1. پیژندنه
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your ECHO ECS300T/S 10-inch (25cm) Sprocket Nose Bar Chainsaw. Please read this manual thoroughly before using the chainsaw and keep it for future reference. Adherence to these instructions will ensure optimal performance and user safety.
2. د خوندیتوب لارښوونې
د زنځیرونو چلول خطرناک کیدی شي که چیرې د خوندیتوب مناسب احتیاطي تدابیر ونه نیول شي. تل خوندیتوب ته لومړیتوب ورکړئ ترڅو د جدي ټپي کیدو یا مړینې مخه ونیسئ.
- شخصي محافظتي تجهیزات (PPE): Always wear a safety helmet, eye protection, hearing protection, heavy-duty gloves, chainsaw protective trousers or chaps, and safety boots.
- د کار ساحه: ډاډ ترلاسه کړئ چې د کار ساحه د لیدونکو، ماشومانو او څارویو څخه پاکه ده. د نورو خلکو او شیانو څخه خوندي واټن وساتئ.
- د عملیاتو دمخه چک: Before each use, inspect the chainsaw for loose parts, damage, or wear. Ensure the chain brake is functional and the chain is properly tensioned and sharp.
- Fuel Handling (for gasoline models): Handle fuel in a well-ventilated area, away from ignition sources. Do not smoke while refueling. Wipe up any spills immediately.
- د کک بیک مخنیوی: Be aware of the risk of kickback. Avoid cutting with the tip of the guide bar. Maintain a firm grip with both hands.
- باثباته پښه: Always maintain secure footing and balance. Do not overreach.
- د هوا شرایط: Do not operate the chainsaw in adverse weather conditions such as heavy rain, strong winds, or icy conditions.
- ستړیا: Do not operate the chainsaw when tired or under the influence of alcohol or medication.
3. محصول ختم شوview
The ECHO ECS300T/S is a compact and powerful chainsaw designed for various cutting tasks. Familiarize yourself with its components for safe and effective use.
یو سر view of the ECHO ECS300T/S chainsaw, featuring a grey and black body with a 10-inch sprocket nose bar and chain. The ECHO logo is visible on the bar and engine casing.
مهمې برخې:
- لارښود بار: The metal bar that supports and guides the saw chain. This model features a 10-inch (25cm) sprocket nose bar.
- د سپو زنځیر: The cutting chain that rotates around the guide bar. This model uses a 91PX specification chain.
- د انجن کور: Contains the engine, fuel tank, and oil tank.
- مخکینۍ دستګاه: For gripping the chainsaw with your left hand.
- شاته لاسي: For gripping the chainsaw with your right hand, incorporating the throttle trigger and safety lock-out.
- د زنځیر بریک: A safety device designed to stop the chain instantly in case of kickback.
- د پیل لاستی: په لاسي ډول د انجن پیل کولو لپاره کارول کیږي.
- د تیلو کیپ: For the gasoline tank.
- د تیلو پوښ: For the chain lubricant oil tank.
4. ترتیب کول
4.1 پیک کول
Carefully remove all components from the packaging. Check for any damage during transit. Ensure all parts listed in the packing list are present.
4.2 Fuel and Oil Mixture
This chainsaw operates on a mixture of gasoline and 2-stroke engine oil. Use high-quality unleaded gasoline and a premium 2-stroke engine oil specifically designed for air-cooled engines. Refer to the engine oil manufacturer's instructions for the correct mixing ratio, typically 50:1 (50 parts gasoline to 1 part oil) or 25:1. Mix fuel in a separate, approved fuel container. Always add oil to gasoline, not the other way around, and shake well before filling the fuel tank.
- Fill the fuel tank with the prepared fuel mixture.
- Fill the chain oil tank with high-quality bar and chain lubricant. Do not use waste oil or motor oil.
۵.۲ د بار او زنځیر نصب کول
- Ensure the engine is off and the chain brake is engaged.
- Remove the chain cover nuts and the chain cover.
- Place the guide bar onto the studs, ensuring the chain tension pin engages with the hole in the guide bar.
- Carefully fit the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges of the chain are facing forward on the top of the guide bar.
- Replace the chain cover and loosely tighten the nuts.
۵.۲ د زنځیر د فشار تنظیم کول
Proper chain tension is crucial for safe and efficient operation. The chain should be snug against the guide bar, but still able to be pulled around by hand with light effort. There should be no sag on the underside of the guide bar.
- With the chain cover nuts slightly loose, use the tensioning screw (usually located on the side of the chainsaw) to adjust the chain tension.
- Lift the tip of the guide bar slightly while tightening the chain cover nuts firmly.
- Check the tension again. The chain should not bind and should move freely.
5. عملیات
5.1 د انجن پیل کول
Always start the chainsaw on a firm, flat surface, ensuring the chain brake is engaged.
کولډ اسٹارټ:
- د زنځیر بریک مشغول کړئ.
- د چوک لیور بشپړ چوک حالت ته تنظیم کړئ.
- د پرائمر بلب څو ځله فشار ورکړئ تر هغه چې د بیرته ستنیدو په لیکه کې تېل ښکاره شي.
- Pull the starter handle firmly and smoothly until the engine fires (usually a few pulls).
- Once the engine fires, immediately push the choke lever to the HALF CHOKE or RUN position.
- Pull the starter handle again until the engine starts and runs.
- Allow the engine to warm up for a few moments, then disengage the chain brake and gently blip the throttle to return to idle.
ګرم پیل:
- د زنځیر بریک مشغول کړئ.
- Set the choke lever to the RUN position.
- د سټارټر لاستی تر هغه وخته کش کړئ چې انجن پیل شي.
۳.۲ د پرې کولو تخنیکونه
Always use both hands to operate the chainsaw. Maintain a firm grip and stable footing.
- غورځول: For felling small trees, plan your escape route and ensure no one is in the fall zone. Make a directional notch first, then a felling cut from the opposite side.
- پړسوب: Remove branches from a felled tree. Work from the base towards the top, supporting the branch if it's under tension.
- ټک کول: Cutting a felled tree into sections. Be aware of pinching and rolling logs. Use a sawhorse or support logs to keep the chain off the ground.
5.3 د انجن ودرول
To stop the engine, simply press the engine stop switch to the OFF position. Engage the chain brake immediately after stopping.
6. ساتنه
ستاسو د زنځیر آرې د اوږد عمر او خوندي فعالیت لپاره منظم ساتنه اړینه ده.
۷.۰ ورځني چکونه
- Check chain tension and sharpness.
- د لارښود بار د اغوستلو یا زیان لپاره معاینه کړئ.
- Verify chain brake functionality.
- Check fuel and chain oil levels.
- د هوا فلټر پاک کړئ.
۵.۲ د زنځیر تیزول
A sharp chain is critical for efficient cutting and safety. Sharpen the chain regularly using a round file of the correct diameter (refer to chain specifications, typically 4.0mm for 91PX chain) and a flat file for depth gauges. Maintain consistent angles and file all cutters evenly.
۶.۲ د لارښود بار ساتنه
- Clean the guide bar groove to remove sawdust and debris.
- د لارښود بار په دوره یي ډول وګرځوئ ترڅو ډاډ ترلاسه کړئ چې دا یوشان اغوستل کیږي.
- Check the sprocket nose for smooth rotation and lubrication.
۵.۱ د هوا فلټر پاکول
Remove the air filter and clean it with warm, soapy water. Rinse thoroughly and allow it to dry completely before reinstallation. Replace if damaged or excessively dirty.
۸.۳ د سپارک پلګ ساتنه
Inspect the spark plug periodically. Clean any carbon deposits and adjust the electrode gap if necessary. Replace the spark plug annually or if it shows signs of wear.
6.6 ذخیره کول
Before long-term storage, drain the fuel tank or run the engine until it runs out of fuel. Clean the chainsaw thoroughly. Store in a dry, secure location away from children and ignition sources.
7. ستونزه حل کول
دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو یې د خپل زنځیر آرې سره مخ کیدی شئ.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| انجن به نه پیل کیږي | No fuel, incorrect choke setting, fouled spark plug, clogged fuel filter, engaged chain brake. | Check fuel level, adjust choke, clean/replace spark plug, clean/replace fuel filter, disengage chain brake. |
| Chainsaw cuts poorly | Dull chain, incorrect chain tension, worn guide bar, insufficient chain oil. | Sharpen chain, adjust tension, replace guide bar, check oil level and oiler function. |
| انجن د بریښنا نشتوالی | Clogged air filter, incorrect fuel mixture, worn spark plug, carburetor issues. | Clean air filter, use correct fuel mixture, replace spark plug, consult service center for carburetor. |
| ډیر وایبریشن | Loose components, damaged chain or guide bar. | Tighten all fasteners, inspect and replace damaged chain/bar. |
8. مشخصات
- نښه: ECHO
- ماډل: ECS300T/S
- د محصول ابعاد: 25.7 سانتي متره (اوږدوالی) x 21.4 سانتي متره (پلورل) x 21 سانتي متره (لوړوالی)
- د محصول وزن: 3 کیلوګرامه
- د زنځیر اوږدوالی: 25 سانتي متره (10 انچه)
- Guide Bar Type: Sprocket Nose Bar
- Chain Specification: 91PX
- د بریښنا سرچینه: Gasoline Engine (based on visual evidence and typical chainsaw design for 91PX chain)
- First Available Date on Amazon.co.jp: 2024/6/4
9. تضمین او ملاتړ
Specific warranty details and direct support contact information are not available in the provided product data. For warranty claims, technical support, or service, please refer to the documentation included with your purchase or contact your authorized ECHO dealer or the retailer from whom you purchased the product.
