Hyper Ultra 20 Inch Fat Tire Electric Bike Instruction Manual

1. پیژندنه

This manual provides essential instructions for the assembly, operation, and maintenance of your Hyper Ultra 20 Inch Fat Tire Electric Bike. Please read this manual thoroughly before your first ride to ensure safe and optimal performance. Retain this manual for future reference.

Figure 1: Hyper Ultra 20 Inch Fat Tire Electric Bike (Blue model shown)

2. د خوندیتوب معلومات

ستاسو خوندیتوب خورا مهم دی. تل د موټر چلولو پر مهال هیلمټ او مناسب خوندیتوب وسایل واغوندئ. د ټولو سیمه ایزو ترافیکي قوانینو او مقرراتو اطاعت وکړئ. د خوندي عملیاتو لپاره منظم ساتنه خورا مهمه ده.

• د هر استعمال څخه مخکې د موټر چلولو څخه مخکې معاینه وکړئ، بریکونه، ټایرونه او بیټرۍ وګورئ.
• د الکول یا مخدره توکو تر اغیز لاندې مه چلوئ.
• Ensure all fasteners are securely tightened before riding.
• Do not exceed the maximum rider weight of 200 lbs.
• Familiarize yourself with the electric assist system and controls before riding in traffic.
• په ناوړه هوا شرایطو یا په ښویېدلو سطحو کې د سواری څخه ډډه وکړئ.

3. د بسته محتويات

Carefully unpack the box and ensure all components are present. If any items are missing or damaged, contact customer support.

• Hyper Ultra Electric Bike (partially assembled)
• 36V / 10.4Ah Lithium-ion Battery
• د بیټرۍ چارجر
• مخکینۍ څرخ
• پیډلونه (کیڼ او ښي)
• Seat with Seatpost
• مخکینۍ برخه
• د سر څراغ
• شاته ریک (مخکې نصب شوی)
• Tool Kit (Allen wrenches, spanners)
• د لارښود لارښود (دا سند)

2 شکل: چاودلی view of Hyper Ultra Electric Bike components.

4. تنظیم او مجلس

Follow these steps to assemble your Hyper Ultra Electric Bike. Refer to the provided videos for visual guidance.

4.1. د دستګاه نصبول

1. Insert the handlebar stem into the head tube of the frame.
2. Align the handlebar with the front wheel.
3. Tighten the stem bolts securely using the appropriate Allen wrench from the tool kit. Ensure the handlebar is firm and does not rotate.

Figure 3: Handlebar controls and gear shifter.

4.2. د مخکینۍ څرخ نصبول

1. Carefully lift the front of the bike and align the front wheel with the fork dropouts.
2. Ensure the brake rotor slides correctly into the brake caliper.
3. Insert the axle through the wheel hub and fork dropouts.
4. Secure the wheel with the provided nuts and washers, tightening them firmly with the appropriate wrench.

Figure 4: Attaching the front wheel to the fork.

4.3. د پیډل نصب کول

1. Identify the Left (L) and Right (R) pedals. The left pedal has a reverse thread.
2. Thread the Left pedal (L) counter-clockwise into the left crank arm.
3. Thread the Right pedal (R) clockwise into the right crank arm.
4. Tighten both pedals securely with the appropriate wrench.

Figure 5: Pedals with reflectors and crank arm attachment points.

4.4. د څوکۍ نصب کول

1. Insert the seatpost with the attached oversized padded seat into the seat tube of the bike frame.
2. د څوکۍ لوړوالی د آرامۍ سواری موقعیت سره تنظیم کړئ.
3. Secure the seatpost using the quick-release lever or bolt, ensuring it is tight enough to prevent movement during riding.

Figure 6: The oversized padded seat and its under-seat storage compartment.

4.5. Front Fender and Headlight Installation

1. Attach the front fender to the fork using the provided bolts and nuts.
2. Mount the headlight to the designated bracket on the front fork or handlebar.
3. Connect the headlight cable to the corresponding connector on the bike's wiring harness. Ensure a secure connection.

4.6. د بیټرۍ نصب او نښلول

1. Insert the 36V / 10.4Ah battery into its integrated flush mount compartment on the bike frame.
2. Ensure the battery is fully seated and locked into place using the provided key.
3. Connect any external battery cables if applicable.

Figure 9: Location of the charging port on the bike frame.

5. عملیاتي لارښوونې

5.1. Powering On/Off and Display Functions

1. To power on the bike, ensure the battery is locked and press the ON/OFF button on the controller. The display will illuminate.
2. The display shows current speed (MPH), odometer (ODO), battery level, and assist mode.
3. Use the '+' and '-' buttons to cycle through pedal assist levels (Low, Mid, High).
4. Press the 'MODE' button to switch between different display information or activate specific functions like 6km walking mode.
5. To power off, press and hold the ON/OFF button.

Figure 8: Electric Pedal Assist Controller with ON/OFF, Mode, and Assist Level buttons.

5.2. Pedal Assist Modes and Throttle Usage

The Hyper Ultra offers three riding modes: Low, Mid, and High pedal assist. The bike also features a throttle for power on demand.

• د پیډل مرسته: The motor provides assistance as you pedal. Select your desired assist level using the controller buttons.
• وهل: The twist shifter on the handlebar can be used as a throttle. Twist it to engage the motor without pedaling.

۳. د ګیر بدلون

Your bike is equipped with a 7-speed Shimano twist shifter and Shimano rear derailleur. Shift gears smoothly by twisting the shifter on the right handlebar. Shift to a lower gear for climbing hills and a higher gear for flat terrain or descents.

5.4. بریک کول

The bike features front and rear disc brakes for reliable stopping power. Apply both brakes simultaneously for optimal control and stopping distance. Avoid sudden, hard braking, especially on loose or wet surfaces.

6. د بیټرۍ چارج کول

The integrated 36V / 10.4Ah battery takes approximately 4 hours to fully charge. Always use the original charger provided with your bike.

1. ډاډ ترلاسه کړئ چې بایسکل بند دی.
2. Locate the charging port on the bike frame, typically near the battery compartment.
3. چارجر د چارج کولو بندر سره وصل کړئ.
4. Plug the charger into a standard electrical outlet. The charger indicator light will show charging status (e.g., red for charging, green for fully charged).
5. Once fully charged, disconnect the charger from the outlet first, then from the bike.

Figure 9: Location of the charging port on the bike frame.

7. ساتنه

منظم ساتنه ستاسو د بریښنایی بایسکل اوږد عمر او خوندي عملیات تضمینوي.

• ټایرونه: Check tire pressure before each ride. The 20in x 4in multi-surface fat tires require specific pressure for optimal performance and comfort.
• بریکونه: په منظم ډول د بریک پیډونو د اغوستلو معاینه وکړئ او ډاډ ترلاسه کړئ چې د بریک لیورونه ځواب ویونکي دي. د اړتیا سره سم تنظیم یا بدل کړئ.
• سلسله: زنځیر پاک او غوړ وساتئ ترڅو د زنګ وهلو مخه ونیسئ او د ګیر بدلونونه اسانه کړئ.
• د بیټرۍ پاملرنه: بیټرۍ په یخ او وچ ځای کې وساتئ. که چیرې د اوږدې مودې لپاره ذخیره کوئ، نو دا 50-70٪ ته چارج کړئ او په هرو 2-3 میاشتو کې یې چارج کړئ.
• پاکول: د موټرسایکل پاکولamp ټوکر. په بریښنایی اجزاو باندې د لوړ فشار اوبو جیټونو کارولو څخه ډډه وکړئ.
• بندونکي: Periodically check all bolts and nuts for tightness.

8. ستونزه حل کول

9. مشخصات

10. تضمین او ملاتړ

The Hyper Ultra Electric Bike comes with a د ټول عمر تضمین. For warranty claims or technical support, please contact Hyper Bicycles, Inc. customer service.

د اضافي ملاتړ یا پوښتنو لپاره، تاسو کولی شئ لیدنه وکړئ په ایمیزون کې هایپر سټور.