1. محصول ختم شوview
The Legrand 138074 is a manual call point designed for fire alarm systems. It features a white housing, two contacts, and an integrated LED indicator. This device allows for manual activation of a fire alarm in emergency situations, providing a clear visual and tactile indication of activation.
شکل 1: مخکی view of the Legrand 138074 Manual Call Point.
2. د خوندیتوب معلومات
مهرباني وکړئ د دې وسیلې نصبولو یا چلولو دمخه د خوندیتوب ټولې لارښوونې ولولئ او پوه شئ. د دې لارښوونو په تعقیب کې پاتې راتلل ممکن د ملکیت زیان، ټپي کیدو یا مړینې لامل شي.
- مسلکي نصب کول: Installation must be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
- د بریښنا قطع کول: Always disconnect power to the circuit before performing any installation, maintenance, or troubleshooting.
- والیtage چک کول: ډاډ ترلاسه کړئ چې د بریښنا رسولو حجمtage د وسیلې ځانګړتیاو سره سمون خوري.
- د چاپیریال شرایط: Do not install in areas with excessive moisture, extreme temperatures, or corrosive environments.
- د اجزاو بشپړتیا: وسیله مه کاروئ که چیرې کومه برخه زیانمنه وي.
3. د بسته محتويات
د بسته بندۍ پرانستلو پر مهال ډاډ ترلاسه کړئ چې ټولې برخې شتون لري او زیانمنې شوې نه دي:
- Legrand 138074 Manual Call Point (1 unit)
- د نصبولو پیچونه (د چمتو شوي مقدار سره سم)
- د لارښود لارښود (دا سند)
4. ترتیب او نصب کول
The Legrand 138074 Manual Call Point is designed for surface or flush mounting. Ensure the chosen location complies with local fire safety regulations regarding accessibility and visibility.
4.1. پورته کول
- د پورته کولو سطح چمتو کړئ: Ensure the surface is clean, dry, and flat.
- د نښه کولو د برمه کولو ځایونه: Use the call point's base as a template to mark the positions for mounting screws.
- سوراخونه: Drill pilot holes appropriate for the mounting screws.
- اساس خوندي کړئ: Attach the call point's base securely to the wall using the provided screws.
4.2. وایرول
Refer to the wiring diagram below and your fire alarm control panel's documentation for correct connection. This device features 2 contacts and an LED indicator.
- Connect the alarm circuit wires to the designated terminals (typically NO/NC contacts).
- Connect the LED indicator wires to the appropriate power source and signaling circuit as per your system's requirements.
- ډاډ ترلاسه کړئ چې ټولې اړیکې خوندي او په سمه توګه موصل شوي دي.
شکل 2: داخلي view and wiring terminals of the Legrand 138074 Manual Call Point.
4.3. وروستۍ مجلس
- Carefully place the front cover onto the mounted base, ensuring all wires are tucked away and not pinched.
- Secure the cover with any retaining screws or clips provided.
- Restore power to the circuit and test the device according to your fire alarm system's testing procedures.
5. عملیاتي لارښوونې
In the event of a fire or other emergency requiring immediate alarm activation:
- Locate the Call Point: Identify the nearest Legrand 138074 Manual Call Point.
- الارم فعال کړئ: Firmly press the designated activation area on the call point. This action will typically break a frangible element or activate a switch.
- Verify Activation: The integrated LED indicator should illuminate, confirming that the call point has been activated and the signal sent to the fire alarm control panel.
- تخلیه: Follow your building's emergency evacuation procedures.
Note: Resetting the call point typically requires a special key or tool to return the activation mechanism to its original state after an alarm. Consult your fire alarm system administrator for reset procedures.
6. ساتنه
Regular maintenance ensures the reliable operation of your manual call point.
- بصری معاینه: Periodically inspect the call point for any signs of physical damage, tampering, or obstruction. Ensure the LED is functional during system tests.
- پاکول: Clean the exterior of the call point with a soft, damp ټوکر د کثافاتو پاکوونکي یا محلول مه کاروئ.
- فعاله ازموینه: Conduct regular functional tests as required by local fire safety regulations and your fire alarm system's maintenance schedule. This should be performed by qualified personnel.
- د اجزاو بدلول: If the frangible element is broken or the device is damaged, it must be replaced by a qualified technician.
7. ستونزه حل کول
If you encounter issues with your Legrand 138074 Manual Call Point, refer to the table below. For problems not listed, contact qualified service personnel.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| LED not illuminating upon activation | Incorrect wiring for LED; LED faulty; No power to LED circuit. | Check LED wiring connections; Test LED circuit for power; Replace call point if LED is faulty. |
| Alarm not activating when call point is pressed | Incorrect wiring for contacts; Contacts faulty; Issue with fire alarm control panel. | Verify contact wiring; Test continuity of contacts; Consult fire alarm control panel manual or technician. |
| Call point appears damaged | Physical impact; Vandalism. | Replace the damaged call point immediately. |
8. مشخصات
| فیچر | تفصیل |
|---|---|
| جوړونکی | Legrand |
| د ماډل شمیره | 138074 |
| د محصول ډول | لاسي زاړه ټکی |
| رنګ | سپین |
| اړیکې | 2 اړیکې |
| شاخص | مدغم LED |
| د محصول وزن | 0.05 ګرامه |
| ASIN | B018PB4SP8 |
| د لومړي شتون نیټه | 19 می 2016 |
9. د تضمین معلومات
Legrand products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product type. Please retain your proof of purchase. For detailed warranty information, refer to the official Legrand website or contact Legrand customer support in your region.
۱۰. ملاتړ او اړیکه
For technical assistance, product inquiries, or to report issues, please contact Legrand customer support. You can find contact information, including phone numbers and online support portals, on the official Legrand webسایټ:
کله چې د ملاتړ سره اړیکه ونیسئ، مهرباني وکړئ د خپل محصول ماډل شمیره (138074) او د پیرود اړوند ټول توضیحات چمتو ولرئ.
