د سارتوریس پرولین پلس پایپټ ملټي پیک LH-728671 کارن لارښود

1. پیژندنه

This manual provides comprehensive instructions for the safe and effective use of the Sartorius Proline Plus Pipette Multipack LH-728671. It covers product overview, setup, operation, maintenance, troubleshooting, and specifications. Please read this manual thoroughly before using the product to ensure proper handling and optimal performance.

2. محصول ختم شوview

The Sartorius Proline Plus Pipette Multipack LH-728671 is designed for precise liquid handling in laboratory environments. This multipack includes a selection of Proline Plus single-channel mechanical pipettes, compatible Optifit tip racks, and a linear stand for convenient storage.

۲.۱ برخې پکې شاملې دي:

• Proline Plus Pipettes:
  • One 2-20 µl Proline Plus Pipette
  • One 20-200 µl Proline Plus Pipette
  • One 100-1000 µl Proline Plus Pipette
• Optifit Tip Racks:
  • Compatible tip racks for 0.5-200 µl pipettes
  • Compatible tip racks for 10-1000 µl pipettes
• x3 Linear Stand & Pipette Holder

3. ترتیب کول

3.1 Assembling the Linear Stand

1. Unpack all components of the linear stand.
2. Connect the base parts securely. Ensure all connections are firm.
3. راټول شوی سټینډ په یوه مستحکم، هموار سطحه کېږدئ.

3.2 Placing Pipettes in the Stand

• Gently insert each Proline Plus pipette into the designated slots on the linear stand.
• Ensure pipettes are securely seated to prevent accidental falls.

3.3 Loading Tip Racks

• Open the Optifit tip rack packaging.
• Place the appropriate tip rack near your workspace for easy access during pipetting.
• Ensure the tip rack matches the volume range of the pipette being used.

4. عملیاتي لارښوونې

4.1 د حجم سمون

1. Turn the volume adjustment knob (located at the top of the pipette) clockwise to decrease the volume and counter-clockwise to increase it.
2. Set the desired volume, ensuring the display shows the correct value.
3. Do not exceed the maximum or go below the minimum volume range of the pipette.

4.2 Attaching a Tip

• Press the pipette nozzle firmly into a tip in the tip rack.
• Ensure the tip is securely attached and forms an airtight seal.

4.3 Aspirating Liquid

1. Press the operating button down to the first stop.
2. Immerse the tip into the liquid to the appropriate depth (typically 1-2 mm for small volumes, 3-6 mm for larger volumes).
3. Slowly release the operating button to aspirate the liquid. Wait a moment for the liquid to enter the tip completely.

4.4 Dispensing Liquid

1. Place the tip against the inner wall of the receiving vessel at a slight angle.
2. Press the operating button down slowly to the first stop to dispense the liquid.
3. Continue pressing the button to the second stop (blow-out) to expel any residual liquid from the tip.
4. Keep the button pressed and withdraw the pipette from the vessel.

4.5 Tip Ejection

• Point the pipette into a waste container.
• Press the tip ejector button to discard the used tip.

5. ساتنه

5.1 پاکول

• Regularly wipe the exterior of the pipettes with a soft cloth dampened with mild detergent or 70% ethanol.
• Do not immerse the entire pipette in liquid.
• For internal cleaning or decontamination, refer to the detailed instructions provided with individual pipette models or contact Sartorius service.

5.2 اندازه کول

• Pipettes should be calibrated regularly according to laboratory standards and regulatory requirements.
• Calibration should be performed by qualified personnel or an authorized service provider.

5.3 ذخیره کول

• Store pipettes vertically in the linear stand when not in use to prevent contamination and damage.
• Store in a clean, dry environment, away from direct sunlight and extreme temperatures.

6. ستونزه حل کول

6.1 Inaccurate Pipetting

• احتمالي لامل: Improper tip attachment. حل لاره: Ensure tip is securely and airtightly attached.
• احتمالي لامل: Incorrect pipetting technique. حل لاره: Review operating instructions for aspiration and dispensing.
• احتمالي لامل: Pipette requires calibration. حل لاره: Arrange for professional calibration.
• احتمالي لامل: Damaged tip cone or piston. حل لاره: Contact Sartorius service for inspection and repair.

6.2 Leaking Tip

• احتمالي لامل: Tip not properly seated. حل لاره: Re-attach tip firmly.
• احتمالي لامل: Incompatible tip used. حل لاره: Use only Sartorius Optifit tips.
• احتمالي لامل: Damaged O-ring or tip cone. حل لاره: Contact Sartorius service for inspection and repair.

6.3 Operating Button Sticking

• احتمالي لامل: ککړتیا. حل لاره: Clean the pipette exterior. If internal, contact service.
• احتمالي لامل: میخانیکي مسله. حل لاره: Contact Sartorius service.

7. مشخصات

• ماډل: LH-728671
• نښه: سارټوریوس
• Pipette Types: Proline Plus Single-Channel Mechanical Pipettes
• Included Pipette Volumes: 2-20 µl, 20-200 µl, 100-1000 µl
• Compatible Tip Racks: Optifit Tip Racks for 0.5-200 µl and 10-1000 µl
• لوازم: x3 Linear Stand & Pipette Holder
• د بسته ابعاد: 6 x 6 x 6 انچه
• د بسته وزن: 2 پونډه

8. تضمین او ملاتړ

For detailed warranty information, please refer to the documentation included with your product or visit the official Sartorius website. For technical support, service, or spare parts, please contact your local Sartorius representative or authorized dealer. Provide your product model number (LH-728671) and serial number when requesting support.