د ګرانډسټریم HT812 2-پورټ انلاګ ټیلیفون اډاپټر د ګیګابایټ NAT روټر کارونکي لارښود سره

1. پیژندنه

The Grandstream HT812 is a powerful 2-port Analog Telephone Adapter (ATA) designed for users seeking to convert traditional analog phones into Voice over IP (VoIP) devices. It features two FXS ports for connecting analog telephones and dual Gigabit Ethernet ports, including a built-in NAT router capable of handling routing speeds up to 100Mbps. This device supports 2 SIP profiles and incorporates advanced security encryption technologies like TLS and SRTP to protect calls and accounts, ensuring secure and reliable communication.

This manual provides detailed instructions for the proper installation, configuration, and operation of your HT812 device.

2. د بسته محتويات

مهرباني وکړئ تصدیق کړئ چې ستاسو کڅوړه لاندې توکي لري:

• Grandstream HT812 Analog Telephone Adapter
• د یونیورسل بریښنا اډاپټر
• ایترنیټ کیبل
• Quick Installation Guide (This document serves as the comprehensive user manual)

۳. فزیکي اوورview

Familiarize yourself with the ports and indicators on the HT812 device.

شکل 1: مخکی view of the Grandstream HT812, showing the power, phone line 1, phone line 2, internet, and LAN indicator lights.

شکل 2: شاته view of the Grandstream HT812, displaying the power input, reset button, two LAN ports (blue), and two FXS phone ports (green).

شکل 3: زاویه view of the Grandstream HT812, showcasing its compact design and port layout from a side perspective.

4. ترتیب او نصب کول

4.1 Connecting the HT812

1. د ایترنیټ کیبل سره وصل کړئ:
   • Connect the blue LAN port on the HT812 to your internet router or switch using an Ethernet cable.
   • If using the HT812 as a router, connect your modem to the blue WAN port and your local network devices to the blue LAN port.
2. Connect Analog Phones:
   • Connect your analog telephone(s) to the green FXS ports (labeled 1 and 2) on the HT812 using standard RJ11 phone cables.
3. بریښنا وصل کړئ:
   • Connect the power adapter to the DC 12V power input on the HT812 and then plug it into a power outlet.
   • The power indicator light on the front panel should illuminate.

4.2 ته لاسرسی Web د سازونې برسیر

To configure the HT812, you need to access its web انٹرفیس:

1. Determine the IP Address:
   • Connect an analog phone to FXS port 1.
   • ډایل کړئ *** (three asterisks) to access the IVR menu.
   • When prompted, dial 02 to hear the device's current IP address.
   • Alternatively, check your router's DHCP client list for a device named "Grandstream" or by its MAC address (found on the bottom of the HT812).
2. ننوتل:
   • خلاص a web browser on a computer connected to the same network as the HT812.
   • Enter the IP address obtained in step 1 into the browser's address bar (e.g., http://192.168.1.100).
   • اصلي کارن نوم دی اډمین او ډیفالټ پاسورډ دی اډمین (or found on the physical device label).

4.3 د فرم ویئر تازه کول

It is highly recommended to update the device firmware to the latest version for optimal performance and security.

1. ته ننوتل web د تنظیم کولو انٹرفیس.
2. ته لاړشئ Maintenance > Upgrade and Provisioning.
3. Set "Upgrade Via" to HTTP.
4. ننوتل firmware.grandstream.com in the "Firmware Server Path" field.
5. کلیک وکړئ درخواست وکړئ د پاڼې په پای کې.
6. وسیله له دې څخه ریبوټ کړئ web انٹرفیس (Maintenance > Reboot) or by power cycling. The device will download and install the latest firmware. This process may take several minutes.

4.4 SIP Account Configuration

To make and receive calls, you need to configure your SIP account details provided by your VoIP service provider.

1. ته ننوتل web د تنظیم کولو انٹرفیس.
2. ته لاړشئ پروfile 1 (or the relevant profile for your service).
3. Configure the following settings based on your VoIP provider's information:
   • Primary SIP Server: Enter your provider's SIP server address (e.g., sip.yourprovider.com).
   • د SIP کارن نوم: Your SIP username or phone number.
   • د هویت تصدیق: Your SIP authentication ID (often the same as SIP User ID).
   • رمز: Your SIP account password.
   • Ensure "SIP Registration" is set to هو.
4. کلیک وکړئ درخواست وکړئ او بیا ریبوټ وسیله
5. After reboot, check the phone line indicator lights on the front panel. A solid blue light indicates successful SIP registration.

5. عملیاتي لارښوونې

5.1 تلیفونونه کول او ترلاسه کول

Once your SIP account is registered, you can use your analog phone connected to the HT812 just like a regular phone line.

• تلیفون کول: Pick up the handset, wait for a dial tone, and dial the desired phone number.
• د تلیفون ترلاسه کول: When the phone rings, pick up the handset to answer.

5.2 NAT Router Functionality

The HT812 includes a built-in NAT router. When connected to your modem, it can provide network access to other devices connected to its LAN port. This functionality allows for efficient network management and can handle routing speeds up to 100Mbps.

5.3 امنیت ب Featuresې

The HT812 supports advanced security protocols to protect your communications:

• TLS (Transport Layer Security): Encrypts SIP signaling to prevent eavesdropping and tampد.
• SRTP (Secure Real-time Transport Protocol): Encrypts the voice data itself, ensuring privacy during calls.

These features can be configured within the web interface under the relevant SIP profile ترتیبات.

6. ساتنه

6.1 د فرم ویئر تازه معلومات

Regularly checking for and applying firmware updates is crucial for maintaining the security, stability, and performance of your HT812. Refer to section 4.3 for detailed instructions on how to update the firmware.

6.2 وسیله پاملرنه

• وسیله په یخ او وچ ځای کې وساتئ، د مستقیم لمر وړانګو او ډیرې تودوخې څخه لرې.
• د وسیلې د اوبو یا رطوبت له افشا کولو څخه ډډه وکړئ.
• وسیله د نرم او وچ ټوکر سره پاکه کړئ. د مایع یا ایروسول پاکوونکو څخه کار مه اخلئ.

7. ستونزه حل کول

This section addresses common issues you might encounter with your Grandstream HT812.

۷.۱ د ډایل ټون نشته

• ځواک چیک کړئ: Ensure the power adapter is securely connected and the power indicator light on the HT812 is on.
• Check Phone Connection: Verify that the analog phone is correctly plugged into one of the green FXS ports.
• Check SIP Registration: The phone line indicator light for the connected port should be solid blue. If it's off or blinking, the SIP account may not be registered. Review your SIP configuration in the web interface (Section 4.4).
• د شبکې ارتباط: Ensure the HT812 is connected to the internet and has a valid IP address. Check the internet indicator light.

۶.۲ زنګونه نشي وهلی یا یې نه شي ترلاسه کولی

• SIP Registration: Confirm that your SIP account is successfully registered (solid blue phone line indicator).
• د انټرنیټ پیوستون: Verify that your internet connection is active and stable.
• Firewall/NAT Issues: If you are behind a firewall, ensure that the necessary VoIP ports (typically UDP 5060 for SIP and UDP 10000-20000 for RTP) are open or that NAT traversal settings are correctly configured in the HT812 web انٹرفیس
• Dial Plan: Check the dial plan configuration in the web interface to ensure it matches your dialing habits and service provider requirements.

7.3 Web انٹرفیس لاسرسی نه لري

• IP پته: Reconfirm the HT812's IP address using the IVR menu (dial ***۱۷۰ from a connected phone) or your router's DHCP client list.
• د شبکې پیوستون: Ensure your computer is on the same local network as the HT812.
• ډیفالټ اسناد: If you forgot your password, you might need to perform a factory reset (see Section 7.4).

7.4 د فابریکې ری سیٹ

A factory reset will restore all settings to their default values. This should be a last resort for troubleshooting.

1. With the HT812 powered on, use a paperclip or a similar pointed object to press and hold the RESET button (located on the rear panel, see Figure 2) for approximately 7 seconds.
2. Release the button when the indicator lights start to flash rapidly.
3. The device will reboot with factory default settings. You will need to reconfigure all settings, including SIP accounts and network parameters.

8. مشخصات

9. تضمین او ملاتړ

9.1 د محصول تضمین

Grandstream products are covered by a limited warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official Grandstream webسایټ

9.2 تخنیکي ملاتړ

If you encounter issues that cannot be resolved using the troubleshooting steps in this manual, please contact Grandstream technical support. You can find support resources, FAQs, and contact information on the official Grandstream webسایټ: www.grandstream.com/support.