COMFAST WiFi7 BE3600 Wireless Extender

1. پیژندنه

The COMFAST WiFi7 BE3600 Wireless Extender (Model CF-WR773BE) is a high-performance device designed to expand your existing Wi-Fi network coverage, eliminate dead spots, and provide stable, high-speed internet access throughout your home or office. Utilizing the new generation WiFi7 standard, it offers dual-band operation (2.4GHz and 5GHz) with a combined transmission rate of up to 3570Mbps, supporting advanced technologies like MU-MIMO and OFDMA for enhanced network efficiency and reduced latency. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

Figure 1: COMFAST WiFi7 BE3600 Wireless Extender

2. کلیدي ځانګړتیاوې

• Advanced Wi-Fi Expansion: Eliminates wireless signal dead spots, providing full house coverage.
• High-Speed Dual-Band: Up to 3570Mbps combined speed (688Mbps on 2.4GHz, 2882Mbps on 5GHz) with stronger anti-interference capabilities, compatible with gigabit home routing.
• لوړ شوی سیګنال: Equipped with 4*5dBi high-gain omnidirectional antennas for significantly improved signal coverage and wall penetration.
• Flexible Antenna Design: Antennas can be rotated to adjust signal transmission and reception for optimal performance.
• ملټي موډ عملیات: Supports Repeater, Router, and AP modes to adapt to various networking needs.
• سیم نښلول: Features a 10/100/1000Mbps LAN/WAN RJ45 Ethernet port, allowing connection to wired devices like TVs and computers.
• د تودوخې مؤثره ضایع کول: Scientific heat dissipation design ensures 24-hour stable operation without disconnection or overheating.
• پلګ او پلی: Automatically saves configurations, allowing for easy relocation without re-setup.
• هوښیار سیګنال رڼا: Visual indicators provide real-time feedback on power, network port, and Wi-Fi signal status.

Figure 2: WiFi7 Relay Innovation and Network Expansion

Figure 3: Gigabit Dual-Band Frequency and Speed

3. د بسته محتويات

مهرباني وکړئ بسته په دقت سره وګورئ ترڅو ډاډ ترلاسه کړئ چې ټول توکي شتون لري:

• 1 x COMFAST WiFi Repeater (CF-WR773BE)
• 1 د شبکې کیبل
• 1 x د چټک نصبولو لارښود

شکل 4: د بسته محتويات

4. مشخصات

شکل ۲: د محصول ابعاد

۴. د تنظیم لارښوونې

The setup process for the COMFAST WiFi7 Extender is designed to be simple and quick, requiring no app download. Follow these steps:

1. پاور آن او وصل کړئ: Plug the WiFi extender into a power outlet. On your smartphone or computer, connect to the extender's default Wi-Fi network, typically named 'COMFAST_xxx' (where xxx are unique characters).
2. Access Settings Interface: خلاص a web browser (e.g., Chrome, Firefox) and enter the IP address 192.168.10.1 into the address bar. This will take you to the extender's settings interface.
3. Configure Repeater: In the settings interface, select the Wi-Fi network (SSID) of your main router that you wish to extend. Enter the password for your main router's Wi-Fi network. Click on 'Settings' or 'Apply' and wait for the repeater to successfully configure and connect.

Figure 6: Quick Setup Guide via Smartphone

6. عملیاتي طریقې

The CF-WR773BE supports three main operating modes:

• Repeater Mode (Wireless to Wireless): In this mode, the extender wirelessly connects to your existing router's Wi-Fi network and re-broadcasts it, extending the signal coverage to eliminate dead zones. This is ideal for expanding Wi-Fi coverage in areas where the main router's signal is weak.
• AP/Router Mode (Wired to Wireless): When connected to your modem or router via an Ethernet cable, the extender can function as a wireless access point (AP) or a router, creating a new Wi-Fi network. This is useful for converting a wired internet connection into a wireless one.
• Wireless to Wired Mode: The extender can receive a wireless signal from your main router and provide a wired internet connection through its Ethernet port to devices such as smart TVs, gaming consoles, or desktop computers that lack Wi-Fi capabilities or require a more stable connection.

Figure 7: Repeater Mode (Wireless to Wireless)

Figure 8: AP/Router Mode (Wired to Wireless)

Figure 9: Wireless to Wired Connection

7. Optimal Signal Placement

Proper placement of your WiFi extender is crucial for maximizing its performance and coverage. Consider the following guidelines:

• سم ځای پرځای کول: The repeater should be placed approximately midway between your main router and the area where you need extended Wi-Fi coverage. Ensure that the repeater's signal light indicates a strong connection to the main router.
• Avoid Placing Too Close: If the repeater is too close to the main router, it may not effectively extend the signal to distant areas, even if its signal lights appear normal.
• Avoid Placing Too Far: If the repeater is too far from the main router, it will receive a weak signal, indicated by a red signal light, and will be unable to expand the network properly.
• خنډونه: Walls, especially bearing walls, and other large objects can weaken Wi-Fi signals. Try to place the repeater in a location with minimal obstructions between it and both the main router and the target coverage area.

Figure 10: Suggestions for Repeater Placement

8. د شاخص څراغونه

The CF-WR773BE features intelligent visualization signal lights to provide clear feedback on its operating status:

• د بریښنا شاخص ر Lightا: A constant blue light indicates that the device is powered on.
• د شبکې پورټ حالت رڼا: A constant blue light indicates that the network cable is connected normally (relevant for AP/Router or Wireless to Wired modes).
• د وائی فای حالت رڼا:
  • شنه دوامداره رڼا: Indicates that the device's Wi-Fi is connected.
  • سور دوامداره رڼا: Indicates a weak repeater signal.
  • Blue constant brightness: Indicates a strong repeater signal.

Figure 11: Intelligent Visualization Signal Lights

9. ساتنه

• پاکول: د وسیلې د پاکولو لپاره نرم، وچ ټوکر وکاروئ. د مایع یا ایروسول پاکوونکو څخه کار مه اخلئ.
• وینټیلیشن: Ensure the device is placed in a well-ventilated area. The scientific heat dissipation design helps maintain stable operation, but blocking vents can lead to overheating.
• د فرم ویئر تازه معلومات: Periodically check the COMFAST official webد غوره فعالیت او امنیت ډاډمن کولو لپاره د فرم ویئر تازه معلوماتو لپاره سایټ.
• د فابریکې ترتیباتو ته بیا تنظیم کول: If you encounter persistent issues or wish to reconfigure the device from scratch, you can perform a factory reset. Locate the RESET/WPS button (often a small pinhole) on the device. With the device powered on, press and hold the RESET button for approximately 5-10 seconds until the indicator lights change, then release. The device will restart with factory default settings.

Figure 12: Efficient Heat Dissipation Design

10. ستونزه حل کول

دلته ځینې عام ستونزې او د دوی حلونه دي:

Q1: Do I need to re-set up the WiFi repeater if it was powered off after successful setup?

A1: No, you do not need to set it up again. All configuration information is saved. Re-setup is only required if you manually restore factory settings.

Q2: Can the WiFi repeater work with a WiFi router from another brand?

A2: Yes, the COMFAST WiFi repeater is compatible with most WiFi routers on the market. However, it may perform best when paired with another COMFAST WiFi repeater or router.

Q3: Will my network speed become faster by using the WiFi repeater?

A3: The repeater extends the coverage of your WiFi signals, but it does not inherently increase your internet speed. It helps maintain your existing speed over a larger area.

Q4: How far can the signal be extended?

A4: The WiFi repeater can extend coverage to areas of 70-100 square meters. For wider coverage, you may use multiple repeaters. The actual effect depends on the environment; for example, bearing walls can weaken the signal, limiting extension to a single room.

Q5: I have many rooms at home. Is one repeater enough?

A5: If you need to cover multiple rooms or a very large area, you may need to add more WiFi repeaters depending on your specific environment and signal requirements.

Figure 13: Common Problems with WiFi Repeater

11. د کارن لارښوونې

• Optimal Signal Relay: For the best performance, ensure the repeater is placed where it can receive a strong, full signal from your main router before it relays the signal further. This ensures efficient signal extension.
• د انتن تنظیم کول: Experiment with the flexible antenna angles to find the best direction for signal transmission and reception in your specific environment.
• د تار لرونکی شاته هال: If possible, use the Ethernet port to connect the repeater to your main router (AP mode) for a more stable and higher-bandwidth connection, especially in multi-story homes.

12. تضمین او ملاتړ

The COMFAST WiFi7 BE3600 Wireless Extender is covered by a manufacturer's warranty. For detailed warranty terms, technical support, or service inquiries, please refer to the official COMFAST webسایټ ته لاړ شئ یا مستقیم د دوی د پیرودونکو خدماتو سره اړیکه ونیسئ. د تضمین ادعاوو لپاره خپل د پیرود رسید وساتئ.