IP2366 Step-Down Power Module Main Controller

Warning
Features
- The IP2366 controller chip handles overall control and coordination, providing more stable output and more responsive performance.
- Quickly configure parameters via DIP switches—no need to repeatedly solder resistors, saving time during setup.
- Synchronous buck-boost MOSFETs: Four MOSFETs work in tandem to improve efficiency and reduce heat generation
- 10-position DIP switch for quick configuration; easily switch between three output levels: 65W, 100W, and 140W
- This product supports 2-6S battery configurations, allowing for flexible user adaptation
- Built-in multiple protections including overvoltage, overcurrent, short circuit, and over temperature, providing comprehensive protection for added peace of mind
Parameter Display: 0.96-inch color display
Parameter Viewing: Real-time display of voltage, current, power, etc.
Fast Charging Protocols: PPS/PD/SCP/FCP/QC/AFC/PE/BC1.2
Display: 0.96-inch TFT color screen, ST7735, 80×160
Button Controls: S1 (Up/Decrease), S2 (Confirm/Long Press to Return), S3 (Down/Increase)
Supports 2-6S battery cell configuration
Supports 3.65V/4.2V battery voltage settings
Supports three power settings: 65W, 100W, and 140W
Supports lithium iron phosphate (LiFePO4) and ternary lithium batteries
Package include Fast Charging Module * 1
Parameter Viewing: Real-time display of voltage, current, power, etc.
Fast Charging Protocols: PPS/PD/SCP/FCP/QC/AFC/PE/BC1.2
Display: 0.96-inch TFT color screen, ST7735, 80×160
Button Controls: S1 (Up/Decrease), S2 (Confirm/Long Press to Return), S3 (Down/Increase)
Supports 2-6S battery cell configuration
Supports 3.65V/4.2V battery voltage settings
Supports three power settings: 65W, 100W, and 140W
Supports lithium iron phosphate (LiFePO4) and ternary lithium batteries
Package include Fast Charging Module * 1
With Display

Display not included

More stable output and more sensitive response
The IP2366 main control chip is responsible for the overall control and coordination of the machine

Quickly configure parameters through dip switch
No need to repeatedly weld resistors, setting is more time-saving

Synchronous buck boost MOS transistor
Four MOS working together to improve efficiency and reduce heat generation

Quick configuration of 10 digit dialing code
65W/100W/140W three level output can be switched freely

Users can flexibly adapt
This product covers 2-6S battery solutions

Comprehensive protection brings peace of mind
Comes with multiple protections such as overvoltage/overcurrent short circuit/overheating


IP2366 Step-Down Power Module

Flexible Configuration One-Click Setup

Three-Channel Power Efficiency Management

Multi-Cell Battery Flexible Matching

See the Details Pass the Test with Confidence

Two Versions Available Choose as Needed

Color Display


10-Digit DIP Switch Settings

Explanation of Positive and Negative Terminals


Product parameters
| Display mode: 0.96-inch color display screen | Display mode: 0.96-inch color display screen | Fast charging protocol: PPS/PD/SCP/FCP QC/AFC/PE/BC1.2 |
| Display screen: 0.96-inch TFT color screen ST7735 80×160 | Button control: S1 up/down S2 confirm/long press to return S3 down/add | Supports 2-6S batteries Serial number setting |
| Supports 3.65V/4.2V Battery voltage setting | Supports 65W/100W 140W three power settings | Support lithium iron phosphate ternary lithium battery |

Screen Interface Overview

Open Source Explanation

Documents / Resources
![]() | IP2366 Step-Down Power Module Main Controller |
References
- User Manualmanual.tools
Published: November 14, 2026
Updated: November 17, 2026
