Posey 8007 Supportive Surface
Product Specifications
- Model: Posey Support Surface
- Model Number: 8007
- Dimensions: 82L x 36W x 1Thick (208 cm x 91 cm x 3 cm)
Product Information
- The Posey Support Surface is designed for use on all types of beds.
- It is suitable for patients who are at risk for skin breakdown and require an additional support surface on a hospital bed.
- Additionally, the support surface helps hold sheets in place.
- Wipe the Posey Support Surface clean with an intermediate-level disinfectant to maintain hygiene.
- This device is intended for use in normal indoor environments.
- It can be stored in ambient warehouse temperatures with normal humidity levels.
- Avoid exposing the device to excess moisture or high humidity as it may damage the product materials.
- Properly dispose of the Posey Support Surface according to the facility’s policy for BIOHAZARDOUS materials to ensure safe disposal.
FAQ
Q: Can the Posey Support Surface be used with all types of beds?
A: Yes, the Posey Support Surface is designed for use on all types of beds.
Q: How should I clean the support surface?
A: Wipe the support surface clean with an intermediate-level disinfectant.
Q: What are the storage recommendations for this product?
A: Store the device in normal indoor environments with ambient warehouse temperatures and normal humidity levels. Avoid excess moisture or high humidity.
Q: How should I dispose of the Posey Support Surface?
A: Properly dispose of the product following the facility's policy for BIOHAZARDOUS materials.
Introduction
The Posey Support Surface is designed for use on all types of beds and can be used with patients who may be at risk for skin breakdown and need an additional support surface on a hospital bed. Support Surface also helps hold sheets in place.
- REF 8007 82”L x 36”W x 1”Thick (208 cm x 91 cm x 3 cm)
Features
- Durable cover is made of a 4-way stretch material that is both comfortable and waterproof.
- Constructed of comfortable and durable polyurethane foam.
- Lightweight design helps prevent entrapment.
- Meets CA #117, Section E Flame Retardancy Standards.
Cleaning Instructions
- Wipe Clean with intermediate-level disinfectant.
Storage and Handling
- This device is designed for use in normal indoor environments.
- This device may be stored in ambient warehouse temperatures at normal humidity levels.
- Avoid excess moisture or high humidity that may damage product materials.
Disposal
WARNING: Properly dispose of the product per the facility’s policy for BIOHAZARDOUS materials.
CONTACT
- TIDI Products, LLC
- 570 Enterprise Drive, Neenah, WI 54956 USA
- Phone: 1.800.521.1314
- International: +1.920.751.4036
- www.tidiproducts.com
- ASSEMBLED IN MEXICO
© 2024 TIDI Products, LLC. All rights reserved. Posey is a registered trademark of TIDI Products, LLC.
Documents / Resources
 | 8007 Supportive Surface |
References
- Medical Products for Staff & Patient Safety | TIDI Productswww.tidiproducts.com
- User Manualmanual.tools
Published: July 14, 2024