د ټیلټونیکا RUT241 صنعتي سیلولر روټر کارونکي لارښود

1. پیژندنه

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Teltonika RUT241 Industrial Cellular Router. The RUT241 is designed for reliable 4G LTE and 3G connectivity, featuring Wi-Fi and two Ethernet ports, along with automatic WAN failover for continuous connection. Its robust industrial design and compact size make it suitable for various IoT and M2M applications, particularly in North America, with compatibility across Verizon, AT&T, and T-Mobile networks.

2. د خوندیتوب معلومات

• Ensure the device is powered by the specified 9-30 VDC power supply. Using an incorrect power source may damage the device and void the warranty.
• وسیله د رطوبت، سختې تودوخې، یا مستقیم لمر وړانګو سره مه مخ کوئ.
• وسیله د تودوخې سرچینو ته نږدې یا په خرابه هوا لرونکي سیمو کې د ځای پر ځای کولو څخه ډډه وکړئ.
• Only use accessories and antennas approved by Teltonika.
• د وسیلې د خلاصولو یا بدلولو هڅه مه کوئ. ټولې خدمتونه وړ پرسونل ته راجع کړئ.
• د سیمه ییزو مقرراتو سره سم د بریښنایی کثافاتو مسؤلیت سره تصفیه کړئ.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

• Teltonika RUT241 Router
• د 9 واټو بریښنا رسولو واحد (PSU)
• 2 x LTE Antennas (swivel, SMA male)
• 1 x Wi-Fi Antenna (swivel, RP-SMA male)
• ایترنیټ کیبل (1.5 متر)
• SIM Adapter Kit
• د چټک پیل لارښود (QSG)

4. وسیله ختمه شوهview

The Teltonika RUT241 router features various ports, indicators, and connectors for its operation. Familiarize yourself with the device's layout before proceeding with installation.

شکل 4.1: مخکی view of the RUT241 router, displaying the model number, Teltonika branding, power input specifications (9-30 VDC), and the default IP address (192.168.1.1).

شکل 4.2: زاویه view of the RUT241, highlighting the WAN and LAN Ethernet ports, the 4-pin industrial DC power socket, and LED indicators for signal strength and network status.

شکل 4.3: بل زاویه لرونکی view of the RUT241, showing the SMA male connectors for LTE antennas, the RP-SMA male connector for the Wi-Fi antenna, and the recessed reset button.

شکل 4.4: اړخ view of the RUT241, providing a clear look at the WAN and LAN ports, power input, signal strength LEDs, and antenna connectors.

شکل 4.5: لاندې view of the RUT241, showing the SIM card slot cover and mounting screw points for industrial installations.

شکل 4.6: پورته view of the RUT241, detailing the Wi-Fi, Reset, and Mobile antenna connectors.

5. ترتیب کول

5.1. د سیم کارت نصب کول

1. ډاډ ترلاسه کړئ چې روټر بند دی.
2. Locate the SIM card slot on the bottom of the device (refer to Figure 4.5).
3. Use the provided SIM adapter kit if your SIM card is not standard size.
4. Insert the prepared SIM card into the slot until it clicks into place.
5. Replace the SIM card slot cover securely.

5.2. د انتن پیوستون

1. Connect the two LTE antennas to the SMA male connectors labeled "MOBILE" on the device (refer to Figure 4.6).
2. Connect the Wi-Fi antenna to the RP-SMA male connector labeled "WIFI" (refer to Figure 4.6).
3. د غوره سیګنال استقبال لپاره انتنونه ځای په ځای کړئ.

5.3. د بریښنا پیوستون

1. Connect the 9 W PSU to the 4-pin industrial DC power socket on the router.
2. Plug the PSU into a suitable power outlet. The router will power on automatically.

5.4. ابتدايي لاسرسی

1. Connect your computer to the router's LAN port using the provided Ethernet cable.
2. خلاص a web براوزر او ډیفالټ IP پتې ته لاړ شئ: 192.168.1.1.
3. Follow the on-screen instructions to complete the initial configuration, including setting up a new password.

6. عملیاتي لارښوونې

6.1. Mobile Connectivity

The RUT241 supports 4G LTE (Cat 4) and 3G connectivity. Once the SIM card is installed and the device is powered on, it will automatically attempt to establish a mobile connection. The signal strength LEDs on the device indicate the current mobile signal quality.

6.2. WAN Failover

The router is equipped with WAN failover functionality, ensuring continuous internet access. If the primary WAN connection (e.g., Ethernet WAN) fails, the router will automatically switch to the available backup connection (e.g., cellular 4G LTE) to maintain network uptime.

۸.۲.۱. د وای فای هټ سپټ

The RUT241 functions as a wireless access point, providing Wi-Fi connectivity for up to 50 simultaneous users. Default Wi-Fi credentials can be found on the device label or in the Quick Start Guide. It is recommended to change the default Wi-Fi password during initial setup for security.

6.4. Remote Management and VPN

For advanced management and secure access, the RUT241 supports Teltonika Remote Management System (RMS) and various VPN services. Refer to the Teltonika Networks Wiki for detailed configuration guides on these features.

7. ساتنه

• د فرم ویئر تازه معلومات: Regularly check the Teltonika Networks website for the latest firmware updates to ensure optimal performance, security, and access to new features.
• پاکول: د وسیلې د پاکولو لپاره نرم، وچ ټوکر وکاروئ. مایع پاکوونکي یا ایروسول مه کاروئ.
• د چاپیریال شرایط: Ensure the router operates within its specified temperature and humidity ranges to prevent damage.
• د بیک اپ ترتیب: Periodically back up your router's configuration settings through the web interface to facilitate quick restoration if needed.

8. ستونزه حل کول

8.1. هیڅ ځواک نشته

• Verify that the 9 W PSU is correctly connected to the router and a working power outlet.
• د هر ډول زیان لپاره د بریښنا کیبل چیک کړئ.
• د ننوتلو حجم ډاډمن کړئtage is within the 9-30 VDC range if using an alternative power source.

8.2. No Internet Connection (Mobile)

• Confirm the SIM card is correctly inserted and activated with a data plan.
• Check the mobile signal strength LEDs on the router. If signal is weak, reposition antennas or the router.
• په روټر کې د APN ترتیبات تایید کړئ web interface. The default is "Auto", but some carriers may require specific settings.
• Ensure the cellular network is available in your location and compatible with the RUT241 (Verizon, AT&T, T-Mobile in North America).

۶.۴. د وای فای اتصال نشته

• ډاډ ترلاسه کړئ چې د وای فای انتن په خوندي ډول وصل دی.
• Check if Wi-Fi is enabled in the router's web انٹرفیس
• Verify Wi-Fi network name (SSID) and password.

۵.۳. لاسرسی نه شي کېدای Web انٹرفیس

• Ensure your computer is connected to the router's LAN port or Wi-Fi network.
• ډاډ ترلاسه کړئ چې ستاسو د کمپیوټر IP ترتیبات په اتوماتيک ډول د IP پته (DHCP) ترلاسه کولو لپاره تنظیم شوي دي.
• Confirm you are using the correct default IP address: 192.168.1.1.
• If you have changed the router's IP address, use the new address.
• If the issue persists, perform a factory reset by pressing and holding the reset button for approximately 10 seconds while the device is powered on. خبرداری: دا به ټول دودیز تشکیلات له منځه یوسي.

9. مشخصات

10. تضمین او ملاتړ

For warranty information and technical support, please refer to the official Teltonika Networks website or contact your authorized Teltonika Networks reseller. Detailed documentation, firmware updates, and support resources are available online.

Teltonika Networks Official Webسایټ: teltonika-networks.com