د کامفاسټ CF-EW87 بیروني بې سیم AP کارونکي لارښود

1. پیژندنه

The Comfast CF-EW87 is a high-power outdoor Access Point (AP) designed for robust wireless connectivity in various outdoor environments. It features WiFi7 wireless transmission with dual-band speeds up to 3600Mbps, ensuring efficient and stable network performance. Equipped with three high-gain omnidirectional antennas, it provides 360° signal coverage. Its rigorous industrial casing is waterproof, lightning-proof, moisture-proof, and anti-freeze, making it suitable for squares, resorts, scenic spots, and other outdoor locations.

کلیدي ځانګړتیاوې:

• WiFi7 Technology: Latest wireless standard for enhanced fluency and performance.
• لوړ سرعت: Dual-band concurrent speeds up to 3600Mbps (2.4GHz: 688Mbps; 5.8GHz: 2882Mbps).
• ځواکمن فعالیت: Tri-Core Engine (IPQ5312+QCN6412+QCA8337 chip solution) and Four External PAs for strong signal and efficient anti-interference.
• پراخ پوښښ: Detachable three high-gain 5dBi omnidirectional antennas provide 360° network coverage.
• دوامدار ډیزاین: IP66 protective industrial casing, waterproof, lightning-proof, moisture-proof, and anti-freeze.
• انعطاف منونکی ځواک: Supports both POE (48V/0.32A) and DC (12V/1.5A) dual-mode power supply.
• د ګیګابایټ بندرونه: One 10/100/1000Mbps RJ45 WAN port and two 10/100/1000Mbps RJ45 LAN ports.
• د وسیلې لوړ ظرفیت: Can simultaneously connect over 120 terminal devices.
• Intelligent Roaming: Ensures stable and uninterrupted network when devices move within coverage.

2. د بسته محتويات

مهرباني وکړئ تصدیق کړئ چې ټول توکي ستاسو په کڅوړه کې شتون لري:

• 1 x Comfast CF-EW87 WIFI AP Unit
• 1 د شبکې کیبل
• 1 x POE Power Adapter
• د 2 ایکس کیبل اړیکې
• 2 x Waterproof Caps
• 1 x Set of Gaskets and Screws for Installation
• 1 x د نصبولو لارښود

3. مشخصات

4. ترتیب او نصب کول

4.1 فزیکي نصب کول

The CF-EW87 supports both wall-mounted and pole-mounted installations, offering flexibility for various outdoor deployment scenarios.

د بریښنا رسولو نښلول:

The device supports both Power over Ethernet (POE) and DC power supply. Choose the method most suitable for your installation environment.

۲.۳ ابتدايي ترتیب (Web انٹرفیس)

Follow these steps to configure your CF-EW87 using the web interface. A detailed video guide is available below.

Video: CF-EW87 Wireless AP Install & Setup Guide, demonstrating pre-setup, AP, Bridge, Repeater, and Router mode configurations.

Pre-Setup Preparations:

1. بریښنا وصل کړئ: Connect the Ethernet cable to the LAN1 port of the device and the POE power supply. Connect the POE power supply to a power outlet. Wait for the signal light to turn on.
2. کمپیوټر سره وصل کړئ: Connect your computer to the LAN port of the POE power supply using an Ethernet cable.
3. لاسرسی Web انٹرفیس: خلاص a web browser on your computer and enter the default IP address 192.168.10.1 د ادرس بار ته.
4. ننوتل: Enter the default password "admin" to log in to the device's configuration interface.

AP Mode Setup Steps:

1. From the main interface, select "Wizard".
2. Choose "AP" mode.
3. In AP mode, the AP requires an internal IP address that is not the same as the upper router's gateway. To manage the AP, the computer connected to it must have a manual IP in the same segment.
4. Set the wireless SSID, password, and advanced wireless parameters (channel bandwidth, country, channel).
5. Click "Next" and then "Finish" to apply settings.
6. Wait for the settings to take effect. After setup, connect the device's WAN port or the POE power supply's LAN port to the WAN.

Bridge Mode Setup Steps:

1. From the main interface, select "Wizard".
2. Choose "Bridge" mode.
3. The AP can set an internal segment (gateway IP should not match the upstream device's). This mode requires the upstream bridged device to enable WDS.
4. Click "Scan" at the SSID field to find the wireless SSID signal you need to bridge.
5. Enter the bridged wireless password (this is the upstream WiFi's password).
6. Configure the AP's own wireless SSID and password.
7. Click "Next" to complete the setup.
8. Wait for the settings to take effect.

Repeater Mode Setup Steps:

1. From the main interface, select "Wizard".
2. Choose "Repeater" mode.
3. The AP can set an internal segment (gateway IP should not match the upstream device's).
4. Click "Scan" at the SSID field to find the wireless SSID signal you need to relay.
5. Enter the relayed device's password.
6. Set the AP's own wireless SSID and password.
7. Click "Next" to complete the setup.
8. Wait for the settings to take effect.

Router Mode Setup Steps:

1. From the main interface, select "Wizard".
2. Choose "Router" mode.
3. Here offers three internet access methods: PPPOE, Static IP, or DHCP. Select the appropriate method based on your network configuration.
4. Click "Next" for LAN Port Settings.
5. You can set the wireless SSID, password, and advanced wireless parameters like channel bandwidth, country, and channel.
6. Wait for the configuration to complete and take effect.

5. عملیاتي طریقې

The Comfast CF-EW87 supports multiple operating modes to adapt to various network requirements:

• د AP حالت (د لاسرسي نقطه): In this mode, the device acts as a central hub for wireless clients, extending an existing wired network wirelessly. It creates a new wireless network (SSID) for devices to connect to.
• د پل حالت: This mode allows the device to connect two separate wired networks wirelessly. It requires the upstream device to have WDS (Wireless Distribution System) enabled.
• د تکرار حالت: The device extends the range of an existing wireless network by receiving and re-transmitting the signal. It uses the same SSID and password as the main network.
• راوټر حالت: In this mode, the device functions as a router, providing internet access to connected devices. It supports PPPOE, Static IP, and DHCP internet access methods.

6. ساتنه

• منظم پاکول: Periodically clean the exterior of the device to prevent dust and debris buildup, especially in outdoor environments. Use a soft, dry cloth.
• د فرم ویئر تازه معلومات: جوړونکي وګورئ website for the latest firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features.
• د چاپیریال ساتنه: Ensure the device is installed according to its IP66 rating, protecting it from water, dust, and extreme temperatures. Regularly inspect the waterproof caps and cable connections for any signs of wear or damage.
• د انتن چک: Ensure the detachable antennas are securely fastened and free from obstruction.
• د بریښنا دوره: If you experience network issues, try power cycling the device (unplug and replug the power) to resolve temporary glitches.

7. ستونزه حل کول

عام مسایل او حل لارې:

هیڅ بریښنا نشته / وسیله نه چالانیږي:

Ensure the power adapter (POE or DC) is correctly connected to the device and a working power outlet. Check the power indicator light on the device.

لاسرسی نشم کولی Web Interface (192.168.10.1):

Verify your computer's Ethernet connection to the POE adapter's LAN port. Ensure your computer's IP address is in the same subnet as the device (e.g., manually set to 192.168.10.x, where x is not 1). Try a different browser or clear browser cache. Reset the device to factory defaults if necessary (refer to the manual for reset instructions).

Weak or Unstable WiFi Signal:

Check antenna connections and orientation. Ensure there are no major physical obstructions (walls, large metal objects) between the AP and client devices. Adjust the AP's position for optimal coverage. Verify wireless channel settings to avoid interference from other networks.

د انټرنېټ ورو سرعت:

Check the wired connection speed to the AP. Ensure the AP is connected to a high-speed internet source. Verify the operating mode is correctly configured for your network setup. Too many connected devices can also impact performance.

وسیله په مکرر ډول منقطع کیږي:

Check for firmware updates. Ensure the power supply is stable. Review environmental factors that might affect stability (e.g., extreme temperatures, electrical interference).

8. د کارن لارښوونې

• MLO Functionality: The CF-EW87 supports WiFi7 with dual-band concurrent operation. While WiFi7 (802.11be) introduces Multi-Link Operation (MLO) for simultaneous use of multiple bands, specific MLO implementation details can vary. The dual-band concurrent feature already provides efficient anti-interference and stable signals across 2.4GHz and 5.8GHz. For advanced MLO features, ensure your client devices also support MLO and check for specific firmware updates from Comfast.
• غوره ځای پرځای کول: For outdoor use, consider placing the AP in a central location with a clear line of sight to the areas you want to cover. Avoid placing it near large metal structures or dense foliage that can obstruct signals.
• امنیت: Always change the default login password ("admin") for the web interface immediately after initial setup to prevent unauthorized access. Use strong, unique passwords for your WiFi networks.

9. تضمین او ملاتړ

This product comes with a standard manufacturer's warranty. For detailed warranty terms, technical support, or service inquiries, please refer to the official Comfast webسایټ ته مراجعه وکړئ یا د دوی د پیرودونکو خدماتو سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.