PROVISION ISR TM-54In1-8 Service Color LCD Monitor User Manual
General
“The new HD CCTV Test monitor support “4in1” (AHD/ TWICW/ CVBS)video format of up to 2MP~8MP resolution. It also support PTZ control by RS485 and other special features succahs DC 12V/USB/5V out put, audio test, UTP cable test, LED lighting etc. Itis designed to bring installer maximum convenience during the instalation.
Product Funtions:
Video input: Compatible with AHD, TVI, CVI, CVBS signals of up to 2MP~8MP resolution.
- 4.3inch 800(RGB) x480 resolution. PALNTSC(Auto adapt).
- PTZ control: RS485 Baud-Radu: 1200 ~ 115200bps, ‘compatible with PELCO-DIP protocols.
- Camera Power Supply: Power output of DC 12V/1A for temporarily powering on cameras for angle and zoom adjustment
- USB Power Supply: USB2 Dinterface provides 5V/1A power output
- Audio signal input
- Enhanced UTP cable, with indicator lights. the cable test distance can reach 100-150 meters. 7.COC controlicall OSD menu
- Video Test AHD tester support 720P 25F/30F1080P/25F/30F (4MP/ SMP/BMP AHD camera tester is optional*) TV tester support 720P 25F/30F 1080P 25F/30F(3MP/ AMP/SMP/BMP TVI camera tester is optional*) CV Itester support 720P 25F/30F 1080P 25F/30F(AMP/ SMP/BMP CVI camera tester s optional*)
- LED emergency lighting
- bultin 3.7V Lithium polymer bottery, 3000mAn
Product Accessories\
- Test monitor
- Wrist band
- DC output cable
- Audio test cable .
- Network cable test convertor
- USB cable
- EUIUS Power adapter
Front Panel
1 | ![]() |
Power Indicator |
2 | ![]() |
12V output power indicator |
3 | ![]() |
Data transmission indicator |
4 | ![]() |
Power on indicator |
5 | ![]() |
ZOOM+(For PTZ control) |
6 | ![]() |
ZOOM-(For PTZ control) |
7 | ![]() |
Five-way button: OSD menu- up ~down- leftright |
8 | ![]() |
FOCUS+(For PTZ control) |
9 | ![]() |
FOCUS-(For PTZ control) |
10 | ![]() |
UTP Cable test input |
11 | ![]() |
DC12V/1A power output |
12 | ![]() |
5V power input |
13 | ![]() |
Rs485 Output |
14 | ![]() |
Analog /HD TWCVIAHD signal input |
15 | ![]() |
LED Light |
16 | ![]() |
Audo input |
17 | ![]() |
Output DCSV/1A power output |
18 | ![]() |
Power swich: L ED-ON-OFF |
Operation
Pressing on Calls the OSD menu to set brightness, language, reset, etc. Crick on
to exit
Pressing on and hold the menu button for 5 seconds. toenter UTC mode “UTC” s displayed at the top of the Screen. Press the menu buton to bring up the camera menu and operate the UTC menu by up/dow/leftiright/enter. Pressing on
and hold the menu bution for 5 seconds to exit UTC mode.
Pressing on Enter the UTP cable test interface. The test procedure will start automatically. Pins 1~8 indicates the UTP Cable consistency. Click on &
to et
Pressing or enters the PTZ settings page. Set the parameters using the
up/downleftight arrows.
specification
Model Display | TM-4341N1-84.3 inch TFT- LCD, 800×480 resolution | |
Signal mode | NTSC/PAL (Auto adapt) | |
Video IN | BNC (Analog/AHD/TVI/CVI) signal input | |
VIDEO TEST | ||
CVBS Test | YES | |
AHD TVI CVI Test | 720P/1080P 3MP/4MP/5MP/8MP | |
UTC OSD control | UTC control/call OSD menu | |
OTHER TEST | ||
Audio input test | YES | |
PIZ Controller | Support RS485,Compatible with protocols PELCO- D/P, Baud Rate 1200— 14400bps |
|
UTP Cable Tester | Enhanced UTP cable, with indicator light, the test distance can reach 100- 150 meters | |
POWER | ||
DC12V output | DC12V1A power Output | |
Power Adapter | DC 5V/1A Input | |
Battery | Built-in 3.7V 3000ma battery | |
Battery Life | 8 hours work after full charge (Without supplying power to external devices) | |
111- .:„, – | ||
Language | 12 Languages available | |
General | ||
Working Temperature | 10°C-+50°C | |
Working Humidity | 30% – 90% | |
Dimension/Weigh | 38mm x 103mm x 41 mm /0.5kg |
Documents / Resources
![]() |
PROVISION ISR TM-54In1-8 Service Color LCD Monitor [pdf] User Manual TM-54In1-8 Service Color LCD Monitor, TM-54In1-8, Service Color LCD Monitor, Color LCD Monitor, LCD Monitor, Monitor |