1. پیژندنه
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Schlage 163604 Addison Lower Half Front Entry Handleset with Accent Lever. This handleset is designed to enhance both the security and aesthetic appeal of your front door. All Schlage front entry handlesets are precision-engineered for security and ease of installation.
Image 1.1: Schlage 163604 Addison Handleset. This image displays the main components of the handleset, including the exterior handleset, interior lever, latch, and mounting hardware.
2. د خوندیتوب معلومات
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in damage to the product, property, or personal injury.
- د نصبولو پرمهال تل مناسب خوندیتوب وسایل واغوندئ، لکه د خوندیتوب عینکې.
- Use only the tools specified in the installation guide.
- کوچني برخې د ماشومانو څخه لرې وساتئ.
- Do not modify the product in any way, as this may compromise its security features and void the warranty.
3. د بسته محتويات
د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:
- Exterior Handleset Assembly
- Interior Accent Lever Assembly
- د لیچ میکانیزم
- اعتصاب پلیټ
- د نصبولو پیچونه او فاسټینرونه
- د نصبولو نمونه (که شامله وي)
- کلیدونه (که د تطبیق وړ وي)
4. ترتیب او نصب کول
The Schlage 163604 handleset is designed for easy installation and can be fitted to both right-hand and left-hand door swings. Its patented adjustable bottom thru-bolt allows for vertical adjustment of 1-1/2 inches to accommodate various pre-existing door preparations.
4.1 د دروازې چمتو کول
- Ensure your door has the correct bore holes and backset. Refer to the included template for precise measurements.
- If replacing an existing handleset, remove the old hardware.
4.2 Installing the Latch
- Insert the latch into the edge bore hole of the door.
- Secure the latch with the provided screws. Ensure the latch bolt faces the correct direction for your door swing.
4.3 Installing the Exterior Handleset
- Position the exterior handleset assembly on the outside of the door, aligning the spindle with the latch mechanism.
- Feed the thru-bolt through the lower hole in the door. Adjust its position as needed using the patented adjustable feature.
4.4 Installing the Interior Lever
- Place the interior lever assembly on the inside of the door, aligning it with the exterior handleset and latch.
- Secure the interior and exterior components together using the provided screws. Tighten all screws firmly but do not overtighten.
4.5 د سټریک پلیټ نصب کول
- Align the strike plate with the latch bolt on the door frame.
- Mark and chisel out the necessary area for a flush fit, if required.
- Secure the strike plate with the provided screws.
5. عملیاتي لارښوونې
To operate your Schlage Addison Handleset:
- بندول: From the interior, rotate the thumbturn to the locked position. From the exterior, insert the key and turn to lock.
- د خلاصولو لپاره: From the interior, rotate the thumbturn to the unlocked position. From the exterior, insert the key and turn to unlock.
- خلاصول: Depress the thumbpiece on the exterior handleset or the lever on the interior to retract the latch bolt.
6. ساتنه
Proper maintenance ensures the longevity and smooth operation of your handleset.
- پاکول: لاستی په منظم ډول د نرم، ډ سره پاک کړئamp ټوکر. د کثافاتو پاکوونکو، محلولونو، یا سخت کیمیاوي موادو څخه ډډه وکړئ، ځکه چې دا کولی شي پای ته زیان ورسوي.
- غوړول: Periodically apply a small amount of graphite-based lubricant to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants, as they can attract dirt.
- ټینګول: Check all mounting screws periodically and tighten if necessary. Do not overtighten.
7. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Lever/Thumbpiece is stiff or sticky | Lack of lubrication, dirt buildup, misaligned components | Apply graphite lubricant to the latch mechanism. Clean the exterior. Check for proper alignment during installation. |
| Key does not turn smoothly | Dirt in keyway, worn key, lock mechanism needs lubrication | Apply graphite lubricant to the keyway. Try a spare key. |
| دروازه په سمه توګه نه تړل کېږي | Strike plate misalignment, latch bolt obstruction | Adjust the strike plate position. Ensure no debris is blocking the latch bolt. |
| Handleset feels loose | Mounting screws are loose | Tighten all visible mounting screws. |
8. مشخصات
- د ماډل شمیره: 163604
- نښه: سکلیج
- مواد: فلزي
- رنګ: ساټین نکل
- پای: ساټین
- سټایل: عصري
- د محصول ابعاد: 16.51 x 20.32 x 52.07 سانتي متره (6.5 x 8 x 20.5 انچه)
- د توکي وزن: ۷.۰ کیلو ګرامه (۱۵.۵ پونډه)
- د لاسوند ډول: لیور
- ځانګړې ځانګړنه: Easy to Install, Patented adjustable bottom thru-bolt
- جوړونکی: Allegion Canada Inc
- د اصلي هیواد: میکسیکو
9. تضمین او ملاتړ
Schlage products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty, and a 3-year electronics warranty (where applicable). For specific warranty details, product support, or to contact customer service, please visit the official Schlage webسایټ یا د تضمین کارت ته مراجعه وکړئ چې ستاسو د محصول سره شامل دي.
د نورو مرستو لپاره، مهرباني وکړئ لیدنه وکړئ د سکلیج پلورنځی.
