ATS BBPhotoPhone

ATS BBPhotoPhone Big Button Amplified Speakerphone User Manual

Model: BBPhotoPhone

1. پیژندنه

The ATS BBPhotoPhone is an amplified speakerphone designed for ease of use, featuring large buttons and photo memory keys. It functions as a standalone telephone or as a dialer for an existing landline. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

2. د محصول ب Featuresې

ATS BBPhotoPhone front view with large photo buttons

شکل 2.1: مخکی view of the ATS BBPhotoPhone, showcasing the large, customizable photo memory buttons and main control keys.

3. ترتیب کول

۲.۲ د تلیفون سره وصل کول

  1. Locate a standard telephone wall jack in your home or office.
  2. Connect one end of the provided telephone line cord to the 'LINE' jack on the back of the BBPhotoPhone.
  3. Connect the other end of the telephone line cord to the wall jack.
  4. If connecting another phone to the same line, use the 'PHONE' jack on the BBPhotoPhone to connect the additional telephone.
شاته view of ATS BBPhotoPhone showing phone jacks and switches

شکل 3.1: شاته view of the BBPhotoPhone, illustrating the telephone line input ('LINE'), auxiliary phone output ('PHONE'), and the 'ONE TOUCH/NORM' and 'RINGER' switches.

3.2 Inserting Photos into Memory Keys

The 10 memory keys are designed to hold small photos for easy visual identification of contacts. To insert a photo:

  1. Gently lift the clear plastic cover on each memory button.
  2. Insert a trimmed photo of the contact into the designated slot.
  3. Replace the clear plastic cover securely.

۴.۳ دیوال نصب کول (اختیاري)

The BBPhotoPhone can be wall-mounted for convenience. Use the integrated mounting holes on the back of the unit to secure it to a wall using appropriate screws (not included).

لاندې view of ATS BBPhotoPhone showing wall mount holes

شکل 3.2: لاندې view of the BBPhotoPhone, highlighting the wall mounting slots and speaker grille.

4. عملیاتي لارښوونې

4.1 Dialing Modes

The BBPhotoPhone offers two dialing modes, selectable via the 'ONE TOUCH/NORM' switch on the back of the unit:

4.2 Programming Memory Keys

To program a phone number into a photo memory key:

  1. فشار ورکړئ یادښت button. The 'IN USE' LED may illuminate.
  2. هغه د تلیفون شمیره ډایل کړئ چې تاسو یې ساتل غواړئ (تر ۱۶ عددونو پورې).
  3. Press the desired photo memory key (0-9) to save the number.
  4. The number is now stored. Repeat for other memory keys.

4.3 زنګ وهل

۵.۳ د سپیکر فون کارول

To use the speakerphone function:

  1. د زنګ وهلو پرمهال سپیکر button. The 'IN USE' LED will illuminate.
  2. Adjust the speaker volume using the slide control on the side of the unit.
اړخ view of ATS BBPhotoPhone showing speaker volume control

شکل 4.1: اړخ view of the BBPhotoPhone, indicating the location of the speaker volume slide control.

4.5 Mute and Hold Function

فشار ورکړئ HOLD/MUTE button during a call to place the call on hold. Music will play for the caller. Press again to resume the conversation.

۴.۴ د رنګر حجم تنظیم کول

Use the 'RINGER' switch on the back of the unit to select the desired ringer volume: Off, Low, or High.

5. ساتنه

To ensure the longevity and proper functioning of your BBPhotoPhone, follow these simple maintenance guidelines:

6. ستونزه حل کول

If you encounter issues with your BBPhotoPhone, please refer to the following common problems and solutions:

ستونزهاحتمالي لاملد حل لاره
No dial tone or power.د ټیلیفون لاین په سمه توګه نه دی وصل شوی.Ensure the telephone line cord is securely plugged into both the wall jack and the 'LINE' jack on the phone.
په سپیکر فون کې زنګ وهونکی نه اورېدل کېږي.Speaker volume is too low or muted.Adjust the speaker volume slide control to a higher level. Ensure the 'HOLD/MUTE' button is not active.
Ringer does not sound.Ringer switch is set to 'OFF'.Set the 'RINGER' switch on the back of the unit to 'LOW' or 'HIGH'.
Memory keys are not dialing correctly.Number not programmed or incorrect dialing mode.Reprogram the memory key (Section 4.2). Verify the 'ONE TOUCH/NORM' switch is set to the desired mode.

7. مشخصات

فیچرمشخصات
برانډATS
ماډلBBPhotoPhone
ابعاد (پکیج)19.71 x 12.5 x 5.89 سانتي متره
د توکي وزن372 ګرامه
د بریښنا سرچینهPhone Jack Powered
د ښودلو ډولLED
Primary Interfaceتڼۍ
مواداکریلونایتریل بوټاډین سټیرین (ABS)
د نصب کولو ډولدیوال غر
رنګغیر سپین
د تلیفون ډولکوډ شوی

8. تضمین او ملاتړ

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Assistive Technology Services directly. Keep your purchase receipt as proof of purchase.

اړوند اسناد - BBPhotoPhone

مخکېview ATS-20 Portable Radio User Manual and Specifications
User manual and specifications for the ATS-20 portable radio, covering features, operation, and technical details for receiving FM, AM, MW, SW, LW, USB, and LSB signals.
مخکېview ATS-11KW Dual Power Smart Automatic Transfer Switch User Manual
Comprehensive user manual for the ATS-11KW Dual Power Smart Automatic Transfer Switch, covering installation, operation, technical specifications, and safety guidelines for off-grid solar and wind power systems.
مخکېview H-RADIO 4.2 User Manual
This document provides a comprehensive guide to the H-RADIO 4.2, covering its features, operation, and settings. Learn about the main screen, indicators, buttons, and various modes of communication.
مخکېview ATS Triton Acoustic Receiver Software Manual - User Guide
Comprehensive user manual for the ATS Triton Acoustic Receiver software, detailing setup, configuration, data logging, analysis tools, and troubleshooting for advanced acoustic telemetry systems.
مخکېview ATS Large Full Cutoff LED Wall Pack: 80W & 100W Specifications and Installation
Detailed specifications, features, applications, and installation guide for the ATS Large Full Cutoff LED Wall Pack, available in 80W and 100W models with 0-10V dimming and photocell.
مخکېview ATS Triton Acoustic Receiver Software Manual
This user manual details the ATS Triton Acoustic Receiver Software, guiding users through setup, configuration, real-time data logging, file management, and analysis for ATS acoustic receivers. Essential for firmware versions 11 and above, it covers features like GPS integration, data filtering, and graphing tools.