POWERPLUS Bird Feeder Instruction Manual

GATHER YOUR RECLAIME1 CUT FOUR

BOARDS TO THE SAME LENGTH WOOD.

AND WIDTH.
SAND DOWN THE EDGES TO AVOID SPLINTERS.
ASSEMBLE THE FRAME WITH SCREWS.

DRILL PILOT HOLES TO PREVENT THE WOOD FROM SPLITTING.
CUT TWO BOARDS FOR THE RAISED EDGES…

ONE SHOULD BE SLIGHTLY WIDER, SO ADD THE THICKNESS OF THE BOARD TO ITS WIDTH.
AND ATTACHTHEM TO THE BASE.

CUT TWO TRIANGULAR PIECES.

AND SCREW THEM DOWN ONTO THE RAISED EDGES.