د کامفاسټ 3000Mbps ډبل بانډ وائی فای 6 انټیل AX200 PCI-E شبکې کارت کارونکي لارښود

پیژندنه

This manual provides detailed instructions for the installation, operation, and maintenance of your Comfast 3000Mbps Dual Band WiFi 6 Intel AX200 PCI-E Network Card. This high-performance adapter is designed to enhance your desktop computer's wireless connectivity with Wi-Fi 6 (802.11ax) and Bluetooth 5.2 capabilities, offering superior speed and stability for gaming, streaming, and general use.

کلیدي ځانګړتیاوې

Intel AX200 Chip: Ensures excellent performance for demanding applications and multitasking.
د وای فای ۶ (۸۰۲.۱۱ میکس) ملاتړ: Delivers speeds up to 3000Mbps (574Mbps on 2.4GHz, 2400Mbps on 5GHz).
دوه اړخیز عملیات: Utilizes both 2.4GHz for strong wall penetration and 5GHz for high-speed, anti-interference connections.
د بلوتوټ 5.2 ټیکنالوژي: Provides longer range and more stable connections for Bluetooth devices like mice, keyboards, speakers, and headphones.
MU-MIMO ټیکنالوژي: Improves network efficiency and speed for multiple concurrent users.
PCI-E Interface: Compatible with PCI-E 1X/4X/16X slots.
د عملیاتي سیسټم ملاتړ: Designed for Windows 10 (64-bit) and Windows 11.
External High-Gain Antennas: Two 5dBi omnidirectional antennas for enhanced signal reception.
د تودوخې د ضایع کیدو ډیزاین: Special design (on Pro and Plus models) to maintain stable operation.
Optional 1.5m Extension Base: (CF-AX200 Plus model) Allows flexible antenna placement for optimal signal.

Diagram showing 8 benefits of Wi-Fi 6 network card including 4X Speed, Energy Saving, Safer WPA3, Dual-band, Higher Traffic Volume, OFDMA Tech, Higher Connection Efficiency, and MU-MIMO support. — Figure 1: Benefits of Wi-Fi 6 technology.

د بسته محتويات

مهرباني وکړئ د بسته بندۍ محتويات وګورئ ترڅو ډاډ ترلاسه کړئ چې ټول توکي شتون لري:

Comfast 3000Mbps Dual Band WiFi 6 PCI-E Network Card
Two 5dBi High Gain Antennas
بلوتوث کیبل
د نصبولو سکرو
Warranty Card / User Manual
(For CF-AX200 Plus model only: 1.5m Antenna Extension Base)

Image showing the package contents: BT Cable, Warranty Card, Screw, and the CF-AX200 Plus network card with antennas. — Figure 2: Typical package contents for CF-AX200 Plus.

مشخصات

صفت	ارزښت
هارډویر	AX200NGW
انتن	External 2*5dBi
د انٹرفیس ډول	PCI-E X1 (Compatible with PCI-E 1X/4X/8X/16X slots)
بې سیم نرخ	2.4GHz: 574Mbps؛ 5GHz: 2400Mbps
د شبکې معیاري	Gigabit Network, IEEE 802.11ax/ac/a/b/g/n
د لیږد بریښنا	20dBm
بلوتوث پروتوکول	Bluetooth 5.2 (Some models may list BT 5.1)
د OS ملاتړ کوي	Windows 10 (64bit), Windows 11
غوښتنلیک	Desktop (Except MAC)
د محصول اندازه	90*64mm; Antenna length 221.5mm; Extension cable 1.5m (for Plus model)
د کار د حرارت درجه	0℃ ~ 40℃
د ذخیرې د حرارت درجه	-40℃ ~ 70℃
کاري رطوبت	۵٪ ~ ۷۵٪ RH غیر کنډنسنګ
د ذخیره کولو رطوبت	۵٪ ~ ۷۵٪ RH غیر کنډنسنګ

Table of detailed specifications for the Comfast AX200NGW network card. — شکل ۹: د محصول تفصيلي مشخصات.

د تنظیم کولو لارښوونې

Follow these steps to install your Comfast PCI-E Network Card:

خپل کمپیوټر چمتو کړئ:
- خپل کمپیوټر بند کړئ او ټول کیبلونه خلاص کړئ.
- Open the side cover of your computer chassis.
Identify PCI-E Slot:
- Locate an available PCI-E slot on your motherboard. The card is compatible with PCI-E 1X, 4X, 8X, or 16X slots.
Figure 4: Compatible PCI-E interfaces on a motherboard.
Connect Bluetooth Cable to Network Card:
- Carefully insert the small end of the provided Bluetooth cable into the designated port on the network card.
Install Network Card:
- Align the network card with the chosen PCI-E slot and firmly press it down until it is securely seated.
- Secure the card with a screw to the chassis.
Connect Bluetooth Cable to Motherboard:
- Connect the other end of the Bluetooth cable (usually a 9-pin connector) to the corresponding Bluetooth line interface on your motherboard.
Assemble Antennas:
- Screw the two high-gain antennas onto the connectors on the network card's bracket.
- If you have the CF-AX200 Plus model, connect the antennas to the extension base and place the base in an optimal location for signal reception.
Figure 5: Portable antenna design for optimal signal.
بیا راټولول او فعالول:
- Close the computer chassis side cover.
- Plug in all cables and power on your computer.
د ډرایور نصب کول:
- Once your computer boots up, you will need to install the drivers.
- Visit the official Comfast webسایټ (www.joo-win.com) and navigate to the "Download Center".
- لټون your model (e.g., "JW-AX200-PRO") and download the latest WiFi and Bluetooth drivers for Windows 10/11.
- مهمه یادونه: Do NOT run the Bluetooth and WiFi driver installers at the same time. Install them separately.
- د ډرایور نصبولو بشپړولو لپاره د سکرین پر لارښوونو تعقیب کړئ.

Four-panel image illustrating the installation process: 1. Opening the chassis, 2. Inserting the card into a PCI-E slot, 3. Connecting the Bluetooth wire, 4. Assembling the antennas. — Figure 6: Visual guide for hardware installation.

Video 1: Step-by-step installation guide for the Comfast PCI-E Wireless Adapter.

عملیاتي لارښوونې

After successful installation and driver setup, your network card is ready for use.

د وائی فای سره نښلول:

په خپل سیسټم ټری کې د وای فای آیکون باندې کلیک وکړئ (معمولا ستاسو د سکرین په ښکته ښیې کونج کې).
له لیست څخه خپل مطلوب وای فای شبکه غوره کړئ.
Enter the network password if prompted and click "Connect".
ستاسو کمپیوټر باید اوس د وای فای شبکې سره وصل وي.

بلوتوث

Ensure Bluetooth is enabled on your computer (check Windows Settings > Devices > Bluetooth & other devices).
خپل بلوتوث وسیله (د مثال په توګه، هیډفونونه، موږک) د جوړه کولو حالت ته واچوئ.
په خپل کمپیوټر کې، "بلوتوث یا بل وسیله اضافه کړئ" کلیک وکړئ او "بلوتوث" غوره کړئ.
له لیست څخه خپل وسیله غوره کړئ او د جوړې بشپړولو لپاره په سکرین کې هر ډول لارښوونې تعقیب کړئ.

Diagram illustrating Bluetooth 5.1 transmission connecting a desktop PC to various Bluetooth devices like speakers, earphones, printers, remote controllers, smartphones, tablets, mice, and keyboards. — Figure 7: Bluetooth 5.1 connectivity with various devices.

ساتنه

Keep the network card and antennas free from dust. Use compressed air to clean the inside of your PC periodically.
Ensure antennas are securely connected but do not overtighten.
Keep drivers updated by regularly checking the Comfast webد نویو نسخو لپاره سایټ.
Avoid placing the antenna extension base near large metal objects or other electronic devices that may cause interference.

د ستونزو حل کول

No Wi-Fi or Bluetooth after installation:

Ensure the card is correctly seated in the PCI-E slot.
Verify the Bluetooth cable is securely connected to both the network card and the motherboard's USB header.
Check Device Manager in Windows to see if the device is recognized and if there are any driver errors. Reinstall drivers if necessary.
Make sure Wi-Fi and Bluetooth are enabled in Windows settings.

د وای فای ورو سرعت:

Ensure your router supports Wi-Fi 6 (802.11ax) for optimal performance.
د خپل انټرنیټ خدمت چمتو کونکي سرعت وګورئ.
Position the antennas for best signal reception, away from obstructions.
Try connecting to the 5GHz band if available, as it generally offers higher speeds with less interference.

د بلوتوث وسیله نه جوړه کیږي:

Ensure the Bluetooth cable is properly connected.
ډاډ ترلاسه کړئ چې د بلوتوث وسیله د جوړه کولو حالت کې او په حد کې ده.
Remove any previous pairings of the device from your computer and try again.
د بلوتوث چلوونکي تازه کړئ.

د کارن لارښوونې

For best performance, especially in gaming, ensure your router is also Wi-Fi 6 compatible.
If experiencing intermittent connectivity, try adjusting the position of the external antennas.
Always download drivers directly from the manufacturer's official website to ensure compatibility and security.
Consider using the 1.5m extension base (if applicable) to place antennas in a clear line of sight to your router for improved signal strength.

تضمین او ملاتړ

For warranty information, technical support, or further assistance, please refer to the warranty card included in your package or visit the official Comfast webپه سایټ کې www.joo-win.com.

د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.