FURUI PM-Pro RFID IC/ID Copier Duplicator User Manual

1. پیژندنه

The FURUI PM-Pro is a versatile RFID IC/ID copier and duplicator designed for reading and writing various smart cards. This device supports a wide range of frequencies and card types, making it suitable for diverse applications such as access control, identification, and data management. Its compact and portable design, coupled with powerful software capabilities, allows for efficient card operations, including sector data editing and encryption cracking.

This manual provides detailed instructions on how to set up, operate, and maintain your PM-Pro device, along with troubleshooting tips and specifications.

2. د بسته محتويات

مهرباني وکړئ بسته په دقت سره وګورئ ترڅو ډاډ ترلاسه کړئ چې ټول توکي شتون لري:

• 1 x FURUI PM-Pro RFID IC/ID Copier
• 1 x USB Cable (integrated)
• (Note: Other products are not included unless specified by your retailer.)

Figure 2.1: The FURUI NFC PM-Pro device, a smart card read and write device, shown with its integrated USB cable for connectivity.

3. مشخصات

Figure 3.1: Approximate dimensions of the FURUI NFC PM-Pro device.

4. ترتیب کول

Follow these steps to set up your FURUI PM-Pro device:

1. کمپیوټر سره وصل کړئ: Plug the integrated USB cable of the PM-Pro device into an available USB port on your Windows computer.
2. د سافټویر نصب کول: The PM-Pro requires dedicated software for operation. If the software is not included in the package, please download it from the manufacturer's official website or contact customer support for the download link.
3. چلوونکي نصب کړئ: During software installation, ensure any necessary drivers for the PM-Pro are installed correctly. Follow the on-screen prompts.
4. سافټویر پیل کړئ: Once installation is complete, launch the PM-Pro software. The device status should show "Connected" in the software interface.

4.1 شکل: تفصیل view of the device highlighting the designated areas for placing IC (Integrated Circuit) and ID (Identification) cards for reading and writing operations.

5. عملیاتي لارښوونې

The FURUI PM-Pro allows you to read, decode, write, and format various RFID/NFC cards. The software interface provides comprehensive control over these operations.

5.1. Reading an IC/ID Card

1. Place the IC or ID card on the corresponding "IC READ WRITE" or "ID READ WRITE" area of the device.
2. In the PM-Pro software, navigate to the "LowFreqCard" or "HighFreqCard" tab depending on your card type.
3. Click the "Read" button in the "Operate" section.
4. The software will display "IC card read successfully!" or similar confirmation, along with the card's serial number and decoded data in the "Decode block" section.

Figure 5.1: Screenshot of the NFC PM-Pro software interface displaying a successful IC card read, including the device type, serial number, status, and decoded hexadecimal data blocks. The 'Operate' section with 'Decode', 'Read', 'Write', 'Format' buttons is visible.

5.2. Decoding Encrypted Cards

The PM-Pro can crack most card encryption. For encrypted IC cards (e.g., S50, S70):

1. Place the encrypted IC card on the "IC READ WRITE" area.
2. Select the appropriate card type (S50 or S70) under "Parameter".
3. If you have a known key, enter it in the "Use key" field. Otherwise, you can attempt a "Brute Attack" by selecting a decoding level.
4. Click the "Decode" button. The software will indicate "IC card decoding is complete!" upon success.
5. The decoded data will be displayed in the "Decode block" section (D). The operation buttons (C) will become active for further actions.

Figure 5.2: Screenshot of the NFC PM-Pro software interface indicating successful IC card decoding. Sections are labeled: B for decoding status, C for operation buttons (Decode, Read, Write, Format, Single Read, Single Write, Write to phone/band, Analysis, ImportDUM, Save data), and D for the decoded data blocks.

5.3. Writing to a Card

After reading or decoding a card, you can write the data to a compatible blank card (e.g., T5577, EM4305, Mifare UID CUID FUID).

1. Ensure the data you wish to write is loaded or decoded in the software. Sector data can be edited directly in the "Decode block" section if needed.
2. Place the blank writable card on the appropriate "IC READ WRITE" or "ID READ WRITE" area.
3. Click the "Write" button in the "Operate" section.
4. Confirm the write operation if prompted by the software.

5.4. Other Operations

• بڼه: Use this function to format compatible writable cards.
• Single Read/Single Write: For specific block operations.
• Write to phone/band: Allows writing data to compatible NFC-enabled phones or bands (functionality may vary).
• تحلیل: For detailed analysis of card data.
• ImportDUM/Save data: To import or save card data files.

6. ساتنه

• پاکول: د وسیلې د پاکولو لپاره نرم، وچ ټوکر وکاروئ. مایع پاکوونکي یا د کثافاتو مواد مه کاروئ.
• ذخیره کول: وسیله په یخ او وچ ځای کې د مستقیم لمر وړانګو او سختې تودوخې څخه لرې وساتئ.
• د سافټویر تازه معلومات: په منظم ډول د تولید کونکي وګورئ website for software updates to ensure optimal performance and compatibility with new card types.
• د فزیکي زیان څخه مخنیوی وکړئ: وسیله په احتیاط سره اداره کړئ. د غورځولو یا ډیر ځواک سره د مخ کیدو څخه ډډه وکړئ.

7. ستونزه حل کول

8. د کارن لارښوونې

• Software Availability: The device relies on specific software for its functions. Ensure you have the correct software installed. If not provided with the device, check the manufacturer's webد ډاونلوډ لینکونو لپاره سایټ.
• د کارت ځای په ځای کول: For best results, ensure the card is placed flat and centered on the designated IC or ID read/write area during operations.
• بیک اپ ډاټا: Always save important card data using the "Save data" function before attempting complex operations like formatting or writing, especially when experimenting with new card types.
• Experiment with Decoding: For encrypted cards, if a direct key doesn't work, utilize the brute force attack options provided in the software, starting with lower decoding levels.

9. تضمین او ملاتړ

For warranty information, technical support, or further assistance, please refer to the documentation provided by your retailer or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.