PROLED LPLCPX24 LED CTRL DIN Rail Mounting Bracket
Characteristics
- 24 Art-NET or sACN Universes
- 4 Pixel-Outputs
- Support for more than 50+ Pixel protocols
- Ambient temperature -10° C till +40° C
- Configuration over Web Browser or LED CTRL Software.
- Intelligent electronic fuses at Pixel-Outputs
- Current control at all Pixel-outputs
- Dual-Gigabit Ethernet Port
- micro SD-card slot for recording and playback
Warnings
- For indoor use only
- Please ensure that the packaging is disposed of in a safe environment
- We do recommend that a qualified electrician should be used to install the products
Safety Indices
Be sure to have a qualified electrician complete installation. The manufacturer is then discharged from liability when damage is caused by improper use or installation. If any controller is subsequently modified, the person responsible for the modification shall be considered as manufacturer. For indoor use only. Protection class IP20.
Installation
- Controller can be installed directly on a wall or with optional DIN-RAIL-fixings on a DIN-RAIL
- Please take care about correct wiring of the connectors according to used Digital-Strip
- Please take care about the max. possible load and the max. ambient temperature.
- Connect 5 – 24 VDC power supply unit.
Technical Data
| Pixel Outputs | 4x with power supply | Pixel amount RGB | 1020 / 510 |
| Power supply | 5 – 24 VDC | Pixel amount RGBW | 768 / 384 |
| Output current | 7 A per output | Universes per output | 6 / 3 |
| Complete current | 28 A | Pixel universes total | 24 / 24 |
| Ambient temp | -20 – 55 °C |
Dimensions
Connection diagram
Connections to pixel
Customer Support
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg – Germany
www.proled.com
Documents / Resources
 |
PROLED LPLCPX24 LED CTRL DIN Rail Mounting Bracket [pdf] Installation Guide LPLCPX24, LPLCPX24 LED CTRL DIN Rail Mounting Bracket, LED CTRL DIN Rail Mounting Bracket, CTRL DIN Rail Mounting Bracket, DIN Rail Mounting Bracket, Rail Mounting Bracket, Mounting Bracket |