دستورالعملونه+

JBL A Pillar Tweeter Refitting Kit

JBL A-Pillar Tweeter Refitting Kit Instruction Manual

For Toyota Camry (2018-2022), Highlander (2022), and Avolan (2019-2022)

1. محصول ختم شوview

This JBL A-Pillar Tweeter Refitting Kit is designed to upgrade the audio system in specific Toyota models by replacing the factory A-pillar trim with integrated JBL tweeters and alto horns. The kit provides an enhanced audio experience with 3D stereo surround treble.

Installed JBL A-pillar tweeter in a Toyota vehicle
Figure 1: Installed JBL A-pillar tweeter in a Toyota vehicle.
Graphic illustrating enhanced sound quality from speakers
Figure 2: Graphic illustrating enhanced sound quality from speakers.

2. مطابقت

This kit is specifically designed for the following Toyota vehicle models and years:

  • ټیوټا کیمري: ۱۹۹۷، ۱۹۹۸، ۱۹۹۹، ۲۰۰۰، ۲۰۰۱
  • Toyota Highlander: 2022
  • Toyota Avolan: 2019, 2020, 2021, 2022

Important: Ensure your vehicle's model and year match the compatibility list to guarantee proper fitment and functionality.

3. د بسته محتويات

په بسته کې معمولا لاندې برخې شاملې وي:

  • A-Pillar Trim Panels with integrated JBL Tweeters
  • JBL Alto Horns (Mid-range speakers)
  • Special wiring plugs/harnesses for connection
تفصيلي view of speaker components including A-pillar speaker, airbag area, JBL Alto horn, and JBL Tweeter
شکل 3: مفصل view of speaker components including A-pillar speaker, airbag area, JBL Alto horn, and JBL Tweeter.
Components for Camry 2018-2022 A-pillar grey set, showing trim, Alto horns, and tweeters
شکل 4: مثالample components for Camry 2018-2022 A-pillar grey set.

4. د نصب لارښود

The installation process involves replacing the original A-pillar trim panels and connecting the new JBL speakers. This kit is designed for non-destructive installation using original car holes and special plugs, eliminating the need for punching or extensive modifications.

4.1 چمتو کول

  • Ensure the vehicle's ignition is off and the battery is disconnected to prevent electrical issues.
  • Gather necessary tools (e.g., trim removal tools, screwdriver set).

4.2 Removing Original A-Pillar Trim

  1. Carefully pry off the original A-pillar trim panel using a trim removal tool. Start from the edges and work your way around.
  2. Disconnect any wiring harnesses attached to the original trim or speakers, if present.

4.3 Installing JBL A-Pillar Tweeter Kit

  1. Connect the provided special plugs from the new JBL speakers (tweeters and alto horns) to the corresponding wiring in your vehicle. These are designed to fit the original car holes without modification.
  2. Align the new JBL A-pillar trim panel with the mounting points in your vehicle.
  3. Gently press the new trim panel into place until it securely snaps into position. Ensure all clips are engaged.
  4. د موټر د بل اړخ لپاره پروسه تکرار کړئ.
Close-up of speaker installation showing original car hole, no punching required, and special plug
Figure 5: Installation detail showing original car hole and special plug connection.
Two A-pillar trims with integrated JBL speakers, illustrating non-destructive installation
Figure 6: Original panel replacement for non-destructive installation.
Before and After comparison of the A-pillar with and without the JBL tweeter installed
Figure 7: Visual comparison of the A-pillar before and after installation.

5. عملیاتي لارښوونې

Once installed, the JBL A-pillar tweeters and alto horns integrate with your vehicle's existing audio system. Their operation is controlled directly by your car's head unit and audio settings.

  • د موټر بیټرۍ بیا وصل کړئ.
  • Turn on the vehicle's ignition and audio system.
  • Adjust audio settings (e.g., treble, bass, balance, fader) on your car's head unit to optimize the sound output from the new speakers.
  • The tweeters are designed to provide clear, crisp high-frequency sounds, enhancing the overall audio experience with 3D stereo surround treble.
Graphic illustrating 3D stereo surround treble sound from the installed JBL tweeter
Figure 8: Illustration of 3D stereo surround treble sound.

6. ساتنه

The JBL A-pillar tweeters and alto horns require minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:

  • پاکول: Use a soft, dry cloth to gently wipe the speaker grilles and trim panels. Avoid abrasive cleaners or solvents that could damage the finish or speaker components.
  • رطوبت: Keep the speakers dry. Avoid exposing them to excessive moisture or liquids.
  • فزیکي زیانونه: Protect the speakers from physical impact or sharp objects that could puncture the cones or grilles.

7. ستونزه حل کول

If you encounter issues with your JBL A-pillar tweeter kit, refer to the following troubleshooting steps:

ستونزه احتمالي لامل د حل لاره
No sound from new speakers
  • د تارونو خلاص یا ناسم اتصال.
  • Vehicle audio settings (e.g., fader, balance) are incorrect.
  • Speaker is faulty.
  • Check all wiring connections to ensure they are secure and correctly plugged in.
  • Verify audio settings on your car's head unit.
  • If connections and settings are correct, contact support.
تحریف شوی یا خراب غږ کیفیت
  • Incorrect audio settings (e.g., treble too high).
  • Loose mounting of the speaker.
  • د سپیکر زیان.
  • Adjust treble and other EQ settings on your car's head unit.
  • Ensure the A-pillar trim is securely fastened.
  • د لیدلو وړ زیان لپاره سپیکرې معاینه کړئ.

8. مشخصات

فیچر تفصیل
د توکو ډول Multi-tone & Claxon Horns (as per product classification)
د تطبیق وړ موټر ماډلونه Toyota Camry (2018-2022), Highlander (2022), Avolan (2019-2022)
د سپیکر ډول JBL Tweeter, JBL Alto Horn (Mid-range)
نصب کول Original panel replacement, non-destructive, no punching required
د بهرنۍ ازموینې تصدیق CC
اصل مینلینډ چین
د بسته بندۍ ابعاد (تقریبا) اوږدوالی: 45 سانتي متره، پلنوالی: 35 سانتي متره، لوړوالی: 20 سانتي متره
د بستې وزن (تقریبا) 1.8 کیلو ګرامه

9. تضمین او ملاتړ

This product is covered by standard manufacturer warranties. For specific warranty details or technical support, please refer to the seller's information or contact their customer service.

د کاروونکي لارښوونې:

  • مطابقت تایید کړئ: Always double-check that your car's model and year are listed as compatible before purchasing and installing to avoid fitment issues.
  • اصليت: The product is advertised as "Original JBL" components, ensuring quality and performance consistent with the brand.

اړوند اسناد - A Pillar Tweeter Refitting Kit

مخکېview د JBL بار 5.1 سراؤنډ سافټویر تازه معلومات V22.49.21.00 د خپریدو یادښتونه او د لوړولو لارښود
د JBL بار 5.1 سراونډ ساؤنډ بار د فرم ویئر V22.49.21.00 نسخې ته تازه کولو لپاره رسمي اعلامیې یادښتونه او ګام په ګام لارښوونې. د OTA او USB اپ گریڈ میتودونه شامل دي.
مخکېview د JBL کلب 194T 3/4" څنډې سره چلول شوی ډوم ټویټر - نصب او مشخصات
د JBL کلب 194T په اړه مفصل معلومات، یو 3/4 انچه څنډه لرونکی گنبد ټویټر. د آډیو سیسټمونو لپاره مشخصات، د اسمبلۍ ډیاګرامونه، او د اتصال لارښود پکې شامل دي.
مخکېview د JBL سپیکرونو سره یوځای نښلول: یو جامع لارښود
د ښه آډیو تجربې لپاره د بلوتوث له لارې د JBL ډیری سپیکرونه په بېسیم ډول وصل کولو زده کړئ. دا لارښود د JBL کنیکټ او کنیکټ+ ځانګړتیاو په کارولو سره د JBL سپیکرونو سره وصل کول پوښي، او همدارنګه د عام اتصال ستونزو حل کول.
مخکېview د JBL JS-120 لوډ سپیکر سټینډ - ځانګړتیاوې، مشخصات، او اسمبلۍ
د JBL JS-120 لاوډ سپیکر سټینډ په اړه مفصل معلومات، پشمول د هغې ځانګړتیاوې، تخنیکي مشخصات، مطابقت لرونکي لاوډ سپیکر ماډلونه، او د اسمبلۍ لارښوونې. د لوړ شوي آډیو فعالیت او ثبات لپاره ډیزاین شوی.
مخکېview د JBL ایکسټریم چټک پیل لارښود
د JBL ایکسټریم پورټ ایبل سپیکر لپاره د چټک پیل جامع لارښود، چې تنظیم، ځانګړتیاوې او اخطارونه پوښي. په څو ژبو کې تخنیکي مشخصات پکې شامل دي.
مخکېview د JBL 5000 لړۍ سینما سیسټمونه: د کارونکي لارښود او مشخصات
د JBL 5000 لړۍ سینما سیسټمونو لپاره جامع کاروونکي لارښود، د سیسټم ترتیباتو، ډیجیټل کنټرول، اتصالاتو، د بریښنا اړتیاو، د سپیکر ځای پرځای کولو، او د 5671، 5672، او 5674 ماډلونو لپاره تخنیکي مشخصات توضیح کوي.