P-FXFS-01 Flex Lift Folding Camera Stand
“
Product Information
Specifications:
- Product Name: FlexLift Folding Camera Stand (P-FXFS-01)
- Height Adjustment: 23 inches to 60 inches
- Features: Flexible Positioning, Dynamic Angles
Product Usage Instructions
1. Stand Setup:
Assemble the Proaim FlexLift Folding Camera Stand according to
the provided instructions.
2. Camera Mounting Setup:
Mount your camera securely onto the stand using the provided
screw and tighten it using the Allen Key (Size: 5mm).
3. Phone Holder/Adapter Setup:
Attach the iPhone Adapter to the stand for holding your phone
securely during recording.
4. Adjustments & Folding:
Adjust the height of the stand as needed, ranging from 23 inches
to 60 inches. Utilize the flexible positioning and dynamic angles
for capturing different shots.
FAQ
Q: Can I use this stand with cameras other than iPhones?
A: Yes, the stand can be used with various camera models by
securely mounting them onto the stand.
Q: Are additional accessories required for using this
stand?
A: The stand comes with the necessary accessories for basic
setup, but optional accessories can be added for enhanced
functionality.
“`
1
FlexLift Folding Camera Stand for Videographers & Content Creators (P-FXFS-01)
All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable
copyright statutes or in writing by the Publisher.
2
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
iPhone Adapter
1 x Allen Key (Size: 5mm)
Proaim FlexLift Folding Camera Stand
FlexLift Stand Setup
· Hold the FlexLift stand and gently pull it upwards.
· While opening, place your foot on the middle leg for stability and continue pulling upward until fully opened.
· The stand is now ready for use.
Camera Mounting Setup
3
· Loosen the 1/4″-20 screw on the top mount. · Securely attach your camera (not included)
onto the screw and tighten it.
· The camera is now securely mounted onto the stand.
· To detach the camera, loosen the screw and carefully remove it.
Phone Holder/Adaptor Setup
· Loosen the 1/4″-20 screw, attach the phone holder/adapter to the stand, and securely tighten the screw.
· Open the adapter slightly and insert your phone (not included).
· To remove, loosen the screw and detach the adapter from the stand.
Adjustments & Folding
4
· Use the included 5mm Allen key to tighten or loosen stand joints as needed.
· To fold the stand, push it inward from the joint sections.
· Finally, press the black button located on the leg and push it downwards to collapse and lock the stand into its folded position.
Height Adjustable from 23″ To 60″
Flexible Positioning & Dynamic Angles
60″ 23″
5
PROAIM FLEXLIFT FOLDING CAMERA STAND FOR VIDEOGRAPHERS & CONTENT CREATORS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer a one-year warranty on our products from the date of purchase. During this period, we will repair the product free of charge for labor or parts. The warranty does not cover transportation costs or products that have been misused or accidentally damaged. All warranty repairs are subject to inspection and evaluation by our team. Liability: We are not liable for any damage caused by third-party products, mishandling during transit, accidents, misuse, neglect, or unauthorized servicing of the product. Contact Us: In case of any dissatisfaction, please contact us immediately. We are committed to providing the utmost support and care to ensure your satisfaction with our product.
Documents / Resources
 |
PROAIM P-FXFS-01 Flex Lift Folding Camera Stand [pdf] User Guide P-FXFS-01 Flex Lift Folding Camera Stand, P-FXFS-01, Flex Lift Folding Camera Stand, Lift Folding Camera Stand, Folding Camera Stand, Camera Stand |