ایلنا / ریکار د ګنډلو ماشین د ښکته شافټ ګیر 30182 لارښوونې لارښود

پیژندنه

This instruction manual provides essential information regarding the Elna / Riccar Sewing Machine Lower Shaft Gear, part number 30182. It covers product identification, compatibility, installation guidelines, operational principles, maintenance, and troubleshooting. Please read this manual thoroughly before attempting installation or maintenance to ensure proper function and safety.

Product Description and Compatibility

The 30182 gear is a crucial component designed for the lower shaft of specific Elna and Riccar sewing machine models. This gear facilitates the synchronized movement of various machine parts, essential for proper stitching operations.

• برخه شمیره: 30182
• Compatible Sewing Machine Models:
  • Riccar REC6000
  • Elna 300
  • Elna 1500
  • Elna 1600
  • Elna 150

Image 1: The Elna / Riccar Sewing Machine Lower Shaft Gear, part number 30182. This image displays the gear with its helical teeth and brass-colored central shaft, designed for precise mechanical function within compatible sewing machines.

د نصبولو لارښوونې

Installation of internal sewing machine components requires technical knowledge and precision. Incorrect installation can lead to machine malfunction or damage. It is recommended that this part be installed by a qualified sewing machine technician.

1. لومړی خوندیتوب: Always unplug the sewing machine from the power outlet before beginning any installation or maintenance.
2. Access the Lower Shaft: Carefully open the sewing machine casing to gain access to the lower shaft assembly where the gear is located. Refer to your specific sewing machine model's service manual for detailed instructions on accessing internal components.
3. زوړ وسایل لرې کړئ: Identify the worn or damaged gear. Note its orientation and position. Use appropriate tools to carefully remove the old gear, ensuring no other components are damaged.
4. نوی ګیر نصب کړئ: Position the new 30182 gear onto the lower shaft, ensuring it aligns correctly with mating gears and is seated securely. The orientation must match the original gear.
5. خوندي برخې: Fasten any retaining clips, screws, or pins that hold the gear in place.
6. د ازموینې فعالیت: Before reassembling the casing, manually rotate the handwheel to check for smooth movement and proper engagement of the new gear with other components.
7. بیا یوځای کول: Carefully reassemble the sewing machine casing, ensuring all screws are tightened and panels are correctly aligned.

یادونه: If you are unsure about any step, consult a professional sewing machine repair service.

عملیاتي اصول

The lower shaft gear is integral to the mechanical timing of your sewing machine. It transmits power from the motor to various mechanisms, including the feed dog and bobbin assembly, ensuring that stitches are formed correctly and consistently. Proper functioning of this gear is critical for the machine's overall performance, contributing to smooth fabric feeding and precise needle-to-hook timing.

ساتنه

Regular maintenance helps extend the life of your sewing machine and its components, including the lower shaft gear.

• معاینه: Periodically inspect the gear for signs of wear, such as chipped teeth, cracks, or excessive play. This typically requires opening the machine casing.
• غوړول: Apply a small amount of high-quality sewing machine grease to the gear teeth as recommended by your sewing machine's manufacturer. Avoid over-lubrication, which can attract lint and dust.
• پاکول: Keep the area around the gear free from lint, dust, and thread fragments, which can impede its movement and cause premature wear. Use a small brush or compressed air for cleaning.

د ستونزو حل کول

If your sewing machine exhibits any of the following symptoms, the lower shaft gear may be worn or damaged:

• غیر معمولي غږونه: Grinding, clicking, or squealing sounds coming from the machine's interior, especially when the machine is operating.
• Machine Not Moving: The needle bar or feed dogs do not move, or move erratically, even though the motor is running.
• پریښودل شوي ګنډونه یا د ګنډلو خراب کیفیت: Incorrect timing caused by a worn gear can lead to inconsistent stitch formation.
• د ماشین بندول: The machine frequently jams or locks up during operation.

If you suspect the gear is faulty, discontinue use and consult a qualified technician for diagnosis and repair.

مشخصات

تضمین او ملاتړ

Information regarding the specific warranty for the Elna / Riccar Sewing Machine Lower Shaft Gear 30182 is not provided in the product details. For warranty inquiries or technical support, please contact the original seller or the manufacturer directly. Ensure you have your purchase details and the part number (30182) available when contacting support.