PPI Scanex Plus 8-16 Channel Universal Process Scanner
101, Diamond Industrial Estate, Navghar,
Vasai Road (E), Dist. Palghar – 401 210.
Sales : 8208199048 / 8208141446
Support : 07498799226 / 08767395333
E: sales@ppiindia.net, support@ppiindia.net
This brief manual is primarily meant for quick reference to wiring connections and parameter searching. For more details on operation and application; please log on to www.ppiindia.net
| TABLE- 1 | |||
| Unit Readout | Units | ||
 |
°C | ||
 |
°F | ||
 |
Kelvin | ||
 |
Engineering Units | ||
 |
Percentage | ||
 |
Pascals | ||
 |
Mpascals | ||
 |
Kpascals | ||
 |
Bar | ||
 |
Milli bar | ||
 |
PSI | ||
 |
kg/sq cm | ||
 |
mm water gauge | ||
 |
Inches water gauge | ||
 |
mm mercury | ||
 |
Torr | ||
 |
Liters per hour Liters per minute % Relative Humidity % O2 % CO2 % Carbon Potential volts Amps |
||
 |
Milli amps | ||
 |
Milli Volts | ||
 |
Ohms | ||
 |
Parts per million | ||
 |
Revolutions per pinute | ||
 |
Milli seconds | ||
 |
Seconds | ||
 |
Minutes | ||
 |
Hours | ||
 |
PH | ||
 |
%PH | ||
 |
Miles per hour | ||
 |
Milli grams | ||
 |
Grams | ||
 |
Kilo grams | ||
| TABLE- 2 | ||
| Option | Range (Min. to Max.) | Resolution |
 J Type T/C |
0.0 to +960.0°C / +32.0 to +1760.0°F | 1 °C/°F or 0.1 °C/°F |
 K Type T/C |
-200.0 to +1376.0°C / -328.0 to +2508.0°F | |
 T Type T/C |
-200.0 to +387.0°C / -328.0 to +728.0°F | |
 R Type T/C |
0.0 to +1771.0°C / +32.0 to +3219.0°F | |
 S Type T/C |
0.0 to +1768.0°C / +32.0 to +3214.0°F | |
 B Type T/C |
0.0 to +1826.0°C / +32.0 to +3218.0°F | |
 N Type T/C |
0.0 to +1314.0°C / +32.0 to +2397.0°F | |
 |
Reserved for customer specific Thermocouple type not listed above. The type shall be specified in accordance with the ordered (optional on request) Thermocouple type. | |
 3-wire, RTD Pt100 |
-199 to +600°C / -328 to +1112°F or -199.9 to +600.0°C / -328.0 to +1112.0°F |
1 °C/°F or 0.1 °C/°F |
 0 to 20mA DC current |
-19999 to 30000 units | 1 0.1 0.01 0.001 units |
 4 to 20mA DC current |
||
 0 to 80mV DC voltage |
||
 Reserved |
||
 0 to 1.25VDC voltage |
||
 0 to 5.0VDC voltage |
||
 0 to 10.0VDC voltage |
||
 1 to 5.0VDC voltage |
||
FRONT PANEL LAYOUT
ELECTRICAL CONNECTIONS
Keys Operation
| Symbol | Key | Function |
 |
PAGE | Press to enter / exit Set-up Mode |
 |
DOWN | Press to decrease the parameter value. Pressing once decreases the value by one count; holding the key pressed speeds up the change. |
 |
UP | Press to increase the parameter value. Pressing once increases the value by one count; holding the key pressed speeds up the change. |
 |
ENTER | Press to store the set parameter value and to scroll to the next parameter. |
 |
ALARM ACK/VIEW | Press to Acknowledge any pending Alarm(s) and to View details of the channels under Alarm. |
 |
AUTO / MANUAL | Press to toggle between Auto and Manual Scan Mode. In Manual Scan Mode, Use UP / DOWN keys to the desired channel. |
PV Error Indications
| Message | PV Error Type |
 |
Over-range (PV above Max. Range) |
 |
Under-range (PV above Min. Range) |
 |
Open (Sensor open / broken) |
ELECTRICAL CONNECTIONS
Old Connections Version
8 Channel
16 Channel
New Connections Version
Documents / Resources
 |
PPI Scanex Plus 8-16 Channel Universal Process Scanner [pdf] Instruction Manual Scanex Plus 8-16 Channel Universal Process Scanner, Scanex Plus, 8-16 Channel Universal Process Scanner, Universal Process Scanner, Process Scanner, Scanner |
