
- د ۶ GHz بانډ پاک کړئ: Provides cleaner and wider band resources for enhanced Wi-Fi performance.
- ۳۲۰ میګاهرتز بینډ ویت: Enables many more simultaneous transmissions at the fastest possible speeds.
- لږ ځنډ او مداخله: Multi-Link Operation (MLO) and Multi-RUs ensure high performance of your network.
- د اوماډا SDN ملاتړ: Integrates with the Omada Software Defined Networking (SDN) platform for centralized management.
- پرمختللې بېسیم ټیکنالوژي: Supports Mesh WiFi, Seamless Roaming (requires Omada SDN controllers), Band Steering, Load Balancing, Airtime Fairness, and Beamforming technologies.
۲. په بکس کې څه دي؟
Upon unboxing your TP-Link Omada Wireless Access Point BE22000 (EAP783), you should find the following items:
- EAP783 د لاسرسي نقطه
- د نصبولو لارښود
- د چت / دیوال نصبولو کټونه
۴. د تنظیم لارښوونې
Follow these steps to set up your Omada EAP783 Access Point:
- پورته کول: Use the provided Ceiling/Wall Mounting Kits to securely install the EAP783 in your desired location. Ensure the location allows for optimal Wi-Fi coverage.
- د بریښنا او شبکې اتصال: Connect an Ethernet cable from your PoE++ enabled switch (10 Gbps PoE++ Port recommended) to the EAP783. The device will power on automatically via Power over Ethernet (PoE). If PoE is not available, connect a 12V DC power adapter (not included) to the device.
- Omada SDN Controller Setup: For centralized management and advanced features like Mesh WiFi and Seamless Roaming, download and install the Omada SDN Controller software or use a Cloud-based controller.
- Device Adoption: Launch the Omada SDN Controller and follow the on-screen instructions to discover and adopt your EAP783 Access Point into your network.
- د وائی فای ترتیب: Create your desired Wi-Fi networks (SSIDs) and configure security settings within the Omada SDN Controller.
4. عملیاتي لارښوونې
Once your EAP783 is set up, it will broadcast your configured Wi-Fi networks. Devices can connect to these networks for high-speed internet access.
- بې سیم رومینګ: For networks with multiple Omada EAPs, devices will automatically switch to the access point with the strongest signal as you move, ensuring uninterrupted connectivity.
- Omada SDN Management: Use the Omada SDN Controller (via web interface or mobile app) to monitor network status, manage connected clients, adjust Wi-Fi settings, and perform firmware updates.
- د میلمه شبکه: Create separate guest networks with captive portal authentication for secure and controlled guest access.
5. پرمختللي ځانګړتیاوې
Leverage the advanced capabilities of your EAP783 for optimized network performance:
- څو اړخیز عملیات (MLO): Combines multiple bands (2.4 GHz, 5 GHz, 6 GHz) to increase throughput and reduce latency for Wi-Fi 7 clients.
- څو-RUs: Enhances efficiency by allowing multiple users to transmit data simultaneously on different resource units within the same channel.
- ۳۲۰ میګاهرتز بینډ ویت: Utilizes wider channels in the 6 GHz band to deliver unprecedented speeds and capacity.
- د بانډ سټیرینګ: Automatically directs dual-band clients to the less congested 5 GHz or 6 GHz band for better performance.
- د بار توازن: Distributes client connections evenly among multiple access points to prevent overloading any single EAP.
- د هوايي وخت عادلانه والی: Ensures that slower clients do not monopolize airtime, allowing faster clients to achieve higher speeds.
- بیم جوړونه: د وصل شویو وسیلو په لور د وای فای سیګنالونه تمرکز کوي، د سیګنال ځواک او رینج ښه کوي.
6. مشخصات
| فیچر | تفصیل |
|---|---|
| بې سیم ډول | 802.11.be (وای فای 7) |
| برانډ | TP-لینک |
| د توکي ماډل شمیره | د EAP783 |
| عملیاتي سیسټم | زاین او ایس |
| د توکي وزن | ۲.۴۵ پونډه |
| د محصول ابعاد | 11.9 x 12 x 3.3 انچه |
| رنګ | سپین |
| جوړونکی | TP-لینک |
| ځانګړی ځانګړنه | Beamforming, Remote Access |
| د فریکونسی بانډ ټولګی | درې-بنډ |
| مطابقت لرونکې وسیلې | شخصي کمپیوټر |
| وړاندیز شوي استعمالونه | سوداګرۍ |
| د ارتباط ټیکنالوژي | ایترنیټ، وای فای |
| د انتن ډول | ثابت شوی |
7. ستونزه حل کول
If you encounter issues with your EAP783 Access Point, consider the following general troubleshooting steps:
- اړیکې چیک کړئ: Ensure all Ethernet cables are securely connected and that the device is receiving power (either via PoE or power adapter).
- Verify Omada Controller Status: Confirm that your Omada SDN Controller is running and the EAP783 is showing as 'Connected'.
- وسیله بیا پیل کړئ: Power cycle the EAP783 by disconnecting and reconnecting its power source.
- د فرم ویئر تازه کول: Check the Omada SDN Controller for available firmware updates and install them to ensure optimal performance and stability.
- د فابریکې ډیفالټ ته بیا تنظیم کړئ: If issues persist, perform a factory reset using the reset button on the device (refer to the Installation Guide for location). Note that this will erase all configurations.
8. تضمین او ملاتړ
The TP-Link Omada Wireless Access Point BE22000 (EAP783) comes with a 5-Year Warranty.
For technical support, warranty claims, or additional assistance, please contact TP-Link support:
- تلیفون: (866) 225-8139
- Webسایټ: زما محصولات.tp-link.com/us
- بریښنالیک: ملاتړ.USA@tp-link.com
