PrimeLight-logo

PrimeLight VoxBox Air VB3-2001 Interviewer Kit

PrimeLight-VoxBox-Air-VB3-2001-Interviewer-Kit-product-image

Product Information

Specifications:
  • Model: VB3-2001
  • Manufacturer: primelightdesign.co.uk
  • Components:
    1. Beamsplitter glass
    2. Foam packing pad (2 pieces)
    3. Side mirror
    4. Main unit with tablet mounting slot
    5. 16mm adaptor
    6. L-bracket
    7. Tablet holder
    8. Filter trays (4X4 & 4X5.6 PV)
    9. Neoprene doughnuts (3 pieces)

Product Usage Instructions

Packing Order and Parts:

  1. Check all parts listed in the packing order list.
  2. Note the orientation of the tablet mounting slot (A) on the main unit.

Assembly:

  1. Remove the L-bracket if using it by pushing the quick release buttons and pulling it to release.

Mounting Options:

  1. Use the L-bracket for 15mm rails or the 16mm adaptor for a light stand.

Glass Fitting:
Follow the instructions provided for fitting the beamsplitter glass.

Configuration:
Choose the appropriate configuration with or without the side mirror based on the viewing perspective (interviewer or subject).

FAQ:

  • Q: Can I use the product without the side mirror?
    A: Yes, the product can be used both with and without the side mirror depending on the viewing perspective.

Quick Start
ALWAYS READ THE FULL OPERATING INSTRUCTIONS BEFORE USE

SCAN FOR SETUP VIDEO
primelightdesign.co.uk

PrimeLight-VoxBox-Air-VB3-2001-Interviewer-Kit- (1)

Packing order and parts

  1. Beamsplitter glass
  2. Foam packing pad
  3. Side mirror
  4. Foam packing pad
  5. Main unit – note the orientation of the tablet mounting slot (A)- it must be facing you when packing.
  6. 16mm adaptor
  7. L-bracket
  8. Tablet holder
  9. Filter trays (4X4” & 4X5.6” PV)
  10. Neoprene doughnuts x 3

PrimeLight-VoxBox-Air-VB3-2001-Interviewer-Kit- (2)

Assembly

PrimeLight-VoxBox-Air-VB3-2001-Interviewer-Kit- (3)

Mounting options

PrimeLight-VoxBox-Air-VB3-2001-Interviewer-Kit- (9)

Collapse/fold

PrimeLight-VoxBox-Air-VB3-2001-Interviewer-Kit- (4)

Remove the L-bracket (if using): Push quick release buttons (1) and pull the L-bracket (2) to release. PrimeLight-VoxBox-Air-VB3-2001-Interviewer-Kit- (5)

Glass fitting

PrimeLight-VoxBox-Air-VB3-2001-Interviewer-Kit- (6)

Configuration with side mirror

PrimeLight-VoxBox-Air-VB3-2001-Interviewer-Kit- (7)

  • Correct side mirror position for interviewer point of view
  • Correct side mirror position for subject point of view.

Configuration without side mirror PrimeLight-VoxBox-Air-VB3-2001-Interviewer-Kit- (8)

  • Correct position for interviewer point of view
  • Correct position for subject point of view.

Documents / Resources

PrimeLight VoxBox Air VB3-2001 Interviewer Kit [pdf] Installation Guide
VB3-2001, VoxBox Air VB3-2001 Interviewer Kit, VoxBox Air VB3-2001, VoxBox Air, Interviewer Kit, Kit

References

Leave a comment

Your email address will not be published. Required fields are marked *