Power-Technologies-logo

Power Technologies AC-STAND-75 Interactive Flat Panel Stand, Cart

Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-1

Product Information

Specifications:

  • Model: AC-STAND-75
  • VESA Dimensions Adjustable Mounting Brackets (mm): 400×200, 400×400, 600X200, 600X400, 800X400
  • Exterior Dimensions: 17 (D) x 37.75 (W) & 70.25 (H) Inch, 432 (D) x 959 (W) & 1784 (H) mm
  • Product Weight (Weight Without Devices): 62 lbs (28 kg)
  • Shipping Weight: 70 lbs (31.6 kg)
  • Maximum Display Size Supported: supports up to 75 inch (1905 mm)
  • Supported Devices: Wall mount televisions and flat panels
  • Casters: Four 4 Casters; 2-Locking, 2-Directional
  • Work Platform Loading: 200 lbs (90.7 kg)
  • Storage RH%: 5% – 95%
  • Warranty: Lifetime Frame, 2 Years Components

Product Usage Instructions

Installation Instructions:

  1. REMOVING FROM BOX
    • Step-1: Remove the strapping with scissors or plier cutters. Do not use a box cutter.
    • Step-2: Lift and Remove the top cardboard lid.
    • Step-3: Your Stand arrives in 1 box and contains 4 layers for ease of assembly.
  2. Identifying Parts
    • Carefully remove all parts from box.
    • Locate the bag of hardware as this will be needed throughout the installation.
    • Lay parts out on a flat surface.
    • Ensure no parts are missing.
  3. SETTING UP STAND
    • Step-1: Place the Base on a flat surface.
    • Step-2: Find the Uprights and ensure the holes are on the outside.
    • Step-3: Slide both left and right Uprights into the Base’s posts.
    • Step-4: Loosely fit the screws connecting the left and right uprights to the base of the stand. Do not fully tighten hardware at this point.

FAQ

  • What is the maximum display size supported by AC-STAND-75?
    The AC-STAND-75 supports displays up to 75 inches (1905 mm).
  • What is the warranty coverage for the AC-STAND-75?
    The AC-STAND-75 comes with a lifetime frame warranty and a 2-year components warranty.
  • How much weight can the work platform of AC-STAND-75 support?
    The work platform of AC-STAND-75 can support up to 200 lbs (90.7 kg).

Product Information

The AC-STAND-75 is designed to fit interactive flat panel displays up to 75 inches. Please review this guide to learn how to safely use your product.

Specifications:

Model AC-STAND-75
VESA Dimensions

Adjustable Mounting Brackets (mm)

400×200, 400×400, 600X200, 600X400, 800X400
 

 

Exterior Dimensions

Inch 17 (D) x 37.75 (W) & 70.25 (H)
mm 432 (D) x 959 (W) & 1784 (H)
Product Weight

(Weight Without Devices)

62 lbs (28 kg)
Shipping Weight 70 lbs (31.6 kg)
Maximum Display Size Supported supports up to 75 inch (1905 mm)
Supported Devices Wall mount televisions and flat panels
Power Specifications NA
Charging Type NA
Security NA
Casters Four 4” Casters; 2-Locking, 2-Directional
Work Platform Loading 200 lbs (90.7 kg)
Working Temperature NA
Working RH% NA
Storage Temperature NA
Storage RH% 5% – 95%
Warranty Lifetime Frame, 2 Years Components

Overview

  • The AC-STAND-75 is designed to fit interactive flat panel displays up to 75 inches.
  • Please review this guide to learn how to safely use your product.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-2

  • If the device (Laptop / Chromebook) thickness is more than the gap between the dividers, remove one of the dividers to create enough space for your device.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-3

Installation Instructions

REMOVING FROM BOX

  • Step-1: Remove the strapping with scissors or plier cutters. Do not use a box cutter.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-4

  • Step-2: Lift and Remove the top cardboard lid

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-5

  • Step-3: Your Stand arrives in 1 box and contains 4 layers for ease of assembly.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-6

Identifying Parts

  1. Carefully remove all parts from box.
  2. Locate the bag of hardware as this will be needed roughout the installation.
  3. Lay parts out on a flat surface (see below).
  4. Ensure no parts are missing.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-7

Installation Instructions

SETTING UP STAND :

  • Step-1: Place the Base on a flat surface.
  • Step-2: Find the Uprights and ensure the holes are on the outside.
  • Step-3: Slide both left and right Uprights into the Base’s posts.
  • Step-4: Loosely fit the screws connecting the left and right uprights to the base of the stand. Do not fully tighten hardware at this point.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-8

  • Step-5: Find the Middle Shelf.
  • Step-6: Slide it in place so the notches are toward the long (back) edges of the Uprights.
  • Step-7: Loosely fit the screws on the outside of the left and right uprights to connect the middle shelf. Do not fully tighten hardware at this point.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-9

  • Step-8: Find the Left and Right Upper Pillars.
  • Step-9: Fit them into the Uprights so the 4 holes are facing the sides.
  • Step-10: Loosely fit the screws connecting the left and right upper pillars to the uprights. Do not fully tighten hardware at this point.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-10

  • Step-11: Find the Backplate.
  • Step-12: Facing the back of the stand, Fit the Backplate onto the Uprights so the post slides are facing you.
  • Step-13: Loosely fit the screws connecting the backplate onto the upper pillars. Do not fully tighten hardware at this point.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-11

  • Step-15: Starting from the top, working to the bottom, tighten all hardware with the provided hex wrench.
  • Step-16: The Left and Right Mounting Strips are installed on your flat panel screen using your own VESA mounting bolts and hung onto the Backplate.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-12

Anti-Tip Bar Instruction

  • Anti-tip supports are factory installed in the base of the cart.
  • They need to be deployed prior to the installation of the panel and when the cart is in any stationary position.
  • To remove the bars, loosen the thumb screws located in the bar socket.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-17

  • Pull the bars straight out.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-18

  • Rotate the bars 90 degrees and re-insert the bars until they are seated.
  • Retighten the thump under underneath the cart.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-19

  • Photo shows bars that have been properly installed.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-20

Casters Positions

  • This cart is equipped with Casters that have an “Blue” color foot pedal.
  • Engage the Directional Locking Casters by pressing the blue foot pedal down. Your cart will now easily track in a straight line.
  • Release the Direction Lock by lifting up on the foot pedal. The cart will have its full swivel motion restored.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-13

  • “Engage the BLACK foot pedal to securely lock the wheels, keeping the cart safely in place.”

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-14

  • “Engage the blue foot pedal for a seamless and precise straight-line movement, making navigation a breeze.”

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-15

  • “With a simple release of the BLACK foot pedal, allowing you to navigate effortless with unparalleled flexibility.”
  • “With a simple release of the blue foot pedal, embrace a world of precision and grace in your swivel motion, making maneuvering a breeze.”

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-16

Safety Instructions

THIS IS NOT A TOY. ALWAYS FOLLOW SAFETY INSTRUCTIONS.

WARNING

  • THE ELECTRICAL SYSTEM IS DESIGNED TO HANDLE A MAXIMUM OF 1500 WATTS.
    If wattage exceeds 1500W at one time, the charging system may not operate correctly. Remove devices until the total wattage is under 1500W.
  • ALWAYS FOLLOW SAFETY PRECAUTIONS. 
    • ONLY ADULTS should move the stand.
    • NEVER climb, sit on or tilt the stand.
    • ALWAYS move the cart slowly and be aware of your surroundings.
    • ALWAYS extend and secure tilt bars to avoid tipping.
    • DO NOT mount any panel over 75”.
    • DO NOT mount any panel over 120lbs.
    • DO NOT remove this decal.
    • NEVER run over the cord.
    • NEVER cross thresholds at an unsafe speed.
    • ALWAYS set the cater break when done moving.
    • DO NOT touch any part of the electrical system while plugged in.
    • DO NOT connect the stand with broken electrical components.
    • DO NOT use an extension cord with this unit.

WARRANTY

  • For warranty claims, please have the following information ready, then visit : www.powertechnologies.com
  • To create a help ticket.

    Power-Technologies-AC-STAND-75-Interactive-Flat-Panel-Stand,-Cart-fig-21

Further Information

For further information on this product and others, contact Power Technologies at.

Documents / Resources

Power Technologies AC-STAND-75 Interactive Flat Panel Stand, Cart [pdf] User Manual
AC-STAND-75, AC-STAND-75 Interactive Flat Panel Stand Cart, AC-STAND-75 Flat Panel Stand Cart, Interactive Flat Panel Stand Cart, Flat Panel Stand Cart, Flat Stand Cart, Panel Stand Cart, Stand Cart, Stand, Cart

References

Leave a comment

Your email address will not be published. Required fields are marked *