لیګرانډ ۰۵۰۱۷۹

Legrand 408700-40A Four Pole 10kA C Curve 415V AC DX3 MCB Instruction Manual

ماډل: 408700

1. پیژندنه

This manual provides essential information for the safe and effective installation, operation, and maintenance of the Legrand 408700-40A Four Pole 10kA C Curve 415V AC DX3 Miniature Circuit Breaker (MCB). Please read this manual thoroughly before installation or use to ensure proper functionality and safety.

2. د خوندیتوب معلومات

خبرداری: د بریښنا شاک خطر. نصب او ساتنه باید یوازې د وړ پرسونل لخوا ترسره شي.

  • Disconnect power before working on electrical circuits.
  • د بریښنایی سیسټم مناسب ځمکنی کول ډاډمن کړئ.
  • د مناسب شخصي محافظتي تجهیزاتو (PPE) څخه کار واخلئ، په شمول د موصل شوي دستکشو او خوندیتوب عینکو.
  • Do not operate the MCB if it appears damaged or shows signs of wear.
  • Adhere to all local and national electrical codes and regulations during installation and use.

3. محصول ختم شوview

The Legrand 408700-40A is a Four Pole Miniature Circuit Breaker designed for protection against overcurrents and short circuits in electrical installations. It features a 10kA breaking capacity and a C-curve tripping characteristic, making it suitable for general applications with moderate inrush currents.

Legrand 408700-40A Four Pole MCB

انځور: مخکینۍ برخه view of the Legrand 408700-40A Four Pole Miniature Circuit Breaker, showing the toggle switch and product labeling.

کلیدي ځانګړتیاوې:

  • Four Pole (FP) configuration for multi-phase protection.
  • 40 Ampد اوسني درجه بندي.
  • 10 kA breaking capacity for robust fault interruption.
  • C-curve tripping characteristic, suitable for resistive and inductive loads.
  • Rated for 415V AC systems.

4. نصب کول

Installation must be carried out by a qualified electrician in accordance with relevant electrical standards.

شرطونه:

  • Ensure the main power supply to the installation is completely OFF and locked out.
  • Verify that the MCB specifications (current rating, breaking capacity, curve type, voltage) match the circuit requirements.
  • د بریښنایی کار لپاره مناسب موصل شوي وسایل وکاروئ.

د نصبولو مرحلې:

  1. پورته کول: Securely mount the MCB onto a standard 35mm DIN rail within an appropriate electrical enclosure. Ensure it is firmly clipped into place.
  2. Wiring - Incoming: Connect the incoming phase conductors (L1, L2, L3, L4) to the upper terminals of the MCB. Ensure correct phase sequence and secure connection.
  3. Wiring - Outgoing: Connect the outgoing phase conductors to the lower terminals of the MCB.
  4. د ټرمینل ټینګول: Tighten all terminal screws to the recommended torque specified on the device or in the technical data sheet. Overtightening or undertightening can lead to poor contact and overheating.
  5. تایید: Double-check all connections for security, correct wiring, and absence of loose strands.
  6. د احاطې تړل: د برېښنا پوښ په خوندي ډول وتړئ.
  7. د بریښنا بیا رغونه: اصلي رسولو ته بریښنا بیرته ورکړئ.

5. عملیات

The MCB features a simple toggle switch for manual operation and visual indication of its status.

  • ON Position (Toggle Up): The circuit is closed, allowing electrical current to flow through the MCB.
  • OFF Position (Toggle Down): The circuit is open, disconnecting power. This is the manual OFF position.
  • TRIPPED Position (Toggle Middle): The MCB has automatically opened the circuit due to an overcurrent or short circuit. This is an automatic OFF position.

Resetting a Tripped MCB:

  1. د لامل پیژندنه: Before resetting, identify and rectify the cause of the trip (e.g., remove overloaded devices, fix short circuits, replace faulty appliances).
  2. لاسي بند: Move the toggle switch fully to the OFF (down) position. This resets the internal tripping mechanism.
  3. د بریښنا بیرته راګرځول: Move the toggle switch to the ON (up) position to restore power to the circuit.
  4. دوامداره سفر: If the MCB trips immediately again, do not attempt to reset it repeatedly. This indicates a persistent fault that requires professional investigation by a qualified electrician.

6. ساتنه

Legrand MCBs are designed for long-term reliability and are generally maintenance-free. However, periodic inspection is recommended to ensure continued safe operation.

  • بصري تفتیش (کلنی): With power disconnected, visually inspect the MCB for any signs of physical damage, discoloration, burn marks, loose connections, or evidence of overheating.
  • پاکول: If necessary, gently clean the exterior of the MCB with a dry, lint-free cloth. Do not use solvents, abrasive cleaners, or liquids.
  • د پای ټینګښت: Periodically check and re-tighten terminal screws if necessary, ensuring the main power supply is disconnected before performing this task.

WARNING: Do not attempt to repair a damaged or malfunctioning MCB. Replace it with an identical Legrand model to ensure continued protection and compliance with safety standards.

7. ستونزه حل کول

This section provides solutions to common issues encountered with Miniature Circuit Breakers.

ستونزهاحتمالي لاملد حل لاره
MCB trips frequentlyOverload on the circuit, short circuit, faulty appliance, incorrect MCB rating for the load.Reduce the load on the circuit, check for and rectify short circuits, inspect appliances for faults, verify if the MCB rating is appropriate for the connected load.
MCB does not resetPersistent fault (e.g., continuous short circuit or severe overload), internal damage to the MCB.Ensure the fault is completely cleared. If still unable to reset after clearing the fault, the MCB may be damaged and requires replacement by a qualified electrician.
MCB feels hot to the touchLoose terminal connections, continuous overload, undersized wiring for the circuit.With power off, check and tighten all terminal connections. Reduce the load on the circuit. Consult an electrician to assess wiring size if overheating persists.

8. مشخصات

  • نښه: Legrand
  • د ماډل شمیره: 408700
  • ډول: د کوچني سرکټ بریکر (MCB)
  • قطبونه: Four Pole (FP)
  • اوسنۍ درجه بندي: 40 Amps
  • د ماتولو ظرفیت: 10 kA
  • د منحنی ډول: C-Curve
  • والیtage درجه بندي: 415V AC
  • عمومي نوم: Switchgears
  • خالص مقدار: 1.00 شمېره
  • د لومړي شتون نیټه: ۱۵ جون ۲۰۲۲

9. تضمین او ملاتړ

For detailed warranty information, technical support, or service inquiries, please refer to the official Legrand website or contact your local authorized Legrand distributor. It is recommended to retain your purchase receipt as proof of purchase for any warranty claims.

لیګرانډ رسمي Webسایټ: www.legrand.co.in (مهرباني وکړئ سم سیمه ایز تایید کړئ webستاسو د ځای لپاره سایټ.)

اړوند اسناد - 408700

مخکېview Legrand DX3 6000A Tétrapolaire Differential Circuit Breaker Technical Specifications
Detailed technical specifications, features, connection diagrams, and performance curves for the Legrand DX3 6000A four-pole differential circuit breaker. Includes information on ratings, protection, installation, and accessories.
مخکېview لیګرانډ DPX3 630 الکترونیکي سرکټ ماتونکي - تخنیکي مشخصات او ډیټا شیټ
د لیګرانډ DPX3 630 بریښنایی سرکټ ماتونکو لپاره جامع تخنیکي مشخصات. دا سند د محصول ځانګړتیاوې، حد، ابعاد، وزن، بریښنایی او میخانیکي ځانګړتیاوې، د بریښنایی محافظت واحد ترتیبات، د مطابقت معیارونه، شته تجهیزات او لوازمات، او د مختلفو نسخو لپاره د ټریپ کولو منحني توضیحات ورکوي.
مخکېview Legrand DPX³ 250 1000V Circuit Breaker Installation Guide | Safety & Adjustment
Legrand DPX³ 250 1000V circuit breaker installation manual. Learn how to install, wire, and adjust protection settings (Ir, Ii) for this Legrand MCCB. Includes safety instructions and accessory mounting details.
مخکېview Legrand DNX3 MCB 4500 A / 6 kA: Technical Data Sheet
Detailed technical specifications and characteristics for the Legrand DNX3 MCB 4500 A / 6 kA Phase + Neutral circuit breaker. Includes dimensions, ratings, compliance, and performance curves.
مخکېview د لیګرانډ تخنیکي لارښود: د محافظتي وسایلو همغږي
د لیګرانډ څخه یو جامع تخنیکي لارښود چې د NF C 15-100 معیارونو سره سم د بریښنایی محافظت وسیلو د همغږۍ لپاره اصول او میتودونه توضیح کوي، په شمول د انتخاب او فیلییشن.
مخکېview Legrand DX³ 4-pole RCBO 6000 A Technical Data Sheet
Detailed technical specifications, characteristics, installation guidelines, and safety information for the Legrand DX³ 4-pole RCBO 6000 A, a residual current operated circuit breaker designed for electrical protection.