1. پیژندنه
This manual provides essential information for the proper installation, maintenance, and care of your Puig 7692C Carbon Look Windshield. Designed specifically for Kawasaki Z1000 motorcycles from 2014 to 2017, this product enhances the aesthetic and aerodynamic profile of your vehicle. Please read these instructions thoroughly before proceeding with installation or use.
2. محصول ختم شوview
The Puig 7692C Carbon Look Windshield is crafted from high-impact acrylic, offering both strength and flexibility. Its 3mm thickness is engineered to absorb vibrations at high speeds and provide resistance against cracking or scratching. The design is developed through wind tunnel testing to optimize aerodynamic performance and rider comfort.
Image 2.1: Individual components of the Puig 7692C Carbon Look Windshield.
کلیدي ځانګړتیاوې:
- مواد: High-impact acrylic for durability and flexibility.
- ضخامت: 3mm, designed to reduce vibration and resist damage.
- ډیزاین: Aerodynamically optimized through wind tunnel testing.
- پای: Carbon Look for enhanced aesthetic appeal.
3. د خوندیتوب معلومات
د نصب او عملیاتو پرمهال تل خوندیتوب ته لومړیتوب ورکړئ. د دې لارښوونو په تعقیب کې پاتې راتلل ممکن محصول یا موټرسایکل ته زیان یا زیان ورسوي.
- د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې موټرسایکل مستحکم او په خوندي ډول ملاتړ شوی.
- مناسب شخصي محافظتي تجهیزات واغوندئ، لکه دستکشې او د سترګو محافظت.
- Do not overtighten fasteners, as this can damage the windshield or mounting points.
- Verify all components are correctly installed and secure before operating the motorcycle.
- که تاسو د نصبولو پروسې د کوم ګام په اړه ډاډه نه یاست، نو د موټرسایکل یو وړ میخانیک سره مشوره وکړئ.
4. د بسته محتويات
مهرباني وکړئ د نصبولو دمخه تصدیق کړئ چې ټولې برخې شتون لري او زیانمن شوي ندي.
- Puig 7692C Carbon Look Windshield (Main Body)
- Mounting Hardware Kit (screws, washers, spacers, brackets as applicable)
- د نصبولو لارښوونې (دا سند)
5. ترتیب او نصب کول
The following steps outline the general procedure for installing the Puig 7692C Windshield. Specific details may vary slightly depending on your motorcycle's exact configuration. Refer to your motorcycle's service manual for specific torque specifications if available.
- موټرسایکل چمتو کړئ: موټرسایکل په یوه هواره سطحه ودروئ او ډاډ ترلاسه کړئ چې مستحکم دی. انجن بند کړئ او د اور لګېدو کیلي لرې کړئ.
- د نصب کولو نقطې وپیژنئ: Locate the designated mounting points on your Kawasaki Z1000 (2014-2017) for the windshield. These are typically around the headlight or instrument cluster area.
- Attach Brackets (if applicable): If separate mounting brackets are provided, attach them to the motorcycle using the specified hardware. Do not fully tighten at this stage.
- Position the Windshield: Carefully align the Puig windshield with the mounting brackets or direct mounting points.
- Secure the Windshield: Insert the provided screws and fasteners through the windshield and into the mounting points or brackets. Hand-tighten all fasteners initially.
- سمون کول: Once all fasteners are in place, adjust the windshield for optimal alignment and fitment.
- وروستی کلکوالی: Systematically tighten all fasteners to the manufacturer's recommended torque specifications. Avoid overtightening.
- وروستۍ معاینه: Double-check all connections to ensure they are secure and that the windshield is firmly attached without any play.
Image 5.1: Puig 7692C Windshield installed on a Kawasaki Z1000.
انځور ۲: تفصیلي view of the Puig 7692C Windshield mounting area on a Kawasaki Z1000.
6. ساتنه
Proper care will extend the life and maintain the appearance of your Puig windshield.
- پاکول: Use a soft cloth and mild soap with water to clean the windshield. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the acrylic surface.
- وچول: Dry with a clean, soft microfiber cloth to prevent water spots and scratches.
- معاینه: Periodically check all mounting hardware for tightness. Vibrations during riding can cause fasteners to loosen over time.
- تاوان: If the windshield sustains significant damage (cracks, deep scratches), consider replacement to maintain structural integrity and clear visibility.
7. ستونزه حل کول
دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو ورسره مخ کیدی شئ.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| ډیر وایبریشن | Loose mounting hardware. Incorrect installation. | Check and tighten all mounting screws. Ensure all components are correctly seated. |
| Poor Fitment | Incorrect model application. Misaligned components. | Verify the windshield is the correct model (7692C) for your Kawasaki Z1000 (2014-2017). Re-align and re-install components carefully. |
| Scratches/Hazing | Improper cleaning methods. Abrasive materials used. | Use only soft cloths and mild soap for cleaning. Avoid dry wiping or harsh chemicals. Minor scratches may be polished with specialized acrylic polish. |
8. مشخصات
| صفت | تفصیل |
|---|---|
| د ماډل شمیره | 7692C |
| برانډ | پویګ |
| مواد | High-impact Acrylic |
| رنګ | Carbon Look |
| موټی | 3mm |
| مطابقت لرونکی موټر | Kawasaki Z1000 (2014-2017) |
| د توکي وزن | ۲.۴۵ پونډه |
| د محصول ابعاد | 22 x 18 x 10 انچه |
9. تضمین او ملاتړ
For information regarding product warranty, please refer to the official Puig website or contact your authorized Puig dealer. Warranty terms and conditions may vary by region and retailer.
For technical support or further inquiries, please visit the official Puig website or contact their customer service department. You may also refer to the seller from whom you purchased this product.
د پوګ رسمي Webسایټ: www.puig.tv
