PROLIGHTS IP65 HaluStrip Duo User Manual

PROLIGHTS-LOGO

PROLIGHTS IP65 HaluStrip Duo

PROLIGHTS-IP65-HaluStrip-Duo-PRODUCT

Specifications

  • Product Name: HaluStrip Duo
  • Designed in Italy
  • Use: Professional
  • Manufacturer: PROLIGHTS

Product Usage Instructions

Safety Information

This product is designed for professional use only. Any other use not expressly indicated may compromise the product’s operation and pose a danger. Always adhere to national accident prevention rules and regulations for commercial use.

Key Features

  • 200W: 14x2700K 4° Beam + 3×42 RGBWW Pixels
  • Equipped with built-in retractable feet for floor positioning
  • Seamless modular frame for flat, hanging/ground, and on yoke configurations
  • DMX, RDM, sACN, Art-net, and RDMnet protocols supported
  • Available optional optics for beam LEDs – 12°, 24°
  • The HaluStrip DUO is a dual-layer LED strip that seamlessly integrates lighting and video capabilities into a modular design.
  • This twin-source unit offers high-power, long-throw white beams alongside high-brightness video and strobe features, with full pixel-level control.
  • This integration facilitates diverse and dynamic lighting setups, suitable for a variety of professional stages and TV applications.
  • Each unit of HaluStrip DUO comprises two distinct layers of light sources: 126 (3×42) RGB+WW pixels with a 120° beam spread, and 14 (1×14) WarmWhite 4° beam sources.
  • The total power draw is 170W, which can be distributed between either or both groups of light sources according to user preference.
  • Additionally, each emitter is individually pixel controllable, enabling the display of video content on either one or both sources. This offers exceptional brightness and unmatched colors.
  • The modular frame of HaluStrip DUO, akin to LED tile structures, allows seamless interlocking of multiple units. This maintains a consistent pixel pitch across both source groups when using several devices.
  • The frame is designed for versatility, supporting various configurations such as flat or curved, hanging or ground stacking.
  • HaluStrip DUO also excels as an all-weather lighting solution. Its IP65-rated design ensures reliability and durability in both indoor and outdoor applications, protecting against water and dust.
  • In terms of connectivity, HaluStrip DUO comes with an integrated power supply and user interface. It supports a variety of lighting protocols, including DMX, RDM, sACN, Art-Net, and RDMnet, offering unparalleled flexibility for any setup.

LIGHT SOURCE

  • Light source: 1 x 14 4° 2700K LEDs + 3 x 42 120° RGB+WW LEDs
  • Luminous flux: 4’044 lm (total) @Full
  • Luminous flux: 3’871 lm (beam layer) | 3’114 lm (pixel layer) @Full
  • Lux: 7’673lx @5 m full
  • Lux: (beam layer) 14’519 lx | (pixel layer) 46lx @5 m full
  • CRI: (beam layer) > 81,6 @2700K; (pixel layer) 92,2 @3200K; 90 @5600K
  • R9: (pixel layer) 94,4 @3200K; 95,4 @5600K
  • Source life expectancy: > 30.000 h

OPTICS

  • Beam angle: (Beams) 4,9°; (Pixels) 111,5°
  • Field angle: (Beams) 7,4°; (Pixels) 151,3°
  • Additional optics: available optional optics for beam LEDs 12°, 24°
  • Other: Pixel pitch (BEAMs) 72 mm | (PIXELs) 24 mm

COLOUR SYSTEM

  • Colour mixing: (beam layer) Warm White (2700K), (pixel layer) RGB + Warm White
  • Macros: several pre-built pixel macros with adjustable speed

DYNAMIC EFFECTS

  • Control Resolution: 16-bit dimmer and color control
  • Pixel patterns: pre-programmed dynamic and static patterns
  • FX generator: adjustable foreground/background colour, index, speed, direction
  • Static mode: selection of static dimmer, colors, and color temperature

Product Description

PROLIGHTS-IP65-HaluStrip-Duo-FIG-18 PROLIGHTS-IP65-HaluStrip-Duo-FIG-19 PROLIGHTS-IP65-HaluStrip-Duo-FIG-20 PROLIGHTS-IP65-HaluStrip-Duo-FIG-21 PROLIGHTS-IP65-HaluStrip-Duo-FIG-22 PROLIGHTS-IP65-HaluStrip-Duo-FIG-23

Specifications

  • DMX channels: from 12 channels to 518-channel modular and user-customizable DMX architecture (MCA)
  • Pixel control: pixel2pixel control
  • Wireless Control: optional, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
  • RDM: for remote addressing and parameter configuration
  • Display: Graphic User Interface
  • Firmware upgrade: via DMX with UPBOXPRO (USB-DMX interface not included) or via Ethernet (Art-Net with DMX-Workshop)
  • Master/Slave: for synchronised operation of more units linked in a chain
  • EtherFlow: Ethernet pass-through switch that preserves network connectivity even when the fixture is unpowered

BODY

  • Bracket system: spigot for tripod use and bracket for truss rigging
  • Hardware on-board: on-board mechanics for modular assembly of multiple fixtures
  • Housing: Weatherproof IP65 construction with magnesium alloy
  • Finish: black
  • Curve configurations: optional mechanics (HSDUOCLS), -7,5° to +15°, adjustable in 2.5° steps

ELECTRONICS

  • Dimmer: linear 0 ~ 100% electronic dimmer
  • Dimmer curves: up to 6 independent selectable dimmer curves per source
  • Strobe/shutter: 1 – 30 Hz, electronic
  • Operating temperature: Ta -20 to +45 °C (-4 to +113 °F)
  • LED Control: flicker-free frequency with adjustable PWM
  • Selectable PWM: 600 to 25000 Hz (selectable steps)

ELECTRICAL

  • Mains power supply: 100-240V – 50/60Hz
  • Max power consumption: 170W
  • Standby power: 7,8 W
  • Output (at 230V): 14 units on a single power line
  • Output (at 120V): 7 units on a single power line
  • Power factor: > 0,94

PHYSICAL

  • IP rating: IP65 for temporary outdoor application, not for fixed installations
  • Cooling: fan-free with natural convection
  • Suspension and fixing: spigot for tripod use, bracket for truss rigging and hardware for connection of more units
  • Signal connection: IP65 Seetronic XLR 5p IN/OUT connectors
  • Data connection: Seetronic Ethernet IP in/out connectors
  • Power connection: Seetronic powerCON waterproof IN/OUT connectors
  • Dimensions (WxHxD): 1000 x 71 x 183mm / 39.37”x2.8”x7.2”
  • Weight: 8kg / 17.64lbs

CERTIFICATIONS / APPROVALS

  • Certifications / Approvals: CE, RCM, FCC, cTUVus

BOX CONTENT

  • 1 x HALUSTRIPDUO
  • 1 x 1,5 meters 3G1,5mmq power cable (BARE END – SEETRONIC IP65 power connector)
  • 1 x User Manual

INTRODUCTION

Thank you for choosing PROLIGHTS

  • Please note that every PROLIGHTS product has been designed in Italy to meet quality and performance requirements for professionals and is designed and manufactured for the use and application as shown in this document.
  • Any other use, if not expressly indicated, could compromise the good condition/operation of the prod-uct and/or be a source of danger.
  • This product is meant for professional use. Therefore, commercial use of this equipment is subject to the respective applicable national accident prevention rules and regulations.
  • Features, specifications, and appearance are subject to change without notice. Music & Lights S.r.l. and all affiliated companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss, or any other loss occasioned by the use of, inability to use, or reliance on the information contained in this document.
  • Product user manual can be downloaded from the website www.prolights.it, or can be inquired to the official PROLIGHTS distributors of your territory (https://www.prolights.it/sales_network.html).
  • Scanning the QR Code below, you will access the download area of the product page, where you can find a broad set of always updated technical documentation: specifications, user manual, technical drawings, photometrics, personalities, fixture firmware updates.

SAFETY INFORMATION

PROLIGHTS-IP65-HaluStrip-Duo-FIG-2WARNING!

  • See https://www.prolights.it/product/HALUSTRIPDUO#download for installation instruc-tions.
  • Please read carefully the instructions reported in this section before installing, powering, operating, or servicing the product, and observe the indications also for its future handling.
  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-3This unit is not for household and residential use, only professional applications.

Connection to mains supply

  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-4The Connection to the mains supply must be carried out by a qualified electrical installer.
  • Use only AC supplies 100-240V 50-60 Hz; the fixture must be electrically connected to ground (earth).
  • Select the cable cross-section according to the maximum current draw of the product and the possible number of products connected to the same power line.
  • The AC mains power distribution circuit must be equipped with magnetic+residual current circuit breaker protection.
  • Do not connect it to a dimmer system; doing so may damage the product.
  • The product has XLR sockets for DMX input and output.
  • Connection of the control signal: DMX LINE.
  • Notice: this control circuit is not isolated.
  • Cumulative leakage current of less than 3.5mA on the control circuit.

Protection and Warning against Electrical Shock

  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-4Do not remove any cover from the product; always disconnect the product from AC power before servicing.
  • Ensure that the fixture is electrically connected to ground (earth). And use only a source of AC power that complies with local building and electrical codes and has both overload and ground-fault (earth-fault) protection.
  • Before using the fixture, check that all power distribution equipment and cables are in perfect condition and rated for the current requirements of all connected devices.
  • Isolate the fixture from power immediately if the power plug or any seal, cover, cable, or other components are damaged, defective, deformed, or showing signs of overheating.
  • Do not reapply power until repairs have been completed.
  • Refer any service operation not described in this manual to the PROLIGHTS Service team or an authorized PROLIGHTS service center.

Installation

  • Make sure that all visible parts of the product are in good visible condition before its use or installation.
  • Make sure the point of anchorage is stable before positioning the projector.
  • When suspending the fixture above ground level, secure it against failure of primary attachments by attaching a safety cable that is approved as a safety attachment for the weight of the fixture to the attachment point on the main frame of the product.
  • In case the safety cable is in action, it needs to be replaced with a new one.
  • Install the product only in well-ventilated places.
  • For non-temporary installations, ensure that the fixture is securely fastened to a load-bearing surface with suitable corrosionresistant hardware.
  • For a temporary installation with clamps, ensure that the quarter-turn fastener and/or screws are turned fully and secured with a suitable safety cable.
  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-24Minimum distance of illuminated objects
    • The projector needs to be positioned so that the objects hit by the beam of light are at least 0.5 meters (1.64 ft) from the lens of the projector.
  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-7Max operating ambient temperature (Ta)
    • Do not operate the fixture if the ambient temperature (Ta) exceeds 45 °C (113 °F).
  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-7Minimum operating ambient temperature (Ta)
    • Do not operate the fixture if the ambient temperature (Ta) is below -20 °C (-4 °F).
  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-8Protection from burns and fire
    • The exterior of the fixture becomes hot during use. Avoid contact with persons and materials.
    • Ensure that there is free and unobstructed airflow around the fixture.
    • Keep flammable materials well away from the fixture
    • Do not expose the front glass to sunlight or any other strong light source from any angle. Lenses can focus the sun’s rays inside the fixture, creating a potential fire hazard.
    • Do not attempt to bypass thermostatic switches or fuses.
  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-9Permanent Outdoor use
    • This product is rated with an IP (Ingress Protection) for permanent outdoor use when used and serviced according to the instructions contained in this document.
    • Never use the fixture in places subject to vibrations or bumps.
    • Make certain that no inflammable liquids, water, or metal objects enter the fixture.
    • Excessive dust, smoke, fluid, and particle build up degrades performance, cause overheating, and damage the fixture.
    • Damages caused by inadequate cleaning or maintenance are not covered by the product warranty.
  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-10Temperature of the external surface
    • The surface of the fixture can reach up to 70 °C (158 °F) during operation. Avoid contact with people and materials.

Maintenance

  • Warning! Disconnect the fixture from AC mains power and allow it to cool for at least 10 minutes before handling.
  • Only technicians who are authorized by PROLIGHTS or Authorised service partners are permitted to open the fixture.
  • Users may carry out external cleaning, following the warnings and instructions provided, but any service operation not described in this manual must be referred to a qualified service technician.
  • Important! Excessive dust, smoke, fluid, and particle build up degrades performance, cause overheating, and will damage the fixture. Damages caused by inadequate cleaning or maintenance is not covered by the product warranty.

PROLIGHTS-IP65-HaluStrip-Duo-FIG-11Photobiological safety

  • This device emits potentially dangerous optical radiation and is identified in the category of Risk Group 2 according to EN 62471.

PROLIGHTS-IP65-HaluStrip-Duo-FIG-12Do not stare at the operating light source

  • Do not look directly at the LED source during operation. It can be harmful to the eyes and skin.
  • During Installation, operation, and maintenance, be prepared for the fixture to light and move suddenly when connected to power.
  • The device should be positioned so that prolonged staring into the luminaire at a distance closer than 12,2 m (40,03 ft) is not expected.PROLIGHTS-IP65-HaluStrip-Duo-FIG-13

Disposal

  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-14This product is supplied in compliance with European Directive 2012/19/EU – Waste Electrical and Electronic Equipment (WEEE).
  • To preserve the environment, please dispose/ recycle this product at the end of its life according to local regulations.

The products to which this manual refers comply with:

  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-152014/35/EU – Safety of electrical equipment supplied at low voltage (LVD).
  • 2014/30/EU – Electromagnetic Compatibility (EMC).
  • 2011/65/EU – Restriction of the use of certain hazardous substances (RoHS).

The products to which this manual refers comply with:

  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-16UL 1573 + CSA C22.2 No. 166 – Stage and Studio Luminaires and Connector Strips.
  • UL 1012 + CSA C22.2 No. 107.1 – Standard for power units other than class 2.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference,
  2. This device must accept any interference received, including interference that may cause undesired operation.

Other approvals

  • PROLIGHTS-IP65-HaluStrip-Duo-FIG-17The product meets the safety requirements of the certification procedures of the market in which it is placed and sold.

CUSTOMER SERVICE

FAQs

Can this product be used for household purposes?

No, this product is designed for professional applications only and should not be used in households.

What is the IP rating of this product?

The product has an IP65 rating, indicating protection against dust and water jets.

Documents / Resources

PDF thumbnailIP65 HaluStrip Duo
User Manual · IP65 HaluStrip Duo, IP65, HaluStrip Duo, Duo

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.