COMFAST AX3000 WiFi 6 Wireless Panel Access Point

1. پیژندنه

The COMFAST AX3000 (Model: CF-E593AX) is a high-performance WiFi 6 wireless panel access point designed to provide a superior and stable internet experience. Supporting both 2.4GHz and 5.8GHz dual bands, it delivers a combined wireless speed of up to 3000Mbps. This device is ideal for achieving full-signal coverage and seamless roaming in various large indoor environments, including homes, offices, hotels, and educational institutions.

2. کلیدي ځانګړتیاوې

• High-Performance Chipset: Equipped with MT7981B+MT7976CN+AN8801SB brand chip solution for stable and reliable performance.
• دوه اړخیز ارتباط: Supports concurrent 2.4GHz and 5.8GHz operation for more stable signals and efficient anti-interference.
• Full Gigabit Ethernet Ports: Features full Gigabit Ethernet ports to ensure unrestricted broadband and smoother network signals.
• د PoE بریښنا رسول: Utilizes 48V standard Power over Ethernet (PoE) for safe, secure, and convenient installation, eliminating the need for separate power cables.
• High Wireless Speed: Achieves up to 3000Mbps wireless speed for a faster and more responsive internet experience.
• Smart Antenna Design: Built-in smart antenna ensures strong signal strength, low latency, and high reliability.
• Standard 86 Panel Design: Designed as a standard 86-type panel AP, making it widely applicable and suitable for various installation scenarios.
• Advanced Wireless Protocols: Supports IEEE802.11a/b/g/n/ac/ax protocols, including the latest WiFi 6 standard.

3. مشخصات

Note: Pure manual measurement, there may be minor errors in dimensions.

Figure: Product dimensions (86mm x 86mm x 49.5mm).

4. د بسته محتويات

مهرباني وکړئ د لاندې توکو لپاره په بسته کې وګورئ:

• COMFAST AX3000 WiFi 6 Wireless Panel Access Point (CF-E593AX)
• 48V / 0.32A PoE Power Adapter (if configured)
• د سکرو نصب کول
• د چټک نصبولو لارښود (دا سند)

Figure: COMFAST AX3000 WiFi 6 Panel AP and its typical packaging.

5. ترتیب او نصب کول

The COMFAST AX3000 is designed for in-wall installation, fitting into a standard 86-type panel box. It supports Power over Ethernet (PoE) for simplified wiring.

5.1. د نصبولو پړاوونه

1. د دیوال بکس چمتو کړئ: Ensure you have a standard 86-type concealed wall box ready for installation.
2. د شبکې کیبل سره وصل کړئ: Plug the wall network cable into the network port on the back of the AP. Remove the AP cover if necessary to access the port.
3. AP نصب کړئ: Wait for the indicator light to come on normally. Mount the AP onto the concealed wall box using the provided screws.
4. Secure Face Cover: Close the AP face cover. The installation is complete.

Figure: Step-by-step installation diagram for the panel AP.

۴.۲. د ایترنیټ (PoE) اتصال باندې د بریښنا اتصال

The CF-E593AX supports 48V standard PoE power supply, eliminating the need for a separate power outlet near the AP. It receives both power and data through a single network cable from a PoE switch or PoE injector.

Figure: Illustration of PoE power supply, showing a single network cable providing both power and data.

Figure: Preview image for an installation tutorial video for the CF-E593AX.

6. عملیات

Once the COMFAST AX3000 is successfully installed and powered on, it will broadcast Wi-Fi signals on both 2.4GHz and 5GHz bands. You can connect your wireless devices (smartphones, laptops, tablets, etc.) to the network by selecting the appropriate Wi-Fi network name (SSID) and entering the password.

۵.۱. د وای فای شبکې سره نښلول

1. On your wireless device, open the Wi-Fi settings.
2. د شته شبکو لپاره سکین وکړئ.
3. Select the SSID broadcasted by the COMFAST AX3000 (e.g., "COMFAST_XXXX").
4. Enter the Wi-Fi password (if configured).
5. ستاسو وسیله باید اوس د وای فای شبکې سره وصل وي.

۵.۱. بې سیم رومینګ

The COMFAST AX3000 supports seamless roaming, allowing your devices to automatically switch between multiple AP signals without interruption as you move throughout the coverage area. This ensures a smooth and consistent internet experience.

Figure: Seamless roaming in a multi-story environment, showing devices maintaining connection across different APs.

7. Network Configuration and Management

The COMFAST AX3000 can be managed via a web-based interface, often in conjunction with an AC gateway router for centralized control in commercial scenarios.

7.1. ته لاسرسی Web سمبالښت برسیر

Typically, you can access the AP's management interface by connecting a computer to the AP's LAN port (or a network connected to the AP) and entering its default IP address into a web browser. Refer to the AC gateway router's manual for specific instructions on managing the APs in a larger network setup.

شکل: Example of a remote management interface for COMFAST APs, showing network monitoring and configuration options.

7.2. Commercial Scenario Network Diagram

For larger deployments, multiple COMFAST AX3000 APs can be integrated into a network managed by an AC gateway router and PoE switches, as shown in the diagram below.

Figure: Network topology for a commercial scenario, demonstrating how multiple APs are connected via PoE switches to an AC gateway router.

8. Advanced WiFi 6 Features

The COMFAST AX3000 leverages advanced WiFi 6 technologies to enhance network performance and efficiency.

8.1. OFDMA and MU-MIMO

The combination of OFDMA (Orthogonal Frequency-Division Multiple Access) and MU-MIMO (Multi-User, Multiple-Input, Multiple-Output) technology significantly improves user internet experience in multi-user network scenarios. OFDMA allows multiple simultaneous users to be served at once per frame of data, reducing latency and improving overall network efficiency compared to older Wi-Fi standards where only one user could be served at a time.

Figure: Illustration comparing OFDMA efficiency in Wi-Fi 6 (multiple users simultaneously) versus Wi-Fi 5 (one user at a time).

8.2. TWT Technology (Target Wake Time)

TWT technology unifies the scheduling of wireless terminal dormancy and data transmission time. This improves the disordered competition of multiple devices for the channel and groups wireless terminals into different TWT cycles, significantly improving the battery life of connected equipment.

Figure: Comparison showing how TWT in 802.11ax (Wi-Fi 6) orders device sleep states for energy saving, unlike the disordered states in 802.11ac.

8.3. Automatic Radio Frequency Optimization

The AP automatically calculates the neighbor relationship between APs in the network and adjusts wireless transmission power and channel based on real-time interference and load of nearby devices. This ensures stable and efficient network operation by reducing mutual interference.

Figure: Illustration of network optimization, showing reduced interference and improved experience after automatic radio frequency adjustments.

9. ستونزه حل کول

If you encounter issues with your COMFAST AX3000, please refer to the following common troubleshooting steps:

• د بریښنا/ شاخص څراغونه بند نه دي:
  • Ensure the PoE power adapter or PoE switch is properly connected and functioning.
  • Check the network cable connection to the AP.
• د وای فای سیګنال نشته:
  • Verify the AP is powered on and indicator lights are normal.
  • Check the network cable connection to the WAN port.
  • Ensure the AP is properly configured (SSID broadcast enabled, correct frequency bands).
• د انټرنېټ ورو سرعت:
  • د خپل انټرنیټ خدمت چمتو کونکي د اتصال سرعت وګورئ.
  • Ensure there are no excessive devices or bandwidth-intensive activities on the network.
  • Consider the distance between your device and the AP; move closer if possible.
  • د نورو بریښنایی وسیلو څخه د احتمالي لاسوهنې لپاره وګورئ.
  • Verify the AP's channel optimization settings.
• د مدیریت انٹرفیس ته لاسرسی نشي کیدی:
  • Ensure your device is connected to the network managed by the AP or AC gateway.
  • Verify the correct IP address for the AP or AC gateway.
  • په خپل کمپیوټر کې د فایر وال یا انټي ویروس سافټویر په لنډمهاله توګه غیر فعال کړئ.

If the problem persists, please contact COMFAST technical support for further assistance.

10. ساتنه

To ensure optimal performance and longevity of your COMFAST AX3000, follow these maintenance guidelines:

• پاک ساتل: Regularly wipe the exterior of the AP with a soft, dry cloth. Avoid using liquid cleaners or solvents.
• وینټیلیشن: Ensure the ventilation slots on the AP are not obstructed to prevent overheating.
• د فرم ویئر تازه معلومات: Periodically check the COMFAST official website for firmware updates. Updating the firmware can improve performance, add new features, and fix bugs. Follow the instructions provided with the firmware update carefully.
• د چاپیریال شرایط: Operate the AP within the specified working temperature and humidity ranges (0°C-40°C, 10%-90%RH Non-condensing).

11. تضمین او ملاتړ

For warranty information, technical support, and service inquiries, please refer to the official COMFAST webسایټ یا خپل محلي توزیع کونکي سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.

جوړونکی: کامفا

ماډل: CF-E593AX