1. پیژندنه
This manual provides detailed instructions for the installation, operation, and maintenance of the Eaton Accell AIM06-A-K Smart Dimmer. This device is designed for smooth, full-range digital dimming of incandescent, magnetic low-voltage, and fluorescent lighting. Please read these instructions carefully before installation and use.
Image 1.1: Eaton Accell AIM06-A-K Smart Dimmer in Almond. This image shows the front view of the dimmer switch, highlighting its push pad and dim/bright bar.
2. د خوندیتوب معلومات
خبرداری: د اور، شاک یا مرګ څخه د مخنیوي لپاره، د سرکټ بریکر یا فیوز بکس کې بریښنا بنده کړئ او د تار لګولو دمخه ازموینه وکړئ چې بریښنا بنده ده.
- نصب کول باید د ټولو محلي او ملي بریښنایی کوډونو سره سم د وړ بریښنایی متخصص لخوا ترسره شي.
- Do not use with loads exceeding 600 Watts for incandescent/halogen or magnetic low-voltage رڼا اچول.
- ډاډ ترلاسه کړئ چې د تار ټولې اړیکې خوندي دي.
- دا وسیله یوازې د داخلي کارونې لپاره ده.
- Do not attempt to repair or modify the device. Refer servicing to qualified personnel.
3. د بسته محتويات
د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:
- Eaton Accell AIM06-A-K Smart Dimmer (Almond)
- Wire Nuts (typically included for connections)
- د لارښود لارښود (دا سند)
4. کلیدي ځانګړتیاوې
- Single-pole and multi-location smart dimmer functionality.
- Smooth, full-range digital dimming for incandescent, magnetic low-voltage, and fluorescent lighting.
- Electro-mechanical push pad for ON/OFF operation with a separate dim/bright bar.
- Preset feature allows return to the previous light setting.
- LED light level display for presetting illumination levels.
- Amber LED at the bottom indicates ON/OFF load status.
- Seven-step green LED display indicates selected light level and reduces brightness when off (night light feature).
- Digital circuitry provides soft-on/fade-off, extending lamp ژوند
- Neutral wire is not required for installation.
- Compatible with any decorator designer-style wallplates.
5. نصب کول
- د بریښنا بندول: At the circuit breaker or fuse box, turn off the power to the switch location. Verify power is off using a voltage ټیسټر.
- زوړ سویچ لرې کړئ: Carefully remove the existing wallplate and switch from the wall box. Disconnect the wires from the old switch.
- د تارونو پیژندنه:
- د کرښې تار: The wire bringing power from the circuit breaker.
- د بار تار: هغه تار چې د رڼا فکسچر ته ځي.
- ځمکني تار: Bare copper or green insulated wire.
- Traveler Wires (for multi-location): If replacing a 3-way or 4-way switch, identify the traveler wires.
- ډیمر تار کړئ: Connect the wires to the dimmer according to the wiring diagram provided with the product.
- Connect the Line wire to the dimmer's Line terminal.
- Connect the Load wire to the dimmer's Load terminal.
- Connect the Ground wire to the dimmer's Ground terminal.
- For multi-location installations, connect traveler wires as per the specific diagram for your setup.
یادونه: The AIM06-A-K dimmer does not require a neutral wire for installation.
- ډیمر نصب کړئ: Carefully fold the wires into the wall box and secure the dimmer to the wall box using the provided screws.
- وال پلیټ نصب کړئ: Attach a decorator-style wallplate (sold separately) over the dimmer.
- د بریښنا بیرته راګرځول: په سرکټ بریکر کې بریښنا بیرته فعاله کړئ.
- د ازموینې عملیات: Test the dimmer's ON/OFF function and dimming capabilities.
6. عملیات
- آن/بندول: Press the large electro-mechanical push pad to turn the lights ON or OFF.
- Dimming/Brightening: Use the separate dim/bright bar located next to the push pad. Press the top of the bar to brighten lights, and the bottom to dim lights.
- Preset Feature: When turning the lights ON, the dimmer will return to the last set brightness level.
- LED Light Level Display: The seven-step green LED display indicates the current light level. When the lights are off, these LEDs reduce brightness, acting as a night light.
- Load Status Indicator: An amber LED at the bottom of the LED display indicates the ON/OFF status of the load.
7. ساتنه
- پاکول: د ډیمر پاکولو لپاره، د نرم، d سره مسح کړئamp ټوکر د کثافاتو پاکوونکي یا محلول مه کاروئ.
- د کارونکي د خدمت وړ برخې نشته: The dimmer contains no user-serviceable parts. Do not attempt to open or repair the unit.
8. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| څراغونه نه روښانه کېږي. |
|
|
| Lights do not dim. |
|
|
| Dimmer is hot to the touch. |
|
|
9. مشخصات
- ماډل: AIM06-A-K
- نښه: ایتون
- ډول: Smart Dimmer, Incandescent/Halogen, Magnetic Low-Voltage
- واټtage: ۸ واټونه ( اعظمي)
- والیtage: 120 وولټ AC، 60 Hz
- د عملیاتو حالت: Push Button with Dim/Bright Bar
- رنګ: بادام
- ابعاد (L x W x H): Approximately 2.27 x 2.27 x 2.27 inches (actual faceplate size may vary)
- تصدیقونه: cULus Listed to UL1472, NOM certified
- د ارتباط پروتوکول: X-10
- بې طرفه تار: Not required for installation
10. تضمین او ملاتړ
For warranty information and technical support, please refer to the official Eaton website or contact Eaton customer service directly. Specific warranty terms may vary by region and purchase date.
