د بافنګ BBS02B 48V 750W د منځني ډرایو موټرو کنټرولر لارښوونې لارښود

1. پیژندنه

This manual provides comprehensive instructions for the BAFANG BBS02B 48V 750W Mid Drive Motor Controller. It covers product overview, installation procedures, operational guidelines, maintenance tips, and troubleshooting steps to ensure proper function and longevity of your controller. Please read this manual thoroughly before installation and use.

2. محصول ختم شوview

The BAFANG BBS02B 48V 750W controller is a critical component for BAFANG mid-drive electric bicycle motors, designed to manage power delivery and motor functions. This controller is an OEM part, ensuring reliability and compatibility with BAFANG systems.

کلیدي ځانګړتیاوې:

• درجه بندي Voltage: 48V
• اعظمي اوسنی: 24A
• درجه بندي بریښنا: 750W
• Integrated connectors for gear sensor and front light.
• Manufactured by BAFANG OEM for guaranteed compatibility and quality.

د اجزاوو پیژندنه:

The controller features various connectors for seamless integration into your e-bike system. Understanding each connection point is crucial for correct installation.

شکل 2.1: اوورview of BAFANG controller connectors including Holzer Motor Cable, Speed Transmission Cable, Motor Phase Cables, Speed Sensor Connection, 1T4 Motor Connection, Gear Shift Connection, Battery, and Front Lamp.

شکل 2.2: Comparison highlighting the upgraded version of the controller with built-in gear sensor and front lamp connections, absent in older versions.

3. ترتیب او نصب کول

Installation of the BAFANG BBS02B 48V 750W controller typically involves replacing an existing controller or integrating it into a new mid-drive motor system. Ensure the motor is disconnected from the power source before beginning any installation work.

د نصبولو مرحلې:

1. چمتووالی: Gather necessary tools. Ensure the e-bike battery is disconnected.
2. موټرو ته لاسرسی: Depending on your e-bike model, you may need to remove covers or components to access the mid-drive motor and its existing controller.
3. Disconnect Old Controller (if applicable): Carefully disconnect all cables from the old controller, noting their positions. Pay attention to the motor phase cables, battery connection, and sensor wires.
4. مهرونه معاینه کړئ: When replacing the controller, inspect the motor and cable entry seals. If damaged, new seals may be required to prevent water ingress.
5. نوی کنټرولر وصل کړئ: Refer to Figure 2.1 for connector identification. Connect the new controller to the motor phase cables, battery, speed sensor, gear shift sensor, and front lamp (if applicable). Ensure all connections are secure and correctly seated.
6. خوندي کنټرولر: Mount the new controller securely within the motor housing.
7. د ازموینې اړیکې: Before fully reassembling, connect the battery and perform a preliminary test to ensure the motor responds correctly.
8. بیا یوځای کول: Reassemble any removed covers or components.

مهم: Incorrect wiring can damage the controller or motor. If you are unsure about any step, consult a qualified technician.

4. عملیاتي لارښوونې

Once the BAFANG BBS02B 48V 750W controller is correctly installed, its operation is largely integrated with your e-bike's display and sensors. The controller interprets signals from the throttle, pedal assist sensor, and gear shift sensor to deliver power to the motor.

بنسټیز عملیات:

• پاور آن: Turn on your e-bike's battery and display unit. The controller will initialize.
• د پیډل مرسته: Begin pedaling, and the pedal assist sensor will signal the controller to provide motor assistance based on the selected assist level on your display.
• وهل: If equipped, the throttle provides on-demand power, overriding or supplementing pedal assist.
• د ګیر بدلون: The gear shift sensor (if connected) temporarily cuts motor power during gear changes to protect the drivetrain.

Note on Pedal Assist Configuration: Some users may modify the controller to alter pedal assist behavior. This typically involves adjusting specific wires or programming the controller. Such modifications are advanced and should only be performed by experienced individuals, as they may void the warranty or lead to system malfunction if done incorrectly.

5. ساتنه

Regular maintenance helps ensure the longevity and optimal performance of your BAFANG BBS02B 48V 750W controller.

د ساتنې لارښوونې:

• وچ ساتل: Protect the controller from excessive moisture and water exposure. While designed for outdoor use, prolonged submersion or high-pressure washing can cause damage.
• اړیکې معاینه کړئ: Periodically check all electrical connections for tightness and corrosion. Loose or corroded connections can lead to intermittent power or system failures.
• پاکوالی: Keep the controller and surrounding area free from dirt, dust, and debris. Use a soft, dry cloth for cleaning.
• د کیبل بشپړتیا: Inspect cables for any signs of wear, cuts, or damage. Replace damaged cables immediately to prevent short circuits or system malfunctions.
• د مهر بشپړتیا: Ensure all seals around the motor and cable entry points are intact and properly seated to prevent water and dust ingress into the controller housing.

6. ستونزه حل کول

This section addresses common issues you might encounter with your BAFANG BBS02B 48V 750W controller.

عام مسایل او حل لارې:

• Motor Not Responding / No Power:
  • د بیټرۍ اتصال او د چارج کچه وګورئ.
  • Verify all controller connections (motor phase, battery, sensors) are secure.
  • Inspect cables for visible damage.
• تروټل کار نه کوي:
  • Ensure the throttle cable is properly connected to the controller.
  • Check for any physical damage to the throttle unit or its wiring.
• Pedal Assist Not Functioning:
  • Verify the pedal assist sensor is correctly installed and connected.
  • Check for any obstructions or damage to the sensor.
• Intermittent Power / Erratic Behavior:
  • Loose connections are a common cause; re-check all plugs.
  • Ensure the controller is not overheating (though this is less common for a controller itself).

If troubleshooting steps do not resolve the issue, it may indicate a faulty component. Contact BAFANG support or a qualified e-bike technician for further assistance.

7. مشخصات

8. تضمین او ملاتړ

د تضمین معلومات:

This BAFANG controller comes with a Limited Warranty. Please refer to the original purchase documentation or contact your retailer for specific terms and conditions of the warranty. The warranty typically covers manufacturing defects under normal use.

د پیرودونکي ملاتړ:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the retailer where you purchased the product or visit the official BAFANG webد ملاتړ سرچینو لپاره سایټ.