Casio Black Resin Watch Strap Instruction Manual

1. پیژندنه

This document provides instructions for the installation, care, and maintenance of your genuine Casio Black Resin Watch Strap. This strap is designed as a direct replacement for specific Casio watch models, ensuring a secure and comfortable fit. It is crafted from high-quality resin material, known for its durability and flexibility.

2. مطابقت

This replacement watch strap is specifically designed for the following Casio watch models:

• SGW-400H-1BVH
• SGW-300H-1AVH

Please verify your watch's model number, typically found on the back casing, to ensure compatibility.

3. د بسته محتويات

په بسته کې شامل دي:

• One (1) Casio Black Resin Watch Strap (two pieces)

Note: This product does not include spring bars (pins) or any other attachment hardware. You will need to reuse the existing spring bars from your original watch strap.

4. د نصب لارښود

Replacing your watch strap requires careful handling to avoid damage to your watch or the new strap. If you are unsure about any step, it is recommended to seek assistance from a professional watch technician.

4.1. اړین وسایل

• Spring bar tool (recommended) or a small, flat-head screwdriver
• Soft cloth or protective surface

4.2. Removing the Old Strap

1. Place your watch face down on a soft, clean cloth to prevent scratches.
2. Locate the spring bars that secure the strap to the watch lugs. These are small, spring-loaded pins.
3. Using a spring bar tool or a small screwdriver, gently compress one end of the spring bar and carefully pull the strap away from the watch lug.
4. Once one end is free, the spring bar can be removed. Repeat this process for the other side of the strap.
5. Keep the removed spring bars in a safe place, as they will be needed for the new strap.

4.3. Attaching the New Strap

The new strap consists of two pieces. Ensure you attach the longer piece (with more holes) to the 12 o'clock position and the shorter piece (with the buckle) to the 6 o'clock position.

1. Insert one end of a spring bar into one of the holes on the inside of a new strap piece.
2. Place the spring bar into one of the watch lugs, ensuring one end of the spring bar is seated in the lug hole.
3. Using the spring bar tool, compress the exposed end of the spring bar and guide it into the corresponding hole on the opposite side of the watch lug.
4. Gently tug on the strap to ensure both ends of the spring bar are securely seated in the lug holes. A slight click may be heard.
5. Repeat this process for the second piece of the strap.

Figure 1: The two pieces of the Casio Black Resin Watch Strap, ready for installation.

Figure 2: Detail of the strap ends, showing the design and where the spring bars are inserted.

Figure 3: Diagram for measuring lug width (a) and overall strap width (b) for proper fitment.

۵. کارول او سمون

Once installed, the strap can be adjusted to fit your wrist comfortably using the tang buckle. Insert the pin of the buckle into one of the strap holes that provides a snug yet comfortable fit. Ensure the strap is not too tight, which could restrict circulation, or too loose, which could cause the watch to move excessively.

6. ساتنه او پالنه

To ensure the longevity and appearance of your Casio resin watch strap, follow these care guidelines:

• پاکول: تسمه په منظم ډول د نرم، دamp cloth to remove dirt, sweat, and oils. For more thorough cleaning, use mild soap and water, then rinse thoroughly and air dry.
• د سختو کیمیاوي موادو څخه ډډه وکړئ: Do not expose the strap to strong chemicals, solvents, or abrasive cleaners, as these can damage the resin material.
• ذخیره کول: Store your watch in a cool, dry place away from direct sunlight when not in use. Prolonged exposure to direct sunlight can cause the resin to degrade or discolor over time.
• د سختې تودوخې څخه ډډه وکړئ: While resin is durable, extreme hot or cold temperatures can affect its flexibility and lifespan.

7. ستونزه حل کول

7.1. Strap Does Not Fit

• مطابقت چیک کړئ: Double-check your watch's model number against the compatible models listed in Section 2.
• Verify Spring Bars: Ensure you are using the correct size and type of spring bars for your watch. The original spring bars are typically the best fit.
• مناسب سمون: Make sure the spring bar ends are correctly aligned with the lug holes before attempting to push them in.

7.2. Difficulty Installing Spring Bars

• سمه وسیله وکاروئ: A dedicated spring bar tool makes installation significantly easier and reduces the risk of scratching.
• نرم فشار ورکړئ: Do not force the spring bar. If it's not going in smoothly, re-evaluate the alignment and ensure the spring bar is fully compressed.

8. مشخصات

Figure 4: The watch strap measured for length.

9. ملاتړ

For further assistance, questions regarding your Casio watch strap, or if you encounter issues not covered in this manual, please contact Casio customer support or visit the official Casio webد خدماتو معلوماتو لپاره سایټ.