HP Pro 490 G1 G2 Desktop Motherboard MS-7933 V1.0 User Manual

1. پیژندنه

This manual provides essential information for the installation, operation, and maintenance of the HP Pro 490 G1 G2 Desktop Motherboard MS-7933 V1.0. This motherboard is designed as a replacement or upgrade component for compatible HP Pro 490 G1 and G2 desktop systems, featuring an LGA1150 socket and supporting DDR3 memory.

2. مشخصات

3. د بسته محتويات

په کڅوړه کې عموما شامل دي:

• HP Pro 490 G1 G2 Desktop Motherboard MS-7933 V1.0 (as pictured)

Note: Additional accessories such as SATA cables, I/O shield, or manuals may not be included unless explicitly stated by the seller.

4. ترتیب او نصب کول

4.1 د خوندیتوب احتیاطونه

• تل د هر ډول اجزاو نصبولو یا لرې کولو دمخه د خپل کمپیوټر څخه د بریښنا رسولو قطع کړئ.
• د جامد بریښنا د خارجولو لپاره د جامد ضد لاس تسمه واغوندئ یا په مکرر ډول د ځمکې لاندې فلزي شی ته لمس وکړئ، کوم چې کولی شي بریښنایی اجزاو ته زیان ورسوي.
• Handle the motherboard by its edges, avoiding contact with components and connectors.
• Ensure you are working in a well-lit and clean environment.

4.2 د مادر بورډ نصب کول

1. قضیه چمتو کړئ: Ensure your computer case is clean and has the necessary standoffs installed for the ATX form factor of this motherboard.
2. د I/O شیلډ نصب کړئ: If a new I/O shield is provided, install it into the rear opening of your computer case.
3. CPU نصب کړئ:
   • Carefully open the CPU socket retention arm.
   • Align the CPU (LGA1150) with the socket, matching the gold triangle on the CPU with the triangle on the socket.
   • په نرمۍ سره CPU په ساکټ کې ځای په ځای کړئ پرته له دې چې فشار یې ورکړئ.
   • Close the retention arm to secure the CPU.

   • 
4. د CPU کولر نصب کړئ: Apply thermal paste (if not pre-applied) and install the CPU cooler according to its manufacturer's instructions. Connect the CPU fan cable to the 'CPUFAN' header on the motherboard.
5. رام نصب کړئ: Open the clips on the DDR3 DIMM slots. Align the RAM modules with the slots, ensuring the notch on the module matches the key in the slot. Press down firmly on both ends until the clips snap into place.
6. د ماونټ مور بورډ: په احتیاط سره مور بورډ په کیس کې ځای په ځای کړئ، د سکرو سوري د سټینډ آف سره سم کړئ. مور بورډ د پیچونو سره خوندي کړئ.
7. د بریښنا رسولو سره نښلول: Connect the 24-pin ATX power connector and the 4-pin or 8-pin CPU power connector from your power supply to the corresponding ports on the motherboard.
8. د ذخیره کولو وسایل وصل کړئ: Connect SATA data cables from your storage drives (HDD/SSD) to the SATA ports on the motherboard. Connect SATA power cables from your power supply to the drives.
9. د پراختیا کارتونه نصب کړئ (اختیاري): If using a dedicated graphics card or other PCI-E/PCI cards, install them into the appropriate slots and secure them.
10. د مخکینۍ پینل کیبلونه وصل کړئ: Connect the front panel headers (Power Button, Reset Button, HDD LED, Power LED, USB, Audio) to the corresponding pins on the motherboard. Refer to your case manual for specific pin assignments.
11. Connect Rear I/O: Connect peripherals such as keyboard, mouse, monitor, and network cable to the rear I/O ports.

5. عملیاتي لارښوونې

۵.۱ لومړی بوټ

After completing the hardware installation, connect your monitor, keyboard, and mouse. Power on the system. The computer should perform a Power-On Self-Test (POST) and display the manufacturer's logo or system information.

۴.۲ د BIOS/UEFI لاسرسی

To access the BIOS/UEFI setup utility, press the designated key during the POST process (typically DEL, F2, F10, or F12). Common settings you might adjust include:

• د بوټ امر: Configure the sequence of storage devices from which the system attempts to boot.
• نېټه او وخت: Set the system clock.
• د سیسټم معلومات: View details about your installed CPU, RAM, and other hardware.

6. ساتنه

• پاک ساتل: د خپل کمپیوټر کیس او مور بورډ په منظم ډول پاک کړئ ترڅو د دوړو د راټولیدو مخه ونیسئ، کوم چې کولی شي د ډیر تودوخې او اجزاو د ناکامۍ لامل شي. د فینونو او هیټسینکونو څخه د دوړو لرې کولو لپاره د فشار شوي هوا څخه کار واخلئ.
• د مایعاتو څخه ډډه وکړئ: Keep liquids away from your computer to prevent accidental spills and short circuits.
• سمه درملنه: When handling the motherboard or other internal components, always follow anti-static precautions.
• د BIOS تازه معلومات: Only update the BIOS if necessary and follow the instructions provided by HP or the motherboard manufacturer carefully. Incorrect BIOS updates can render the motherboard inoperable.

7. ستونزه حل کول

7.1 عام مسایل

• بریښنا نشته / پوسټ نشته:
  • Check all power connections (24-pin ATX, 4/8-pin CPU).
  • ډاډ ترلاسه کړئ چې د بریښنا رسولو په سمه توګه کار کوي.
  • د RAM ماډلونه بیا ځای پر ځای کړئ. یوازې د یو RAM سټیک سره بوټ کولو هڅه وکړئ.
  • Reseat the CPU and check for bent pins (refer to Figure 2 for CPU socket caution).
  • Disconnect all non-essential peripherals.
• نه ښودنه:
  • Ensure the monitor is connected to the correct video output (onboard or dedicated GPU).
  • ګرافیک کارت بیا ځای پر ځای کړئ (که چیرې تطبیق شي).
  • Test with a different monitor or cable.
• د سیسټم بې ثباتي/خرابی:
  • Check CPU and GPU temperatures. Ensure coolers are properly installed and fans are spinning.
  • Verify RAM compatibility and stability using memory diagnostic tools.
  • ډاډ ترلاسه کړئ چې ستاسو د بریښنا رسولو واحد (PSU) کافي او باثباته بریښنا چمتو کوي.
• د بوټ وسیله ونه موندل شوه:
  • Check SATA data and power cable connections to your storage drives.
  • Verify the boot order in the BIOS/UEFI settings.
  • Ensure the operating system is properly installed on the selected boot drive.
• پردي مسایل:
  • Ensure USB devices are connected to functional ports (refer to Figure 3 for I/O ports).
  • Install necessary drivers for new hardware.

7.2 د CMOS پاکول

If you encounter persistent boot issues or incorrect BIOS settings, you may need to clear the CMOS (Complementary Metal-Oxide-Semiconductor) to reset BIOS settings to default. This is typically done by:

• Disconnecting power from the PC.
• Removing the small coin-cell battery (CMOS battery) from the motherboard for 5-10 minutes.
• Alternatively, using a 'Clear CMOS' jumper if available on the motherboard (refer to the motherboard diagram for location).

8. د کارن لارښوونې

• This motherboard is reported to have all functions working well and is described as original and Grade A, not repaired.
• The seller states that all products are tested before shipment, providing an assurance of initial functionality.
• Always verify the compatibility of your CPU, RAM, and other components with the LGA1150 socket and H97 chipset before installation.

9. تضمین او ملاتړ

9.1 د تضمین موده

This product typically comes with a 45-day warranty period, starting from the date the buyer signs for the parcel.

۸.۱ بیرته ستنیدل او ځای ناستی

• If the product is found to be defective or not working as intended, the seller accepts returns. Buyers can choose between a product replacement or a full refund.
• For defective products, the buyer is responsible for the freight cost to return the item to the seller, and the seller will cover the freight cost for shipping the replacement or refund.
• If a buyer purchases the wrong product due to their own error, they will be responsible for all freight costs and a 15% service charge.

9.3 تخنیکي ملاتړ

For any questions or issues not covered in this manual, please contact the seller directly for assistance. They are committed to providing support and resolving any concerns you may have.