Setting up and start-up guide Neo PROWATCH +/2

FRONT VIEW

Trademark of the DVB – Digital Video Broadcasting Project

REAR VIEW

3. Power input connector
4. Fuses
5. Switch on-off button
6. IPTV (only available for PROWATCHNeo 2)
7. ASI input (only available for PROWATCHNeo 2)
8. ASI output (only available for PROWATCHNeo 2)
9. ETHERNET connector for (NetUpdate / Streaming VA / WebControl**)
10. USB connector
11. HDMI output
12. Video / Audio input
13. Reset / Updates button
14. RF input connector
* not included
** password : Password
Find the user’s manual on the download area at: www.promaxelectronics.com
USER MANUAL
DOWNLOADhttp://www.promax.es/downloads/manuals/Spanish/ranger-neo-2.pdf

LOAD DEFAULT CONFIGURATION

1. Update version to R29.9 or higher.
2. Prepare a TXT file with the name PROMAX_IP.txt and copy it to the root directory of a PENDRIVE.
3. Set the equipment in SERVICE MODE
4. 
5. 
6. The equipment restarts

SFTP ACCESS

CONNECTION IN REMOTE MODE AND ACCESS TO THE WEBCONTROL

WEB-CONTROL

CHANGE IP VIA WEBCONTROL

RECOMMENDED SETTINGS FOR MONITORING

CAUTION
Once recommended parameters have been configured, be sure to press “Save” to ensure that settings do not lose in case of disconnection or shutdown.
• TIME ZONE AND TIME CONFIGURATION
Recommended settings• NTP TIME SERVER SETTINGS
Recommended settings• TOOLS Moni. ddbb loc. Watchdog
• SMTP
• EQUIPMENT Company UserFind the user’s manual on the download area at: www.promaxelectronics.com

Documents / Resources

PROMAX PROWATCHNeo 2 Advanced Remote Monitoring System [pdf] Installation Guide PROWATCHNeo 2 Advanced Remote Monitoring System, PROWATCHNeo 2, Advanced Remote Monitoring System, Remote Monitoring System, Monitoring System

References

• User Manual