ProxerPort 1 Swivel Barrier Gate
“
Specifications:
- Gate Type: Manual Swivel Barrier
- Material: Stainless Steel with Polished Finish
- Passage Width: 1100mm (Customizable between 700mm and
1200mm) - Access Control: One or Bidirectional
- Features: Suitable for Wheelchair Access, CE Certified,
Hungarian Product
Product Usage Instructions:
Installation:
- Choose the appropriate ProxerPort1 model based on your
requirements. - Install the gate in the desired location ensuring proper
alignment and stability. - Customize the passage width if necessary within the specified
range.
Operation:
Depending on the model, operate the gate as follows:
- ProxerPort1: Manually grant free passage for
one or bidirectional entry. - ProxerPort1-U: Manually open with spring
kickback for one-directional access. - ProxerPort1-Z: Manually open and close for
bi-directional access; can be locked with a key.
FAQ:
Q: Can the gate be integrated into an access control
system?
A: Yes, models like ProxerPort1-M and ProxerPort1-M-U can be
integrated with a card reader for controlled access.
Q: Is the passage width customizable?
A: Yes, the default width is 1100mm, but it can be customized
between 700mm and 1200mm.
Q: What materials are used in the construction?
A: The gate is primarily made of stainless steel with a polished
finish for durability and aesthetics.
“`
ProxerPort 1
ProxerPort 1
Manual swivel barrier gate for access with reduced mobility
The ProxerPort1 is a manually operated mechanical access gate for one or bidirectional entry. The tubular swivel barrier is made of stainless steel with polished finish. Passage width is 1100 mm, which is suitable for wheelchair access. It can be ordered with unique passage width between 700 and 1200mm.
Types are differentiated by the way of closing and controllability. The types equipped with magnet can be integrated into building surveillance system with access control terminals and readers and the ProxerNet software. The person holds the proximity card to the reader, and if they have the right to access, the magnetic lock releases the gate and it can be opened once. The gate can be reopened only after presenting a valid card again. Opening command may arrive from a reader of the access control system, a door opening button or a remote control.
The column and the wing are made of stainless steel with polished finish. Information and caution board can be fixed on the swing gate; barriers from the same material can be chosen for a complete solution.
In case of emergency the ProxerPort1-M, 1-M-U, 1D-M-U, 1-M-R-U gates automatically, the ProxerPort1, 1-U, 1-P gates manually grant free passage, thus they can be built into route.
Properties
Gate is suitable for disabled access mechanical gate (for motorized version please check
ProxerPort 2) tubular structure from polished stainless steel one or bidirectional access control passage width 1100 mm by default
PROCONTROL Electronics Ltd. www.procontrol.hu
page 1/ 7
CE certified product Hungarian product for supermarkets, stores as well
Types
ProxerPort1 Mechanical gate, manual opening and closure With mechanical bumper one directional Lock mechanism: not included
ProxerPort1-U Mechanical gate: manual opening, spring kickback With mechanical bumper one directional Lock mechanism: not included
ProxerPort1-Z Mechanical gate, manual opening and closure Bi-directional opening Lock: can be opened with key
ProxerPort1-P Mechanical gate, manual opening and closure Can be opened by pulling up the arm on the column Lock mechanism: not included Can be set as one-directional with inner bumper
ProxerPort 1
PROCONTROL Electronics Ltd. www.procontrol.hu
page 2/ 7
ProxerPort1-M Mechanical gate, manual opening and closure Lock mechanism: remotely controlled 12V flat adhesive lock, can be opened automatically One-directional Can be integrated into access control system (e.g. with card reader)
ProxerPort1-M-U Mechanical gate: manual opening, spring kickback Lock mechanism: remotely controlled 12V flat adhesive lock, can be opened automatically One- directional Can be integrated into access control system (e.g. with card reader)
ProxerPort 1D-M-U bidirectional version of ProxerPort 1-M-U
ProxerPort1-M-R-U
Mechanical gate: spring opening, manual closure Lock mechanism: remotely controlled, 12 V reverse flat
adhesive magnetic lock on the column, can be opened automatically Operation mode: the gate is closed by default, the spring is strung, the magnetic lock keeps it closed. Opening: when command arrives from access control system or at fire alarm or power outage, the lock releases and the spring automatically opens the wing of the gate in the way of the escape route. The wing gets fixed in this opened state. With a smaller effort the gate can be closed and the magnet locks it. One-directional It can be integrated into access control system (e.g. with RFID reader)
ProxerPort 1
PROCONTROL Electronics Ltd. www.procontrol.hu
page 3/ 7
ProxerPort 1
Options:
Right-handed or left-handed With unique wing size Barriers in distinct format and design Can be set as one-directional with bumper Lock mechanism: remotely controlled 12V flat adhesive
magnetic lock or lock with keys Spring kickback Automatic opening; into escape routes with reverse
spring-driven opening Glass clamp set can be ordered: in the inner part of the
polished stainless steel tubular wing 4 clamps are placed, fixing the glass or polycarbonate loose sheets. Vise grips can be removed from one side and the sheet can be placed. Information and caution signs Fitting to fix the companion part of the electromagnetic lock ER opening (at M types)
Certificates
Fire Prevention Certificate of Compliance: The access gates grant free pass or open way automatically or manually, thus it can be built into escape route.
The product has been examined by the fire-control laboratory of the ÉMI Ltd.; it has Fire Prevention Certificate of Compliance, and certificate of professional institution ÉMI licence number: TMI-7/2014
MABISZ (Association of Hungarian Insurance Companies) gave product compliance recommendation onto the intrusion prevention devices of Procontrol: ProxerNet, software system, Proxer card reader; Workstar access and attendance control terminal family; a ProxerGate and ProxerPort access gate family. The MABISZ suggests its members accept these Procontrol products.
PROCONTROL Electronics Ltd. www.procontrol.hu
page 4/ 7
ProxerPort 1
PROCONTROL Electronics Ltd. www.procontrol.hu
page 5/ 7
ProxerPort 1
PROCONTROL Electronics Ltd. www.procontrol.hu
page 6/ 7
ProxerPort 1
PROCONTROL Electronics Ltd. www.procontrol.hu
page 7/ 7
Documents / Resources
 |
PROCONTROL ProxerPort 1 Swivel Barrier Gate [pdf] Instruction Manual ProxerPort1, ProxerPort1-U, ProxerPort1-Z, ProxerPort1-P, ProxerPort 1 Swivel Barrier Gate, ProxerPort 1, Swivel Barrier Gate, Barrier Gate, Gate |