PowMr HVM-P1 Wifi Module Wireless Device

Packing Accessories Detail

• P-1 WIFI Modular；
• P-2 Communication cable；
• P-3 Instruction book；

Installation Steps

1. Plug antenna into WIFI box body；
2. Plug communication cable into WIFI Modular；
3. Plug the communication cable RJ45 head into the inverter RS232 port( RJ45 Port Type)；

Wireless Router Connection

Download APP

1. Scan the QR Code on the right side and download the APP
   

Connect Wi-Fi Datalogger

1. Select the same number of Wi-Fi Plug Pro PN to connect on your phone WLAN. (InitialPassword:12345678)
2. Open the APP, tap the Wi-Fi Config button to enter this page.

Network Setting

1. Then tap the Network Setting button.
2. According to the prompts, type in the information to finish the network setting.
3. After the Wi-Fi Plug Pro is restarted, reconnect the Wi-Fi which connected by step 2.1.

Create Account And Add Datalogger

Create Account

1. Open the APP, tap the Register button to enter this page.
2. According to the prompts, type in the information to create an account.

Add Datalogger

1. Login the account and click the Datalogger button. Tap the “+” button on the top-right corner of the Datalogger page.
2. Scan the PN on the Wi-Fi Plug Pro, or input it manually.
3. According to the prompts, type in the information to finish add datalogger.

Documents / Resources

PowMr HVM-P1 Wifi Module Wireless Device [pdf] Installation Guide HVM-P1, Wifi Module Wireless Device, Wireless Device, Wifi Module Wireless, Module Wireless, Wifi Module, Module

References

• User Manual