د DSC SS102 د زلزلې وایبریشن سینسر لارښوونې لارښود

1. پیژندنه

The DSC SS102 Seismic Vibration Sensor is designed to detect shock and vibration, providing an essential layer of security for various applications. This manual provides detailed instructions for the proper installation, operation, and maintenance of the SS102 sensor to ensure optimal performance and reliability within your security system.

2. کلیدي ځانګړتیاوې

• Seismic vibration detection for enhanced security.
• Adjustable pulse count for false alarm prevention.
• Integrated LED indicator for status and testing.
• Suitable for indoor shock/vibration detection.
• Surface mount installation.

3. د خوندیتوب معلومات

Please read all instructions carefully before installing or operating the DSC SS102 sensor. Failure to follow these instructions may result in improper operation, damage to the device, or personal injury.

• نصب کول باید یوازې د وړ پرسونل لخوا ترسره شي.
• Disconnect power to the control panel before performing any wiring or maintenance.
• Ensure all wiring connections are secure and correct according to the control panel's specifications.
• Do not expose the sensor to extreme temperatures or moisture beyond its specified operating conditions.
• دا وسیله یوازې د داخلي کارونې لپاره ده.

4. نصب او تنظیم کول

Proper installation is crucial for the optimal performance of the SS102 sensor. Follow these steps carefully:

4.1 پورته موقعیت

• Select a solid, stable surface that is directly connected to the area you wish to protect (e.g., a wall, window frame, or safe).
• Avoid mounting on surfaces that are prone to excessive vibration from non-security related sources (e.g., heavy machinery, air conditioning units).
• ډاډ ترلاسه کړئ چې د نصب کولو سطحه پاکه او وچه ده.

4.2 فزیکي نصب کول

1. په احتیاط سره سینسر خلاص کړئ casing to access mounting holes and terminals.
2. Using appropriate screws, securely mount the sensor to the chosen surface. Ensure it is firmly attached to transmit vibrations effectively.
3. Refer to the diagram below for typical mounting orientation and component identification.

شکل 1: DSC SS102 Seismic Vibration Sensor. This image shows the white rectangular sensor unit. Visible on its front face are the "DSC" logo, the word "SHOCKGUARD" embossed vertically, a small adjustment screw, and an LED indicator. The sensor is designed for surface mounting.

4.3 تارونه

Connect the sensor to your alarm control panel according to the panel's instructions and the SS102 wiring terminals. Typically, this involves connecting to a zone input and power supply.

• Identify the alarm output terminals and power input terminals on the SS102.
• Connect the power supply (e.g., 12V DC) to the designated power terminals.
• Connect the alarm output to a supervised zone input on your control panel.
• Ensure proper polarity for power connections.

4.4 Sensitivity and Pulse Count Adjustment

The SS102 features adjustable sensitivity and pulse count to prevent false alarms while ensuring reliable detection.

• د حساسیت سمون: Use a small screwdriver to adjust the sensitivity screw (refer to Figure 1). Turn clockwise to increase sensitivity, counter-clockwise to decrease. Test the sensor after each adjustment.
• د نبض شمیره: The pulse count setting determines how many consecutive shock events are required within a short period to trigger an alarm. This helps differentiate between genuine threats from minor environmental disturbances. Consult your control panel or sensor documentation for specific pulse count settings if available, or adjust based on thorough testing.

5. عملیات

Once installed and configured, the DSC SS102 sensor continuously monitors for seismic vibrations. When the detected vibration level exceeds the set sensitivity threshold for the specified pulse count, the sensor will trigger an alarm condition, signaling the connected control panel.

• د LED شاخص: The integrated LED (refer to Figure 1) provides visual feedback during testing and operation. It typically illuminates briefly upon detection of a shock event, and may indicate an alarm condition depending on the system's configuration.
• ازموینه: Regularly test the sensor by applying controlled impacts to the protected surface (e.g., tapping firmly near the sensor) to ensure it triggers an alarm at the desired sensitivity level.

6. ساتنه

The DSC SS102 sensor requires minimal maintenance to ensure long-term reliability.

• پاکول: Periodically wipe the sensor's exterior with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents, as these may damage the casing یا داخلي برخې.
• ازموینه: Perform functional tests at least annually, or more frequently in high-security applications, to verify proper operation and sensitivity settings.
• د چاپیریال معاینه: Ensure the sensor remains free from moisture, extreme temperatures, and physical damage.

7. ستونزه حل کول

8. مشخصات

9. تضمین او ملاتړ

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized DSC dealer or distributor. Keep your proof of purchase for warranty claims.

For further assistance, visit the official DSC webسایټ یا د دوی د پیرودونکي خدماتو څانګې سره اړیکه ونیسئ.