Schlage SP455A3 Kick Down Door Holder Instruction Manual

1. محصول ختم شوview

The Schlage SP455A3 Kick Down Door Holder is designed to provide a simple and effective method for holding doors open. Constructed from cast aluminum with a bright brass finish, it features a 4-inch arm and a durable rubber foot for secure engagement with the floor surface. This unit is activated and released with a touch of the foot, offering convenient operation.

Figure 1: Schlage SP455A3 Kick Down Door Holder. This image displays the door holder with its 4-inch arm and rubber foot, presented in a bright brass finish.

کلیدي ځانګړتیاوې:

• ساده عملیات: Engage and release the door holder with a foot.
• دوامدار ساختمان: Made from cast aluminum for longevity.
• خوندي ساتل: Features a rubber bottom to prevent slipping.
• Optimal Clearance: Designed for doors with a door-to-floor clearance of 2 inches or less.
• پای: Bright Brass.

2. د بسته محتويات

د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري.

• Schlage SP455A3 Kick Down Door Holder (1 unit)
• د نصبولو هارډویر (پیچونه)

3. د نصبولو لارښوونې

This door holder is designed for door mount installation. Ensure the door-to-floor clearance is 2 inches or less for proper function.

اړین وسایل:

• پنسل
• د اندازه کولو ټیپ
• د مناسب ډرل بټ سره ډرل کړئ (د پیلوټ سوریو لپاره)
• سکریو ډرایور (د فیلیپس سر سپارښتنه کیږي)

د نصبولو مرحلې:

1. د نصب کولو ځای مشخص کړئ: Position the door holder on the lower edge of the door, ensuring it is within reach for foot operation and that the rubber foot will make firm contact with the floor when engaged. The ideal location allows the door to open to the desired angle.
2. د تصفیې چک کول: With the door holder temporarily held in place, ensure that the distance from the bottom of the door to the floor is 2 inches or less. This ensures the rubber foot can effectively engage the floor.
3. د سکرو سوراخ په نښه کړئ: Using a pencil, mark the locations for the mounting screws through the pre-drilled holes on the door holder base.
4. د پیلوټ سوراخ ډرل: Carefully drill pilot holes at the marked locations. Use a drill bit slightly smaller than the screw diameter to prevent wood splitting.
5. Attach Door Holder: Align the door holder with the pilot holes and secure it firmly to the door using the provided mounting screws and a screwdriver. Do not overtighten.
6. د ازموینې عملیات: Once installed, test the door holder by pushing down on the arm with your foot to engage it and lifting it to release.

4. عملیاتي لارښوونې

The Schlage SP455A3 Kick Down Door Holder is designed for simple, foot-activated use.

1. ښکیلتیا: With your foot, gently press down on the top of the door holder's arm until the rubber foot makes firm contact with the floor and the door is held in place.
2. خوشې کول: With your foot, gently lift the arm of the door holder upwards. The rubber foot will disengage from the floor, allowing the door to move freely.

5. ساتنه

Regular maintenance ensures optimal performance and extends the life of your door holder.

• پاکول: Wipe the metal components with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners that may damage the finish.
• Rubber Foot Inspection: Periodically check the rubber foot for wear or damage. A worn rubber foot may reduce the holder's ability to grip the floor. Replacement rubber tips may be available from the manufacturer.
• پیچونه کلک کړئ: If the door holder becomes loose, gently tighten the mounting screws. Do not overtighten.

6. ستونزه حل کول

7. مشخصات

8. تضمین او ملاتړ

For specific warranty information, please refer to the documentation included with your product or visit the official SCHLAGE website. SCHLAGE products are backed by a commitment to quality and durability.

If you require technical assistance or have questions regarding your Schlage SP455A3 Kick Down Door Holder, please contact SCHLAGE customer support. Contact details are typically available on the manufacturer's webسایټ یا د محصول بسته بندي.