POTTER PIR-TECT 2 Dual Technology External Motion Detector
POTTER PIR-TECT 2 Dual Technology External Motion Detector

Features

  • Dual technology PIR/Microwave
  • Used for intruder monitoring, camera control, and to activate other alarm warning devices
  • Field programmable beam range (30ft, 65ft, 98ft)
  • Aesthetically pleasing modern design
  • Sliding curtains for masking
  • High immunity to common false alarm triggers
  • Flexible mounting height up to 20ft (10ft optimal)
  • Dual tamper for rear and cover
  • Internal adjustable pan (180 degree) & tilt (90 degree) electronics module
    Stock number: 4100002

Description

The PIR-TECT 2 motion detector is a highly versatile external motion detector. The PIR-TECT 2 simplifies project design by offering the ability to program a single unit as a short-range, mid-range, or long-range detector in the field. In addition, the flexible mounting height along with the adjustable pan and tilt module allow the view of a security camera and the PIR-TECT sensor to coincide, providing more accurate threat detection. Through the use of advanced signal processing, PIR-TECT 2 has exceptional resistance to false alarms which enhances detection and reduces unnecessary responses.
Through the use of advanced signal processing combined with the dual PIR/Mircrowave technology, the PIR-TECT 2 has exceptional resistance to false alarms.

Specifications

The flexibility of the PIR-TECT external motion detectors are enhanced with the additional accessories.

Model Number Stock Number Description
PIR-305 4100005 Conduit adaptor ring
PIR-306 4100006 Pole mount clamp
PIR-307 4100007 Walk tester
Detection Area Programmable between 33 and 98 ft
Coverage 10-70 degrees detection angle, 98ft x 79ft coverage max
Adjustment 180 degree pan and 90 degree tilt
Fresnel Lens 28 zones for each pyro pair, which can be masked with the curtain sliders
Customized Optics Double silicone shielded quad element eliminates 50,000 lux of white light
Outputs Silent solid state magnetically immune
No.1 (N.O.) Dry contact 24VAC/DC @ 50mA
No.2 (N.C.) Dry contact 24VAC/DC @ 50mA
Power Input 9 to 15 VDC
Current 8mA (1 2V nominal)
Pulse Count 1 – 2
Temp. Compensation Digital sensitivity adjustment
Control Digital microprocessor – non volatile memory
Walk Test Output test mode with LED indication
Operating Temp -4°F to 149°F
Housing High impact zinc alloy
Lens High Density Polyethylene
Protection Rating lP 55
Dimensions 5.71 x 4.72 x 4.52 inches

Mounting

Mounting
Mounting

Customer Service

Potter Electric Signal Co., LLC • St. Louis, MO
Cust Service: 866-240-1870
Tech Support:866-956-1211
Canada 888-882-1833
www.pottersignal.com

POTTER

Documents / Resources

POTTER PIR-TECT 2 Dual Technology External Motion Detector [pdf] Owner's Manual
PIR-TECT 2 Dual Technology External Motion Detector, PIR-TECT 2, Dual Technology External Motion Detector, External Motion Detector

References

Leave a comment

Your email address will not be published. Required fields are marked *