Pro-Ject T1 Turntable Player User Guide

Contents hide

1 Pro-Ject T1 Turntable Player

2 INTRODUCTION

3 How to connect your model and possible setups

4 Warranty

5 Documents / Resources

5.1 References

6 Related Posts

Pro-Ject T1 Turntable Player

Getting started

Make sure to have enough space to unpack your turntable.
Always unpack and set up in a clean enviroment.

Please Do NOT throw away the packaging! If you need a service or want to return your product, please send them in the original packaging including all inserts. In case of any damage in another packaging your dealer cannot guaran-tee a full refund.
Complete manual:
https://www.project-audio.com/en/product/t1

INTRODUCTION

Unpack all items from accessory bag.
1. Connect it E (RCA cable)
  Detachable cable only included with T1 Phono SB & T1 BT
2. Drive belt
3. Stylus pressure gauge
  1. Adapter for 7“ singles
Remove dust cover carton from the box.

Lift the wrapped turntable out of the box.
4 Remove the protection covering.

Unpack the power supply.
Unpack the platter.

Put the drive belt on the pulley & sub-platter.
Put the platter on the turntable.

Put the felt mat on the platter.
Remove tonearm twist tie.

Connect to your hifi-system and enjoy your music!

How to connect your model and possible setups

T1
Connect to any amp with integrated phono amplifier or use an external phono preamp.
Pre-mounted Connect it E (RCA cable) included.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and Pro-Ject MaiA (stereo integrated amplifier).

T1 Phono SB
Select Line Out to connect to an amplifier without a phono stage. Select Phono Out if you have an amplifier with a phono stage.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and Pro-Ject Stereo Box (stereo integrated amplifier).

T1 BT
Select Line Out to connect to an amplifier without a phono stage. Select Phono Out if you have an amplifier with a phono stage. Enjoy the warmth of vinyl with the comfort of wireless technology.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and Pro-Ject Stereo Box (stereo integrated amplifier).

Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country.
Warranty repairs will only be affected if the unit is returned correctly packaged. For this reason we recommend keeping the original packaging. Never return a record player without making sure that is it safely disassembled and correctly packaged in the original packaging.
Please remove these parts and pack them separately: lid, counterweight, anti-skating weight and belt.
Fit the cartridge protection cap and the transport lock for the tonearm tube, prior to carefully packaging the record player.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the original packaging. Modification or change to any part of the product by unauthorized persons, release the manufacturer from any liability over and above the lawful rights of the customer.

Warranty: Terms and Conditions

A warranty is valid only for products purchased from an authorized Pro-Ject Audio Systems retailer or dealer.

This warranty offer is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which affects your original warranty).
Neither transportation or any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty.

A warranty is only valid for the original owner. It is not transferable.
To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.

Warranty must be claimed within two years of purchase from an authorized dealer. After this period of time, the warranty will expire.
The legal warranty obligation exists in addition to this warranty and is not limited by this warranty.
A Pro-Ject Audio Systems warranty relates to claims of defects in materials and/or workmanship at the time of purchase. It does not cover:
Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads, drive belts and cartridges.
Damages caused by incorrect installation, connection or packing.
Damages caused by any use other than the correct use described in the user manual, negligence, modifications, or use of parts that are not made or authorized by Pro-Ject Audio Systems.
Damages caused by faulty or unsuitable ancillary equipment.
Damages caused by accidents, lightning, water, fire heat, war, public disturbances or any other cause beyond the reasonable control of Pro-Ject Audio Systems and its appointed distributors.
Products where the serial number has been altered, deleted, removed or made illegible.
Repairs or modifications that have been executed by an unauthorized person.

Commercial Use

Faults caused due to using domestic products in commercial environments or on commercial scales are not covered by warranty. This turntable is intended for domestic use only. Using them for business applications are done so at your own risk.

Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

The information was correct at the time of going to press. The manufacturer reserves the right to make changes to the technical specification wit-hout prior notice as deemed necessary to uphold the ongoing process of technical development.

Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.

Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Tech-nologies International, Ltd., registered in the United States and other countries.