JBL ST 450 TRIO Super Tweeter Instruction Manual

1. پیژندنه

The JBL ST 450 TRIO Super Tweeter is designed for high-frequency sound reproduction with efficiency and low distortion. This component is suitable for various audio applications, including PA systems, automotive mini trios, and general sound reinforcement systems. Its phenolic diaphragm ensures a clear high-frequency timbre, while the aluminum ring magnetic assembly provides definition and efficiency across its operational range.

2. د خوندیتوب معلومات

Please read all safety instructions before installing and operating this product. Failure to follow these instructions may result in injury or damage to the product or other equipment.

• بریښنایی خوندیتوب: Ensure all power connections are made correctly and securely. Disconnect power before making any connections or disconnections. Incorrect wiring can cause electrical shock or damage to your audio system.
• د اوریدلو محافظت: د لوړ غږ فشار کچې سره اوږد مهاله تماس کولی شي د اوریدلو دایمي زیان لامل شي. د غږ کچې تنظیمولو پرمهال له احتیاط څخه کار واخلئ.
• لګول: Always mount the tweeter securely to prevent it from becoming a projectile in case of sudden stops or accidents. Consult a professional installer if you are unsure about any aspect of the installation process.
• وینټیلیشن: Ensure adequate ventilation around the tweeter to prevent overheating, especially during extended use at high power levels.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

• 1 x JBL ST 450 TRIO Super Tweeter
• تخنیکي بروشر
• د تضمین پاڼی
• Bearing (as included component)

4. ترتیب او نصب کول

Proper installation is crucial for optimal performance and safety. If you are not confident in your ability to install this product, seek assistance from a qualified professional.

4.1 پورته کول

The ST 450 TRIO is designed for flush mount installation. Choose a mounting location that provides adequate space for the tweeter and its wiring, and ensures it is securely fastened to a stable surface. Avoid locations where the tweeter could be exposed to excessive moisture or direct sunlight.

انځور ۵.۱: اړخ view of the JBL ST 450 TRIO Super Tweeter, illustrating its flush mount design and connection terminals.

4.2 تارونه

The tweeter has a rated impedance of 8 Ohms. Connect the tweeter to an appropriate amplifier output, ensuring that the amplifier can handle an 8-Ohm load. Pay close attention to polarity (+ and -) to ensure correct phase alignment with other speakers in your system. Incorrect polarity can lead to reduced sound quality.

انځور ۱.۱: زاویه لرونکی view of the JBL ST 450 TRIO Super Tweeter, highlighting the robust magnet structure and clearly marked connection points for wiring.

It is recommended to use a high-pass filter to protect the tweeter from low frequencies, which can cause damage. Refer to your amplifier or crossover unit's manual for proper filter settings. The system frequency response for this tweeter is 4000 to 20000 Hz.

5. عملیاتي لارښوونې

Once installed and wired correctly, the JBL ST 450 TRIO Super Tweeter is ready for operation.

• د بریښنا اداره کول: The tweeter has an RMS Power of 300W and a Peak Power of 600W. Ensure that the amplifier's output power does not exceed these limits to prevent damage.
• د حجم کنټرول: Start with a low volume level and gradually increase it to your desired listening level. Avoid operating the system at excessively high volumes for extended periods.
• د غږ سمون: Use your audio system's equalizer or tone controls to fine-tune the high-frequency output to your preference. Remember that the tweeter is designed to reproduce high frequencies, so excessive boosting of treble may lead to harsh sound or potential damage.

6. ساتنه

The JBL ST 450 TRIO Super Tweeter requires minimal maintenance to ensure long-lasting performance.

• پاکول: Use a soft, dry cloth to gently wipe the surface of the tweeter. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
• معاینه: Periodically check the wiring connections to ensure they remain secure. Inspect the tweeter for any signs of physical damage.

7. ستونزه حل کول

If you experience issues with your JBL ST 450 TRIO Super Tweeter, refer to the following common problems and solutions:

• غږ نشته:
  • د ټولو تارونو اړیکې چیک کړئ amplifier to the tweeter for proper contact and polarity.
  • ډاډ ترلاسه کړئ ampلایفیر فعال دی او په سمه توګه کار کوي.
  • Verify that the audio source is playing and the volume is turned up.
• تحریف شوی غږ:
  • د غږ کچه کمه کړئ. تحریف اکثرا هغه وخت پیښیږي کله چې amplifier or tweeter is overdriven.
  • Check for proper high-pass filter settings to prevent low frequencies from reaching the tweeter.
  • Inspect the tweeter for any physical damage to the diaphragm.
• موقتي غږ:
  • Check for loose wiring connections at both the tweeter and the ampلايف
  • Ensure there are no shorts in the wiring.

If these steps do not resolve the issue, contact customer support or a qualified service technician.

8. مشخصات

انځور ۴.۱: پورته view of the JBL ST 450 TRIO Super Tweeter, displaying the brand and model details.

9. تضمین او ملاتړ

This JBL product comes with a limited warranty. Please refer to the included Warranty Leaflet for detailed terms and conditions regarding coverage, duration, and claims procedures.

For technical support, service, or further inquiries, please visit the official JBL webسایټ ته مراجعه وکړئ یا د دوی د پیرودونکو خدماتو څانګې سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.